I am trying to install gargoyle on nanopi r2s.
Here is bootlog from openwrt installed:
Code: Select all
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒
U-Boot TPL 2021.07-OpenWrt-r20028-43d71ad93e (Jan 03 2023 - 00:24:21)
DDR4, 333MHz
BW=32 Col=10 Bk=4 BG=2 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2021.07-OpenWrt-r20028-43d71ad93e (Jan 03 2023 - 00:24:21 +0000)
Trying to boot from MMC1
NOTICE: BL31: v2.3():v2.3
NOTICE: BL31: Built : 15:56:43, Apr 20 2020
NOTICE: BL31:Rockchip release version: v1.2
U-Boot 2021.07-OpenWrt-r20028-43d71ad93e (Jan 03 2023 - 00:24:21 +0000) OpenWrt
Model: FriendlyElec NanoPi R2S
DRAM: 1022 MiB
PMIC: RK8050 (on=0x40, off=0x00)
MMC: mmc@ff500000: 1
Loading Environment from MMC... MMC Device 0 not found
*** Warning - No MMC card found, using default environment
In: serial@ff130000
Out: serial@ff130000
Err: serial@ff130000
Model: FriendlyElec NanoPi R2S
Net: eth0: ethernet@ff540000
Hit any key to stop autoboot: 0
MMC Device 0 not found
no mmc device at slot 0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot.scr
352 bytes read in 4 ms (85.9 KiB/s)
## Executing script at 00500000
36620 bytes read in 6 ms (5.8 MiB/s)
14632968 bytes read in 645 ms (21.6 MiB/s)
Moving Image from 0x2080000 to 0x2200000, end=30b0000
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Device Tree to 000000003df25000, end 000000003df30f0b ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.10.161 (builder@buildhost) (aarch64-openwrt-linux -musl-gcc (OpenWrt GCC 11.2.0 r20028-43d71ad93e) 11.2.0, GNU ld (GNU Binutils) 2 .37) #0 SMP PREEMPT Tue Jan 3 00:24:21 2023
[ 0.000000] Machine model: FriendlyElec NanoPi R2S
[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff130000 (options '')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x000000003fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x000000003fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000003fffffff]
[ 0.000000] cma: Reserved 8 MiB at 0x000000003f400000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 21 pages/cpu s46744 r8192 d31080 u86016
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 257544
[ 0.000000] Kernel command line: console=ttyS2,1500000 earlycon=uart8250,mmio 32,0xff130000 root=PARTUUID=5452574f-02 rw rootwait
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, li near)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1002740K/1046528K available (8510K kernel code, 2386K rwd ata, 1580K rodata, 1728K init, 726K bss, 35596K reserved, 8192K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif fies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 43980 46511097ns
[ 0.001425] Console: colour dummy device 80x25
[ 0.001913] Calibrating delay loop (skipped), value calculated using timer fr equency.. 48.00 BogoMIPS (lpj=240000)
[ 0.002890] pid_max: default: 32768 minimum: 301
[ 0.003557] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, line ar)
[ 0.004258] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.007436] rcu: Hierarchical SRCU implementation.
[ 0.008220] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[ 0.009902] smp: Bringing up secondary CPUs ...
[ 0.011075] Detected VIPT I-cache on CPU1
[ 0.011178] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.012000] Detected VIPT I-cache on CPU2
[ 0.012077] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.012884] Detected VIPT I-cache on CPU3
[ 0.012956] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.013092] smp: Brought up 1 node, 4 CPUs
[ 0.016419] SMP: Total of 4 processors activated.
[ 0.016865] CPU features: detected: 32-bit EL0 Support
[ 0.017352] CPU features: detected: CRC32 instructions
[ 0.018261] CPU: All CPU(s) started at EL2
[ 0.018675] alternatives: patching kernel code
[ 0.029994] KASLR disabled due to lack of seed
[ 0.030645] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns
[ 0.031577] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.032819] pinctrl core: initialized pinctrl subsystem
[ 0.035226] NET: Registered protocol family 16
[ 0.038616] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.039500] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allo cations
[ 0.040438] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic al locations
[ 0.042207] thermal_sys: Registered thermal governor 'step_wise'
[ 0.042217] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.043174] cpuidle: using governor menu
[ 0.044283] ASID allocator initialised with 65536 entries
[ 0.044995] Serial: AMBA PL011 UART driver
[ 0.075663] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.076309] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.076936] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.077566] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.080344] cryptd: max_cpu_qlen set to 1000
[ 0.082925] reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517
[ 0.084935] iommu: Default domain type: Translated
[ 0.086823] SCSI subsystem initialized
[ 0.087459] usbcore: registered new interface driver usbfs
[ 0.088026] usbcore: registered new interface driver hub
[ 0.088575] usbcore: registered new device driver usb
[ 0.091097] clocksource: Switched to clocksource arch_sys_counter
[ 0.092081] VFS: Disk quotas dquot_6.6.0
[ 0.092531] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.098316] NET: Registered protocol family 2
[ 0.099005] IP idents hash table entries: 16384 (order: 5, 131072 bytes, line ar)
[ 0.101631] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.102469] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.103300] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear )
[ 0.104163] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.104957] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.105623] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.106582] NET: Registered protocol family 1
[ 0.107032] PCI: CLS 0 bytes, default 64
[ 0.113125] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.122513] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.123080] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_ PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.125997] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 52)
[ 0.126999] io scheduler mq-deadline registered
[ 0.133999] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
[ 0.134651] dma-pl330 ff1f0000.dmac: DBUFF-128x8bytes Num_Chans-8 Num _Peri-20 Num_Events-16
[ 0.138149] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.142678] printk: console [ttyS2] disabled
[ 0.143181] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 20, base_baud = 1500000) is a 16550A
[ 0.144143] printk: console [ttyS2] enabled
[ 0.144143] printk: console [ttyS2] enabled
[ 0.144909] printk: bootconsole [uart8250] disabled
[ 0.144909] printk: bootconsole [uart8250] disabled
[ 0.155128] loop: module loaded
[ 0.155435] mtip32xx Version 1.3.1
[ 0.155910] Loading iSCSI transport class v2.0-870.
[ 0.160841] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found
[ 0.161480] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found
[ 0.162208] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock
[ 0.162776] rk_gmac-dwmac ff540000.ethernet: phy regulator is not available y et, deferred probing
[ 0.166708] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.167302] ehci-pci: EHCI PCI platform driver
[ 0.167768] ehci-platform: EHCI generic platform driver
[ 0.170697] ehci-platform ff5c0000.usb: EHCI Host Controller
[ 0.171254] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 1
[ 0.172132] ehci-platform ff5c0000.usb: irq 36, io mem 0xff5c0000
[ 0.201103] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
[ 0.202350] hub 1-0:1.0: USB hub found
[ 0.202724] hub 1-0:1.0: 1 port detected
[ 0.203772] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.204365] ohci-platform: OHCI generic platform driver
[ 0.205294] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
[ 0.205907] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 2
[ 0.206798] ohci-platform ff5d0000.usb: irq 37, io mem 0xff5d0000
[ 0.275795] hub 2-0:1.0: USB hub found
[ 0.276181] hub 2-0:1.0: 1 port detected
[ 0.277806] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.278325] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus nu mber 3
[ 0.279227] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 0.280126] xhci-hcd xhci-hcd.0.auto: irq 43, io mem 0xff600000
[ 0.281619] hub 3-0:1.0: USB hub found
[ 0.282000] hub 3-0:1.0: 1 port detected
[ 0.282744] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.283246] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus nu mber 4
[ 0.283937] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 0.284587] usb usb4: We don't know the algorithms for LPM for this host, dis abling LPM.
[ 0.285817] hub 4-0:1.0: USB hub found
[ 0.286185] hub 4-0:1.0: 1 port detected
[ 0.287100] usbcore: registered new interface driver usb-storage
[ 0.287812] i2c /dev entries driver
[ 0.291641] rk808 1-0018: chip id: 0x8050
[ 0.299291] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 0.299884] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 0.302275] vdd_log: supplied by vdd_5v
[ 0.304729] vdd_arm: supplied by vdd_5v
[ 0.305341] vcc_ddr: supplied by vdd_5v
[ 0.306896] vcc_io_33: supplied by vdd_5v
[ 0.309221] vcc_18: supplied by vcc_io_33
[ 0.313409] vcc18_emmc: supplied by vcc_io_33
[ 0.317647] vdd_10: supplied by vdd_5v
[ 0.329073] rk808-rtc rk808-rtc: registered as rtc0
[ 0.331262] rk808-rtc rk808-rtc: setting system clock to 2016-01-21T08:50:09 UTC (1453366209)
[ 0.332630] i2c i2c-1: of_i2c: modalias failure on /i2c@ff160000/usb
[ 0.333205] i2c i2c-1: Failed to create I2C device for /i2c@ff160000/usb
[ 0.337739] cpu cpu0: EM: created perf domain
[ 0.340132] sdhci: Secure Digital Host Controller Interface driver
[ 0.340696] sdhci: Copyright(c) Pierre Ossman
[ 0.341215] Synopsys Designware Multimedia Card Interface Driver
[ 0.342002] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.342538] dwmmc_rockchip ff500000.mmc: IDMAC supports 32-bit address mode.
[ 0.343210] dwmmc_rockchip ff500000.mmc: Using internal DMA controller.
[ 0.343802] dwmmc_rockchip ff500000.mmc: Version ID is 270a
[ 0.344393] dwmmc_rockchip ff500000.mmc: DW MMC controller at irq 33,32 bit h ost data width,256 deep fifo
[ 0.345764] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.346679] hid: raw HID events driver (C) Jiri Kosina
[ 0.347302] usbcore: registered new interface driver usbhid
[ 0.347793] usbhid: USB HID core driver
[ 0.349531] NET: Registered protocol family 10
[ 0.351364] Segment Routing with IPv6
[ 0.351789] NET: Registered protocol family 17
[ 0.352270] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 0.353400] 8021q: 802.1Q VLAN Support v1.8
[ 0.370706] vcc_sd: supplied by vcc_io_33
[ 0.374511] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found
[ 0.375111] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found
[ 0.375787] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock
[ 0.376448] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input).
[ 0.377069] rk_gmac-dwmac ff540000.ethernet: TX delay(0x24).
[ 0.377566] rk_gmac-dwmac ff540000.ethernet: RX delay(0x18).
[ 0.378072] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no).
[ 0.378648] rk_gmac-dwmac ff540000.ethernet: cannot get clock clk_mac_speed
[ 0.379256] rk_gmac-dwmac ff540000.ethernet: clock input from PHY
[ 0.384802] rk_gmac-dwmac ff540000.ethernet: init for RGMII
[ 0.385745] rk_gmac-dwmac ff540000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[ 0.386386] rk_gmac-dwmac ff540000.ethernet: DWMAC1000
[ 0.386850] rk_gmac-dwmac ff540000.ethernet: DMA HW capability register suppo rted
[ 0.387506] rk_gmac-dwmac ff540000.ethernet: RX Checksum Offload Engine suppo rted
[ 0.388163] rk_gmac-dwmac ff540000.ethernet: COE Type 2
[ 0.388623] rk_gmac-dwmac ff540000.ethernet: TX Checksum insertion supported
[ 0.389241] rk_gmac-dwmac ff540000.ethernet: Wake-Up On Lan supported
[ 0.389807] rk_gmac-dwmac ff540000.ethernet: Normal descriptors
[ 0.390328] rk_gmac-dwmac ff540000.ethernet: Ring mode enabled
[ 0.390840] rk_gmac-dwmac ff540000.ethernet: Enable RX Mitigation via HW Watc hdog Timer
[ 0.555463] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout, ignoring dependency
[ 0.555949] dwmmc_rockchip ff500000.mmc: IDMAC supports 32-bit address mode.
[ 0.556906] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[ 0.556929] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[ 0.557653] dwmmc_rockchip ff500000.mmc: Using internal DMA controller.
[ 0.558893] dwmmc_rockchip ff500000.mmc: Version ID is 270a
[ 0.559451] dwmmc_rockchip ff500000.mmc: DW MMC controller at irq 33,32 bit h ost data width,256 deep fifo
[ 0.560877] dw-apb-uart ff130000.serial: forbid DMA for kernel console
[ 0.569114] rockchip-pm-domain ff100000.syscon:power-controller: failed to ge t ack on domain 'power-domain', val=0x88220
[ 0.579091] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.593108] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout, ignoring dependency
[ 0.594131] Waiting for root device PARTUUID=5452574f-02...
[ 0.651378] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 0.653468] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 1500000 00Hz, actual 150000000HZ div = 0)
[ 0.701550] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout, ignoring dependency
[ 1.351171] dwmmc_rockchip ff500000.mmc: Successfully tuned phase to 75
[ 1.351821] mmc0: new ultra high speed SDR104 SDHC card at address 0007
[ 1.353839] mmcblk0: mmc0:0007 SD32G 29.9 GiB
[ 1.356761] mmcblk0: p1 p2
[ 1.357828] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout, ignoring dependency
[ 1.382951] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fs ck is recommended
[ 2.100096] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (n ull)
[ 2.100870] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 2.102950] Freeing unused kernel memory: 1728K
[ 2.103508] Run /sbin/init as init process
[ 2.153873] init: Console is alive
[ 2.231696] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.240395] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout, ignoring dependency
[ 2.242583] kmodloader: done loading kernel modules from /etc/modules-boot.d/ *
[ 2.246128] init: - preinit -
[ 2.411523] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.441561] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.498309] random: jshn: uninitialized urandom read (4 bytes read)
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 6.638444] mount_root: mounting /dev/root
[ 6.642324] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 6.692228] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n ull)
[ 6.703545] urandom-seed: Seeding with /etc/urandom.seed
[ 6.725464] procd: - early -
[ 7.289859] procd: - ubus -
[ 7.299031] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.340819] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.342285] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.345505] procd: - init -
Please press Enter to activate this console.
[ 7.489220] urngd: v1.0.2 started.
[ 7.512867] random: crng init done
[ 7.513208] random: 23 urandom warning(s) missed due to ratelimiting
[ 7.534508] kmodloader: loading kernel modules from /etc/modules.d/*
[ 7.559004] usbcore: registered new interface driver r8152
[ 7.562744] usbcore: registered new interface driver cdc_ether
[ 7.564757] usbcore: registered new interface driver cdc_ncm
[ 7.592227] PPP generic driver version 2.4.2
[ 7.593759] NET: Registered protocol family 24
[ 7.599566] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 7.757068] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hc d
[ 7.799151] r8152 4-1:1.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00
[ 7.800003] r8152 4-1:1.0 (unnamed net_device) (uninitialized): Random ether addr d2:fb:33:0b:3f:d5
[ 7.827377] r8152 4-1:1.0: load rtl8153b-2 v1 10/23/19 successfully
[ 7.872807] r8152 4-1:1.0 eth1: v1.11.11
[ 7.873800] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout, ignoring dependency
[ 10.598492] br-lan: port 1(eth1) entered blocking state
[ 10.599000] br-lan: port 1(eth1) entered disabled state
[ 10.599871] device eth1 entered promiscuous mode
[ 10.603656] br-lan: port 1(eth1) entered blocking state
[ 10.604169] br-lan: port 1(eth1) entered forwarding state
[ 10.692483] rk_gmac-dwmac ff540000.ethernet eth0: PHY [stmmac-0:01] driver [R TL8211E Gigabit Ethernet] (irq=POLL)
[ 10.701263] rk_gmac-dwmac ff540000.ethernet eth0: No Safety Features support found
[ 10.701987] rk_gmac-dwmac ff540000.ethernet eth0: PTP not supported by HW
[ 10.703323] rk_gmac-dwmac ff540000.ethernet eth0: configuring for phy/rgmii l ink mode
[ 11.591841] br-lan: port 1(eth1) entered disabled state
Here are serial log from what happens when i try to upgrade from openwrt to gargoyle with gargoyle_1.15.x-rockchip-armv8-friendlyarm_nanopi-r2s-squashfs-sysupgrade.img.gz on webif in openwrt.
Code: Select all
Thu Jan 21 08:51:08 UTC 2016 upgrade: Sending TERM to remaining processes ...
Thu Jan 21 08:51:12 UTC 2016 upgrade: Sending KILL to remaining processes ...
[ 69.461503] stage2 (2487): drop_caches: 3
Thu Jan 21 08:51:18 UTC 2016 upgrade: Switching to ramdisk...
[ 71.306309] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Thu Jan 21 08:51:20 UTC 2016 upgrade: Performing system upgrade...
Thu Jan 21 08:51:20 UTC 2016 upgrade: Reading partition table from bootdisk...
0+1 records in
0+1 records out
zcat: write error: Broken pipe
zcat: write: Broken pipe
Thu Jan 21 08:51:20 UTC 2016 upgrade: Reading partition table from image...
Writing image to /dev/mmcblk0p1...
zcat: write error: Broken pipe
zcat: write: Broken pipe
32768+0 records in
16+0 records out
Writing image to /dev/mmcblk0p2...
212992+0 records in
104+0 records out
Writing new UUID to /dev/mmcblk0...
zcat: write error: Broken pipe
zcat: write: Broken pipe
Thu Jan 21 08:51:27 UTC 2016 upgrade: Upgrade completed
Thu Jan 21 08:51:28 UTC 2016 upgrade: Rebooting system...
umount: can't unmount /dev: Resource busy
umount: can't unmount /tmp: Resource busy
[ 80.095373] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 80.095869] usb usb4: USB disconnect, device number 1
[ 80.096331] usb 4-1: USB disconnect, device number 2
[ 80.097995] br-lan: port 1(eth1) entered disabled state
[ 80.102071] device eth1 left promiscuous mode
[ 80.102504] br-lan: port 1(eth1) entered disabled state
[ 80.283262] xhci-hcd xhci-hcd.0.auto: USB bus 4 deregistered
[ 80.283817] xhci-hcd xhci-hcd.0.auto: remove, state 4
[ 80.284288] usb usb3: USB disconnect, device number 1
[ 80.286138] xhci-hcd xhci-hcd.0.auto: USB bus 3 deregistered
[ 80.287447] reboot: Restarting system
U-Boot TPL 2021.07-OpenWrt-r20028-43d71ad93e (Jan 03 2023 - 00:24:21)
DDR4, 333MHz
BW=32 Col=10 Bk=4 BG=2 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2021.07-OpenWrt-r20028-43d71ad93e (Jan 03 2023 - 00:24:21 +0000)
Trying to boot from MMC1
NOTICE: BL31: v2.3():v2.3
NOTICE: BL31: Built : 15:56:43, Apr 20 2020
NOTICE: BL31:Rockchip release version: v1.2
U-Boot 2021.07-OpenWrt-r20028-43d71ad93e (Jan 03 2023 - 00:24:21 +0000) OpenWrt
Model: FriendlyElec NanoPi R2S
DRAM: 1022 MiB
PMIC: RK8050 (on=0x40, off=0x00)
MMC: mmc@ff500000: 1
Loading Environment from MMC... MMC Device 0 not found
*** Warning - No MMC card found, using default environment
In: serial@ff130000
Out: serial@ff130000
Err: serial@ff130000
Model: FriendlyElec NanoPi R2S
Net: eth0: ethernet@ff540000
Hit any key to stop autoboot: 0
MMC Device 0 not found
no mmc device at slot 0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot.scr
352 bytes read in 3 ms (114.3 KiB/s)
## Executing script at 00500000
36620 bytes read in 5 ms (7 MiB/s)
14501896 bytes read in 640 ms (21.6 MiB/s)
Moving Image from 0x2080000 to 0x2200000, end=3090000
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Device Tree to 000000003df25000, end 000000003df30f0b ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.10.161 (michael@michael-NUC8i7BEH) (aarch64-openw rt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19160+882-7ea2f3d6e2) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP PREEMPT Sun Jan 22 00:35:16 2023
[ 0.000000] Machine model: FriendlyElec NanoPi R2S
[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff130000 (options '')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x000000003fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x000000003fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000003fffffff]
[ 0.000000] cma: Reserved 8 MiB at 0x000000003f400000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 21 pages/cpu s45784 r8192 d32040 u86016
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 257544
[ 0.000000] Kernel command line: console=ttyS2,1500000 earlycon=uart8250,mmio 32,0xff130000 root=PARTUUID=5452574f-02 rw rootwait
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, li near)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1002864K/1046528K available (7870K kernel code, 2322K rwd ata, 2264K rodata, 1664K init, 708K bss, 35472K reserved, 8192K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif fies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 43980 46511097ns
[ 0.001393] Console: colour dummy device 80x25
[ 0.001853] Calibrating delay loop (skipped), value calculated using timer fr equency.. 48.00 BogoMIPS (lpj=240000)
[ 0.002799] pid_max: default: 32768 minimum: 301
[ 0.003443] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, line ar)
[ 0.004127] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.006802] rcu: Hierarchical SRCU implementation.
[ 0.007472] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[ 0.009146] smp: Bringing up secondary CPUs ...
[ 0.010242] Detected VIPT I-cache on CPU1
[ 0.010348] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.011080] Detected VIPT I-cache on CPU2
[ 0.011148] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.011869] Detected VIPT I-cache on CPU3
[ 0.011933] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.012060] smp: Brought up 1 node, 4 CPUs
[ 0.015287] SMP: Total of 4 processors activated.
[ 0.015719] CPU features: detected: 32-bit EL0 Support
[ 0.016189] CPU features: detected: CRC32 instructions
[ 0.016999] CPU: All CPU(s) started at EL2
[ 0.017401] alternatives: patching kernel code
[ 0.028154] KASLR disabled due to lack of seed
[ 0.028913] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns
[ 0.029820] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.031008] pinctrl core: initialized pinctrl subsystem
[ 0.032955] NET: Registered protocol family 16
[ 0.036205] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.037337] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allo cations
[ 0.038260] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic al locations
[ 0.040031] thermal_sys: Registered thermal governor 'step_wise'
[ 0.040041] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.040964] cpuidle: using governor menu
[ 0.042032] ASID allocator initialised with 65536 entries
[ 0.042688] Serial: AMBA PL011 UART driver
[ 0.073037] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.073667] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.074276] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.074885] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.077404] cryptd: max_cpu_qlen set to 1000
[ 0.079545] reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517
[ 0.081524] iommu: Default domain type: Translated
[ 0.083143] SCSI subsystem initialized
[ 0.083761] usbcore: registered new interface driver usbfs
[ 0.084307] usbcore: registered new interface driver hub
[ 0.084837] usbcore: registered new device driver usb
[ 0.087296] clocksource: Switched to clocksource arch_sys_counter
[ 0.088084] VFS: Disk quotas dquot_6.6.0
[ 0.088533] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.094473] NET: Registered protocol family 2
[ 0.095137] IP idents hash table entries: 16384 (order: 5, 131072 bytes, line ar)
[ 0.097186] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.098015] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.098828] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear )
[ 0.099670] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.100499] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.101146] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.102088] NET: Registered protocol family 1
[ 0.102528] PCI: CLS 0 bytes, default 64
[ 0.107924] workingset: timestamp_bits=62 max_order=18 bucket_order=0
[ 0.115683] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.116235] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_ PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.119188] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 52)
[ 0.119876] io scheduler mq-deadline registered
[ 0.126925] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
[ 0.127603] dma-pl330 ff1f0000.dmac: DBUFF-128x8bytes Num_Chans-8 Num _Peri-20 Num_Events-16
[ 0.131100] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.133356] printk: console [ttyS2] disabled
[ 0.133843] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 20, base_baud = 1500000) is a 16550A
[ 0.134766] printk: console [ttyS2] enabled
[ 0.134766] printk: console [ttyS2] enabled
[ 0.135517] printk: bootconsole [uart8250] disabled
[ 0.135517] printk: bootconsole [uart8250] disabled
[ 0.144781] loop: module loaded
[ 0.145085] mtip32xx Version 1.3.1
[ 0.149481] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found
[ 0.150086] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found
[ 0.150807] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock
[ 0.151376] rk_gmac-dwmac ff540000.ethernet: phy regulator is not available y et, deferred probing
[ 0.155335] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.155928] ehci-platform: EHCI generic platform driver
[ 0.158838] ehci-platform ff5c0000.usb: EHCI Host Controller
[ 0.159378] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 1
[ 0.160231] ehci-platform ff5c0000.usb: irq 36, io mem 0xff5c0000
[ 0.197260] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
[ 0.198485] hub 1-0:1.0: USB hub found
[ 0.198858] hub 1-0:1.0: 1 port detected
[ 0.199892] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.200480] ohci-platform: OHCI generic platform driver
[ 0.201406] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
[ 0.202027] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 2
[ 0.202911] ohci-platform ff5d0000.usb: irq 37, io mem 0xff5d0000
[ 0.271931] hub 2-0:1.0: USB hub found
[ 0.272307] hub 2-0:1.0: 1 port detected
[ 0.273838] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.274356] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus nu mber 3
[ 0.275251] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 0.276157] xhci-hcd xhci-hcd.0.auto: irq 43, io mem 0xff600000
[ 0.277591] hub 3-0:1.0: USB hub found
[ 0.277963] hub 3-0:1.0: 1 port detected
[ 0.278705] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.279210] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus nu mber 4
[ 0.279901] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 0.280546] usb usb4: We don't know the algorithms for LPM for this host, dis abling LPM.
[ 0.281779] hub 4-0:1.0: USB hub found
[ 0.282148] hub 4-0:1.0: 1 port detected
[ 0.283043] usbcore: registered new interface driver usb-storage
[ 0.283758] i2c /dev entries driver
[ 0.287574] rk808 1-0018: chip id: 0x8050
[ 0.293273] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 0.293865] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 0.296258] vdd_log: supplied by vdd_5v
[ 0.298772] vdd_arm: supplied by vdd_5v
[ 0.299387] vcc_ddr: supplied by vdd_5v
[ 0.300903] vcc_io_33: supplied by vdd_5v
[ 0.303238] vcc_18: supplied by vcc_io_33
[ 0.307361] vcc18_emmc: supplied by vcc_io_33
[ 0.311604] vdd_10: supplied by vdd_5v
[ 0.322704] rk808-rtc rk808-rtc: registered as rtc0
[ 0.324884] rk808-rtc rk808-rtc: setting system clock to 2016-01-21T08:51:38 UTC (1453366298)
[ 0.326249] i2c i2c-1: of_i2c: modalias failure on /i2c@ff160000/usb
[ 0.326825] i2c i2c-1: Failed to create I2C device for /i2c@ff160000/usb
[ 0.331190] cpu cpu0: EM: created perf domain
[ 0.333385] sdhci: Secure Digital Host Controller Interface driver
[ 0.333946] sdhci: Copyright(c) Pierre Ossman
[ 0.334332] Synopsys Designware Multimedia Card Interface Driver
[ 0.335157] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.335793] dwmmc_rockchip ff500000.mmc: IDMAC supports 32-bit address mode.
[ 0.336451] dwmmc_rockchip ff500000.mmc: Using internal DMA controller.
[ 0.337039] dwmmc_rockchip ff500000.mmc: Version ID is 270a
[ 0.337609] dwmmc_rockchip ff500000.mmc: DW MMC controller at irq 33,32 bit h ost data width,256 deep fifo
[ 0.339043] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.340012] usbcore: registered new interface driver usbhid
[ 0.340506] usbhid: USB HID core driver
[ 0.341845] NET: Registered protocol family 10
[ 0.343202] Segment Routing with IPv6
[ 0.343600] NET: Registered protocol family 17
[ 0.344032] 8021q: 802.1Q VLAN Support v1.8
[ 0.359546] vcc_sd: supplied by vcc_io_33
[ 0.362901] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found
[ 0.363495] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found
[ 0.364169] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock
[ 0.364834] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input).
[ 0.365455] rk_gmac-dwmac ff540000.ethernet: TX delay(0x24).
[ 0.365952] rk_gmac-dwmac ff540000.ethernet: RX delay(0x18).
[ 0.366460] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no).
[ 0.367034] rk_gmac-dwmac ff540000.ethernet: cannot get clock clk_mac_speed
[ 0.367910] rk_gmac-dwmac ff540000.ethernet: clock input from PHY
[ 0.373461] rk_gmac-dwmac ff540000.ethernet: init for RGMII
[ 0.374442] rk_gmac-dwmac ff540000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[ 0.375080] rk_gmac-dwmac ff540000.ethernet: DWMAC1000
[ 0.375542] rk_gmac-dwmac ff540000.ethernet: DMA HW capability register suppo rted
[ 0.376197] rk_gmac-dwmac ff540000.ethernet: RX Checksum Offload Engine suppo rted
[ 0.376852] rk_gmac-dwmac ff540000.ethernet: COE Type 2
[ 0.377335] rk_gmac-dwmac ff540000.ethernet: TX Checksum insertion supported
[ 0.377953] rk_gmac-dwmac ff540000.ethernet: Wake-Up On Lan supported
[ 0.378517] rk_gmac-dwmac ff540000.ethernet: Normal descriptors
[ 0.379038] rk_gmac-dwmac ff540000.ethernet: Ring mode enabled
[ 0.379551] rk_gmac-dwmac ff540000.ethernet: Enable RX Mitigation via HW Watc hdog Timer
[ 0.540364] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout, ignoring dependency
[ 0.540984] dwmmc_rockchip ff500000.mmc: IDMAC supports 32-bit address mode.
[ 0.541480] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[ 0.541808] dwmmc_rockchip ff500000.mmc: Using internal DMA controller.
[ 0.542471] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[ 0.543049] dwmmc_rockchip ff500000.mmc: Version ID is 270a
[ 0.544264] dwmmc_rockchip ff500000.mmc: DW MMC controller at irq 33,32 bit h ost data width,256 deep fifo
[ 0.546129] dw-apb-uart ff130000.serial: forbid DMA for kernel console
[ 0.555126] rockchip-pm-domain ff100000.syscon:power-controller: failed to ge t ack on domain 'power-domain', val=0x88220
[ 0.563532] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.577396] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout, ignoring dependency
[ 0.578549] Waiting for root device PARTUUID=5452574f-02...
[ 0.636878] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 1500000 00Hz, actual 150000000HZ div = 0)
[ 1.053095] dwmmc_rockchip ff500000.mmc: Successfully tuned phase to 80
[ 1.053727] mmc0: new ultra high speed SDR104 SDHC card at address 0007
[ 1.055896] mmcblk0: mmc0:0007 SD32G 29.9 GiB
[ 1.058607] mmcblk0: p1 p2
[ 1.059672] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout, ignoring dependency
[ 1.075582] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[ 1.077485] Freeing unused kernel memory: 1664K
[ 1.127598] Run /sbin/init as init process
[ 1.384486] init: Console is alive
[ 2.155432] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.186494] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-d evel@redhat.com
[ 2.195655] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout, ignoring dependency
[ 2.202667] ehci-fsl: Freescale EHCI Host controller driver
[ 2.206418] usbcore: registered new interface driver uas
[ 2.207437] kmodloader: done loading kernel modules from /etc/modules-boot.d/ *
[ 2.213748] init: - preinit -
[ 2.558111] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.583617] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.641328] random: jshn: uninitialized urandom read (4 bytes read)
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 2.857675] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 2.922215] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout, ignoring dependency
[ 6.817904] mount_root: loading kmods from internal overlay
[ 6.842050] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 6.846557] kmodloader: done loading kernel modules from //etc/modules-boot.d /*
[ 7.003717] block: attempting to load /etc/config/fstab
[ 7.010857] block: unable to load configuration (fstab: Entry not found)
[ 7.011579] block: no usable configuration
[ 7.088687] mount_root: overlay filesystem in /dev/loop0 has not been formatt ed yet
[ 7.303611] random: mkfs.ext4: uninitialized urandom read (16 bytes read)
[ 7.304344] random: mkfs.ext4: uninitialized urandom read (16 bytes read)
[ 8.658305] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 8.675508] block: attempting to load /etc/config/fstab
[ 8.676080] block: unable to load configuration (fstab: Entry not found)
[ 8.676715] block: no usable configuration
[ 8.678330] mount_root: overlay filesystem has not been fully initialized yet
[ 8.679883] mount_root: switching to ext4 overlay
[ 8.882429] fuse: init (API version 7.32)
NTFS signature is missing.
Failed to mount '/dev/mmcblk0p1': Invalid argument
The device '/dev/mmcblk0p1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
[ 9.668464] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n ull)
[ 9.684725] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 9.731031] procd: - early -
/etc/init.d/mjpg-streamer: device '/dev/video0' does not exist
[ 10.018926] random: jshn: uninitialized urandom read (4 bytes read)
Failed to connect to ubus
[ 10.094536] random: jshn: uninitialized urandom read (4 bytes read)
Failed to connect to ubus
[ 10.374124] procd: - ubus -
[ 10.434176] random: ubusd: uninitialized urandom read (4 bytes read)
[ 10.442012] procd: - init -
Please press Enter to activate this console.
[ 10.666005] urngd: v1.0.2 started.
[ 10.690179] random: crng init done
[ 10.690518] random: 30 urandom warning(s) missed due to ratelimiting
[ 10.755831] kmodloader: loading kernel modules from /etc/modules.d/*
[ 10.861101] Key type dns_resolver registered
[ 10.878435] RPC: Registered named UNIX socket transport module.
[ 10.878974] RPC: Registered udp transport module.
[ 10.879385] RPC: Registered tcp transport module.
[ 10.879799] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.891280] tun: Universal TUN/TAP device driver, 1.6
[ 10.906919] gre: GRE over IPv4 demultiplexor driver
[ 10.909288] ip_gre: GRE over IPv4 tunneling driver
[ 10.932604] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 10.940339] NFS: Registering the id_resolver key type
[ 10.940832] Key type id_resolver registered
[ 10.941202] Key type id_legacy registered
[ 11.014152] videodev: Linux video capture interface: v2.00
[ 11.019794] GACT probability on
[ 11.021637] Mirror/redirect action on
[ 11.032837] u32 classifier
[ 11.033099] input device check on
[ 11.033423] Actions configured
[ 11.046842] Simple TC action Loaded
[ 11.072185] usbcore: registered new interface driver cdc_acm
[ 11.072704] cdc_acm: USB Abstract Control Model driver for USB modems and ISD N adapters
[ 11.074968] usbcore: registered new interface driver cdc_wdm
[ 11.076832] Loading modules backported from Linux version v5.15.81-0-ge4a7232 c917c
[ 11.077614] Backport generated by backports.git v5.15.81-1-0-ge1867d55
[ 11.097055] usbcore: registered new interface driver ipheth
[ 11.186869] usbcore: registered new interface driver ums-alauda
[ 11.188750] usbcore: registered new interface driver ums-cypress
[ 11.190750] usbcore: registered new interface driver ums-datafab
[ 11.192429] usbcore: registered new interface driver ums-freecom
[ 11.194141] usbcore: registered new interface driver ums-isd200
[ 11.195885] usbcore: registered new interface driver ums-jumpshot
[ 11.197880] usbcore: registered new interface driver ums-karma
[ 11.200059] usbcore: registered new interface driver ums-sddr09
[ 11.202000] usbcore: registered new interface driver ums-sddr55
[ 11.203900] usbcore: registered new interface driver ums-usbat
[ 11.205867] usbcore: registered new interface driver usblp
[ 11.221657] usbcore: registered new interface driver usbserial_generic
[ 11.222353] usbserial: USB Serial support registered for generic
[ 11.306440] xt_time: kernel timezone is -0000
[ 11.310717] usbcore: registered new interface driver cdc_ether
[ 11.317745] usbcore: registered new interface driver cdc_ncm
[ 11.394504] gspca_main: v2.14.0 registered
[ 11.402249] usbcore: registered new interface driver ov534
[ 11.406222] usbcore: registered new interface driver gspca_zc3xx
[ 11.409327] usbcore: registered new interface driver huawei_cdc_ncm
[ 11.489106] PPP generic driver version 2.4.2
[ 11.509539] NET: Registered protocol family 24
[ 11.512789] PPTP driver version 0.8.5
[ 11.516839] usbcore: registered new interface driver qmi_wwan
[ 11.521919] usbcore: registered new interface driver rndis_host
[ 11.524625] usbcore: registered new interface driver sierra
[ 11.525278] usbserial: USB Serial support registered for Sierra USB modem
[ 11.528356] usbcore: registered new interface driver sierra_net
[ 11.542085] usbcore: registered new interface driver uvcvideo
[ 11.542614] USB Video Class driver (1.1.1)
[ 11.548282] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for info rmation.
[ 11.548993] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c 4.com>. All Rights Reserved.
[ 11.590395] usbcore: registered new interface driver cdc_mbim
[ 11.593236] usbcore: registered new interface driver option
[ 11.593855] usbserial: USB Serial support registered for GSM modem (1-port)
[ 11.600258] usbcore: registered new interface driver qcserial
[ 11.600866] usbserial: USB Serial support registered for Qualcomm USB modem
[ 11.615847] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 15.971092] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n ull)
[ 16.339487] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n ull)
[ 16.669949] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n ull)
[ 17.009207] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n ull)
[ 17.345388] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n ull)
[ 17.680783] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n ull)
[ 18.026258] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n ull)
[ 18.371438] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n ull)
[ 18.709838] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n ull)
[ 19.045830] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n ull)
[ 19.382520] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n ull)
[ 29.358584] rk_gmac-dwmac ff540000.ethernet eth0: PHY [stmmac-0:01] driver [R TL8211E Gigabit Ethernet] (irq=POLL)
[ 29.367545] rk_gmac-dwmac ff540000.ethernet eth0: No Safety Features support found
[ 29.368246] rk_gmac-dwmac ff540000.ethernet eth0: PTP not supported by HW
[ 29.369435] rk_gmac-dwmac ff540000.ethernet eth0: configuring for phy/rgmii l ink mode
[ 30.277467] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n ull)
Just stops here. Red stable light on SYS. No LAN led, no ip.
My hope someone with better knowledge than i can help me installing gargoyle on this device.