Installing Gargoyle on x86 hardware
Posted: Sun Dec 04, 2022 3:55 am
This are my notes on installing on a x86 PC
These note are very brief and assumes some command line experience. Some steps are missing.
Ubuntu LiveCD (boot disc)
Putty (remote install)
Boot with the LiveCD on the target machine, You will these connections. Keyboard, Mouse, Screen and Network connection.
On the target machine open a terminal run the following commands for a remote connection. If you don't want a remote connection just type the putty commands directly into the terminal. I find cutting and pasting easier.
Find your IP address on the target machine
On your client machine run putty. use the IP address found above.
Find your target drive with
Download Gargoyle x86
unzip
image copy
From the information that I can find "dd" command does not have a image resize capability so you will need to use gparted found on the liveCD to use the entire drive. From memory the command above only makes a 256MB partition.
These note are very brief and assumes some command line experience. Some steps are missing.
Ubuntu LiveCD (boot disc)
Putty (remote install)
Boot with the LiveCD on the target machine, You will these connections. Keyboard, Mouse, Screen and Network connection.
On the target machine open a terminal run the following commands for a remote connection. If you don't want a remote connection just type the putty commands directly into the terminal. I find cutting and pasting easier.
Code: Select all
sudo apt update
sudo apt install openssh-server
sudo systemctl start sshd
sudo adduser user
sudo usermod -aG sudo user
Code: Select all
ip a
Find your target drive with
Code: Select all
sudo fdisk -l
Code: Select all
wget https://www.gargoyle-router.com/downloads/images/x86/gargoyle_1.13.0-x86-64-combined-ext4.img.gz
Code: Select all
gzip -d gargoyle_1.13.0-x86-64-combined-ext4.img.gz
Code: Select all
sudo dd if=gargoyle_1.13.0-x86-64-combined-ext4.img of=/dev/sda bs=1M count=100