Version 1.13.0 : Based on OpenWrt 19.07.8

The latest news about Gargoyle

Moderator: Moderators

ViBE
Posts: 194
Joined: Sun Apr 19, 2015 6:58 pm

Re: Version 1.13.0 : Based on OpenWrt 19.07.8

Post by ViBE »

connect my external HDD back. for several reasons i have a hub. the hub has an indicator led which lights up when it's connected.

so the router boots up and somehow now the hub's led only lights up for a 5-6 seconds and than goes off. i checked the hub with other devices and it works correctly. but the router power down it after boot or just don't detect it. after boot no USB devices detected. and this also true for any directly connected USB devices.

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.13.0 : Based on OpenWrt 19.07.8

Post by Lantis »

I expect you will need to troubleshoot this locally. That router doesn’t have the usb storage plug-in installed by default so other components may be missing that are required.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

ViBE
Posts: 194
Joined: Sun Apr 19, 2015 6:58 pm

Re: Version 1.13.0 : Based on OpenWrt 19.07.8

Post by ViBE »

oh. that's because of the filesize cut thing what you mentioned before? the repos fixed as you adviced so i guess i can install any plugins. what plugins are needed?

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.13.0 : Based on OpenWrt 19.07.8

Post by Lantis »

Usb storage without sharing should be sufficient
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

pythonic
Posts: 230
Joined: Mon Mar 11, 2019 5:47 am
Location: Australia

Re: Version 1.13.0 : Based on OpenWrt 19.07.8

Post by pythonic »

pythonic wrote:
Tue Jun 21, 2022 7:10 am
ViBE wrote:
Mon Jun 20, 2022 10:24 am
if i connect it via cable to my main router it cannot get IP for some reason.
Hmmm... I don't recall whether I tested that configuration (was more interested in using my Mango with a 4G dongle).
Follow-up in the build thread.

gerardo4020
Posts: 4
Joined: Sat Mar 12, 2022 2:35 pm

Re: Version 1.13.0 : Based on OpenWrt 19.07.8

Post by gerardo4020 »

Hello guys

I have a problem with the internet network speed.

I have contracted a 200 mbps fiber optic plan, but I only get that speed for a few minutes after turning on the router.

I have connected using wired or wifi and the result is the same, it only gives the speed just a few minutes after turning on the router

I have an archer c7 v2

Any suggestion in the configuration, something to modify to improve the connection speed...?

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.13.0 : Based on OpenWrt 19.07.8

Post by Lantis »

What speed does it drop to?
I’d suggest the router isn’t fast enough to keep up. You can try disabling bandwidth monitoring (/etc/init.d/bwmon_gargoyle stop) and QoS to check.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

gerardo4020
Posts: 4
Joined: Sat Mar 12, 2022 2:35 pm

Re: Version 1.13.0 : Based on OpenWrt 19.07.8

Post by gerardo4020 »

Lantis wrote:
Mon Aug 01, 2022 7:30 pm
What speed does it drop to?
I’d suggest the router isn’t fast enough to keep up. You can try disabling bandwidth monitoring (/etc/init.d/bwmon_gargoyle stop) and QoS to check.
I stopped bwmon_gargoyle

now it reaches a speed of 52 mbps,

Qos is disabled on the interface

I improve a little...

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Version 1.13.0 : Based on OpenWrt 19.07.8

Post by ispyisail »

Router reset (factory reset) to find your base speed

gerardo4020
Posts: 4
Joined: Sat Mar 12, 2022 2:35 pm

Re: Version 1.13.0 : Based on OpenWrt 19.07.8

Post by gerardo4020 »

ispyisail wrote:
Mon Aug 01, 2022 10:43 pm
Router reset (factory reset) to find your base speed
I have performed a factory reset and the problem has been solved. :mrgreen:

Receiving full speed :oops:

Additionally, I will do a hard reset 30/30/30 to put it back in operation.

thanks for the support and advice

Post Reply