QOS
Posted: Sat May 07, 2011 5:41 am
QOS only works for 8 or fewer service classes. 9 or more service classes does not work correctly.
(Alix/x86 - ver. 1.3.13)
(Alix/x86 - ver. 1.3.13)
Gargoyle Forum
A forum to discuss the Gargoyle web interface for Openwrt
https://www.gargoyle-router.com/phpbb/
QOS
Page 1 of 1
Re: QOS
Posted: Sat May 07, 2011 8:58 am
Please post the rules you are using and your connection list while the miss-operation is underway.
Re: QOS
Posted: Sat May 07, 2011 1:55 pm
lan ip = 10.0.0.1
password = password
Old version 1.3.3 to 1.3.9 show the Bandwidth Usage Data OK. The latest version 1.3.13 do not show anything. All new firmware QoS (Download) - Service Classes .... in the attached file (scan01 and scan02) show wrong information. Downloading pc is 10.0.0.2
password = password
Old version 1.3.3 to 1.3.9 show the Bandwidth Usage Data OK. The latest version 1.3.13 do not show anything. All new firmware QoS (Download) - Service Classes .... in the attached file (scan01 and scan02) show wrong information. Downloading pc is 10.0.0.2
Re: QOS
Posted: Sat May 07, 2011 7:34 pm
I have investigated this issue and it seems you are correct that some situationss can cause the QoS bandwidth display to not work properly.
I can report however that your QoS is working properly even if the bandwidth display is messed up. You can verify this yourself by looking at the status->connections page.
Anyway thanks for your report. I will work in this this weekend so check back Sunday evening for an update.
I can report however that your QoS is working properly even if the bandwidth display is messed up. You can verify this yourself by looking at the status->connections page.
Anyway thanks for your report. I will work in this this weekend so check back Sunday evening for an update.
Re: QOS
Posted: Sun May 08, 2011 8:45 am
Please uncompress the attached qos.js and use it to replace the file of the same name in /www/js. This should resolve this issue.
Please check both upload and download pages and post your results.
Please check both upload and download pages and post your results.
Re: QOS
Posted: Sun May 08, 2011 1:19 pm
Computer IP 10.0.0.14 - service classes is OK !!! 
The problem is that the status -> Bandwidth usage -> QOS Download / Upload class - no graph in the firmware 1.3.13. The older firmware 1.3.3-1.3.9 is OK. See next post.
The problem is that the status -> Bandwidth usage -> QOS Download / Upload class - no graph in the firmware 1.3.13. The older firmware 1.3.3-1.3.9 is OK. See next post.
Re: QOS
Posted: Sun May 08, 2011 1:20 pm
Status -> Bandwidth usage -> QOS Download / Upload class - no graph in the firmware 1.3.13
Re: QOS
Posted: Sun May 08, 2011 2:47 pm
correct display of the chart in the firmware 1.3.10
Re: QOS
Posted: Thu May 12, 2011 6:53 pm
The firmware version 1.3.13, 1.3.14 does not display the upload speed. In Version 1.3.10 is OK.