Page 2 of 5
Re: 1.13.0.x gargoyle-ispy 2020-December-14 23
Posted: Tue Dec 22, 2020 3:40 am
by Lantis
The biggest question is why you've got QoS restarting so often. Was this you due to you testing and saving often?
Imq failing to init isn't common, but if you've got things rapidly restarting, it can get hung up on contested parts of the system. That's why I added the retry code. It doesn't try more than 3 times otherwise it considers it a complete fail and turns off.
If it fails, QoS won't work properly at all. No surprises there.
Re: 1.13.0.x gargoyle-ispy 2020-December-14 23
Posted: Tue Dec 22, 2020 10:00 am
by CBx86
Hey guys!
I m having some issue.
Code: Select all
Gargoyle Version:1.13.X (Built 20201214-2347 git@c066e2fb)
Model:TP-Link TL-WDR4300 v1
Fresh install, no preserve settings.
opkg.conf:
Code: Select all
#src/gz openwrt_19.07-SNAPSHOT_base http://downloads.openwrt.org/releases/19.07-SNAPSHOT/packages/mips_24kc/base
#src/gz openwrt_19.07-SNAPSHOT_packages http://downloads.openwrt.org/releases/19.07-SNAPSHOT/packages/mips_24kc/packages
#src/gz openwrt_19.07-SNAPSHOT_routing http://downloads.openwrt.org/releases/19.07-SNAPSHOT/packages/mips_24kc/routing
#src/gz openwrt_19.07-SNAPSHOT_telephony http://downloads.openwrt.org/releases/19.07-SNAPSHOT/packages/mips_24kc/telephony
src/gz gargoyle http://www.gargoyle-router.com/packages/gargoyle-1.14/ath79/default
src/gz gargoyle_kernel_specific http://www.gargoyle-router.com/packages/gargoyle-1.14/ath79/default_kernelspecific
dest root /
dest ram /tmp
dest plugin_root /plugin_root
lists_dir ext /var/opkg-lists
option overlay_root /overlay
src/gz romanhk http://gargoyle.romanhk.cz/1.13.x/1.13.0.x%20gargoyle-ispy%202020-December-14%2023/built/ath79/default
src/gz romanhk_kernel_specific http://gargoyle.romanhk.cz/1.13.x/1.13.0.x%20gargoyle-ispy%202020-December-14%2023/built/ath79/default_kernelspecific
Code: Select all
Filesystem Size Used Available Use% Mounted on
/dev/root 5.3M 5.3M 0 100% /rom
tmpfs 60.7M 140.0K 60.5M 0% /tmp
/dev/mtdblock4 1.0M 268.0K 756.0K 26% /overlay
overlayfs:/overlay 1.0M 268.0K 756.0K 26% /
tmpfs 512.0K 0 512.0K 0% /dev
/dev/sda1 14.6G 40.0M 13.8G 0% /tmp/usb_mount/c330f42d-1965418-8478746-98fd-22c8d9fda1d61c1
Code: Select all
root@Gargoyle:/# gpkg install plugin-gargoyle-usb-storage-full
ERROR: Not enough space in destination root to install specified packages:
kmod-fs-nfs, kmod-crypto-null, nfs-utils, libtirpc, kmod-fs-nfs-common, share-users, kmod-crypto-pcompress, nfs-utils-libs, libkeyutils, libwrap, rpcbind, kmod-fs-nfs-v4, vsftpd, kmod-crypto-cbc, kmod-crypto-cts, kmod-crypto-des, kmod-crypto-ecb, kmod-crypto-md5, kmod-fs-nfsd, plugin-gargoyle-usb-storage-full, kmod-crypto-aead, kmod-dm, libdevmapper, kmod-fs-nfs-common-rpcsec, samba36-server, kmod-crypto-manager, kmod-dax, nfs-kernel-server, kmod-crypto-sha1, kmod-fs-exportfs, kmod-crypto-hmac, kmod-dnsresolver, nfs-kernel-server-utils
I have the same issue in predecessor version.
One other thing. I set to use /plugin_root to USB, so, i needed restart the system, to recognize external root.
Any hint?
Many thanks!
Re: 1.13.0.x gargoyle-ispy 2020-December-14 23
Posted: Tue Dec 22, 2020 11:54 am
by RomanHK
Make sure (using the command) if the root plugin really leads to USB:
It should write the path where the symbolic link leads. If it doesn't write anything, then you don't have the root plugin pointed to USB.
P.S. Otherwise, I don't have the opportunity to try it, because my routers already have a USB plugin pre-installed.
Re: 1.13.0.x gargoyle-ispy 2020-December-14 23
Posted: Tue Dec 22, 2020 12:08 pm
by CBx86
Code: Select all
root@Gargoyle:~# ls -la /plugin_root | grep "\->"
lrwxrwxrwx 1 root root 64 Dec 22 10:39 /plugin_root -> /tmp/usb_mount/c330f42d-1965418-8478746-98fd-22c8d9fda1d61c1//plugin_root
Humm.
Code: Select all
root@Gargoyle:~# ls -la /tmp/usb_mount/c330f42d-1965418-8478746-98fd-22c8d9fda1d61c1/plugin_root/
drwxr-xr-x 2 root root 4096 Dec 22 10:39 .
drwxrwxrwx 4 root root 4096 Dec 22 10:39 ..
lrwxrwxrwx 1 root root 4 Dec 22 10:39 etc -> /etc
lrwxrwxrwx 1 root root 4 Dec 22 10:39 tmp -> /tmp
lrwxrwxrwx 1 root root 4 Dec 22 10:39 var -> /var
WTF?
Code: Select all
/dev/sda1 2048 31293406 31291359 14.9G VMware Virsto
Re: 1.13.0.x gargoyle-ispy 2020-December-14 23
Posted: Tue Dec 22, 2020 12:34 pm
by RomanHK
CBx86 wrote:
WTF?
Code: Select all
/dev/sda1 2048 31293406 31291359 14.9G VMware Virsto
I assume it's a volume label (VMware Virsto).
Re: 1.13.0.x gargoyle-ispy 2020-December-14 23
Posted: Tue Dec 22, 2020 12:39 pm
by CBx86
RomanHK wrote: ↑Tue Dec 22, 2020 12:34 pm
CBx86 wrote:
WTF?
Code: Select all
/dev/sda1 2048 31293406 31291359 14.9G VMware Virsto
I assume it's a volume label (VMware Virsto).
Its the partition type, I changed this, all is the same.
Now gargoyle's default type is 'VMware Virsto'. I think.
I have some time from holidays, i go deep on this.
Edit. Now i remember. Forget about this VMware Virsto, i changed the disk.
Problem persist.
Re: 1.13.0.x gargoyle-ispy 2020-December-14 23
Posted: Tue Dec 22, 2020 8:16 pm
by RomanHK
plugin_root and extroot are two different things. plugin_root will only use USB as additional storage for packages - but extroot will make USB as if it were FLASH memory and will become fully part of Gargoyle.
But I don't think you will get to extroot - maybe first try to install the plugin without sharing (then maybe you could get to extroot):
Code: Select all
gpkg install plugin-gargoyle-usb-storage-noshare
Before you do an extroot, read the instructions on what it is and what will happen to USB!
Re: 1.13.0.x gargoyle-ispy 2020-December-14 23
Posted: Wed Dec 23, 2020 7:59 pm
by CBx86
Hey!
I didn't do make extroot on this unit, fresh install. I did´t make nothing on it.
Where i write external root, it´s plugin_root
My Mistake.
Where files are downloaded before the install process? (Using gpkg/opkg)?
Thanks!
Re: 1.13.0.x gargoyle-ispy 2020-December-14 23
Posted: Wed Dec 23, 2020 10:02 pm
by BJReplay
Lantis wrote: ↑Tue Dec 22, 2020 3:40 am
The biggest question is why you've got QoS restarting so often. Was this you due to you testing and saving often?
Imq failing to init isn't common, but if you've got things rapidly restarting, it can get hung up on contested parts of the system. That's why I added the retry code. It doesn't try more than 3 times otherwise it considers it a complete fail and turns off.
If it fails, QoS won't work properly at all. No surprises there.
Thanks, that makes sense.
Yes was saving often as I tested different settings.
Re: 1.13.0.x gargoyle-ispy 2020-December-14 23
Posted: Thu Dec 24, 2020 4:51 am
by phgerin
Hello,
I still have problems with bandwidth distribution graph, but only when displaying hostnames.
Safari/chrome/firefox/...
