Gargoyle Forum

Hello,
Please I bought MT300N-V2 router thinking I would be
able to flash Gargoyle on it. I contacted the manufacturer
for help. And I was directed to flash this
gargoyle_1.11.0-ramips-mt7620-gl-mt300n-squashfs-sysupgrade.bin

After flashing the above firmware the router didn't reboot automatically,
so I believed the firmware didn't work.

Please, is there any other firmware I can flash on this router.

Thanks.

They gave you bad advice. The V1 and V2 are different with different processors and other hardware.

We don't build images for the V2, only V1.
It would probably be possible for you to custom build one for your router.

Lantis wrote:They gave you bad advice. The V1 and V2 are different with different processors and other hardware.

We don't build images for the V2, only V1.
It would probably be possible for you to custom build one for your router.

Thank you for your reply Mr Lantis.
Please sir, can you kindly give me a clue or advice of how to go
about the customisation to build an image for Glinet MT300N-V2.

Thanks.

ispyisail wrote:viewtopic.php?f=14&t=11883

Woah!
Thank you so much Mr ispyisail for the excellent work.
But can you give me the "unique" procedure to follow in my own case concerning Glinet MT300N-V2.
I am so grateful.

Thanks

oyeyemi wrote:Hello,
Please I bought MT300N-V2 router thinking I would be
able to flash Gargoyle on it. I contacted the manufacturer
for help. And I was directed to flash this
gargoyle_1.11.0-ramips-mt7620-gl-mt300n-squashfs-sysupgrade.bin

After flashing the above firmware the router didn't reboot automatically,
so I believed the firmware didn't work.

Please, is there any other firmware I can flash on this router.

Thanks.

Gargoyle PL by obsy has a Gargoyle firmware for the MT300N-V2. Works fine on mine.

You can download from here:
https://dl.eko.one.pl/gargoyle-pl/openw ... ps/mt76x8/