Lantis wrote:"gpkg list-installed | grep ath9k"
you can try running "wifi config" to generate the config file. Doesn't make much sense why it doesn't exist already. I'll flash a WNDR3800 this week to see whether it behaves similarly.
From openwrt dmesg:
PPTP driver version 0.8.5
[ 24.766093] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 25.599672] owl-loader 0000:00:11.0: fixup device configuration
[ 25.607520] pci 0000:00:11.0: [168c:0029] type 00 class 0x028000
[ 25.607555] pci 0000:00:11.0: reg 0x10: [mem 0x10000000-0x1000ffff]
[ 25.607612] pci 0000:00:11.0: PME# supported from D0 D3hot
[ 25.608208] pci 0000:00:11.0: BAR 0: assigned [mem 0x10000000-0x1000ffff]
[ 25.615169] ath9k 0000:00:11.0: enabling device (0000 -> 0002)
[ 25.654569] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
[ 25.663196] ath: EEPROM regdomain: 0x0
[ 25.663200] ath: EEPROM indicates default country code should be used
[ 25.663203] ath: doing EEPROM country->regdmn map search
[ 25.663214] ath: country maps to regdmn code: 0x3a
[ 25.663219] ath: Country alpha2 being used: US
[ 25.663222] ath: Regpair used: 0x3a
[ 25.677795] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 25.679524] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=18
[ 25.855314] owl-loader 0000:00:12.0: fixup device configuration
[ 25.863264] pci 0000:00:12.0: [168c:0029] type 00 class 0x028000
[ 25.863300] pci 0000:00:12.0: reg 0x10: [mem 0xffff0000-0xffffffff]
[ 25.863357] pci 0000:00:12.0: PME# supported from D0 D3hot
[ 25.863924] pci 0000:00:12.0: BAR 0: assigned [mem 0x10010000-0x1001ffff]
[ 25.870885] ath9k 0000:00:12.0: enabling device (0000 -> 0002)
[ 25.923564] ath: phy1: Ignoring endianness difference in EEPROM magic bytes.
[ 25.932175] ath: EEPROM regdomain: 0x0
[ 25.932180] ath: EEPROM indicates default country code should be used
[ 25.932183] ath: doing EEPROM country->regdmn map search
[ 25.932193] ath: country maps to regdmn code: 0x3a
[ 25.932198] ath: Country alpha2 being used: US
[ 25.932201] ath: Regpair used: 0x3a
[ 25.948983] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
etc....
This is missing part in dmesg log from my gargoyle 1.13, so I thinking owl-loader module is missing, but why ?