Re: Openwrt 19.07 based Gargoyle
Posted: Sun Jan 12, 2020 5:02 am
Then have you tried saving connection settings to try?
A forum to discuss the Gargoyle web interface for Openwrt
https://www.gargoyle-router.com/phpbb/
If you about bandwidth monitors - yes. Not help.Lantis wrote:Then have you tried saving connection settings to try?
Saving connection information exactly fixing web usage, when using modem connection.Lantis wrote:A full boot log when the problem occurs should be fine, or if it occurs after saving the connection settings a logread there is ok.
This is not normal behaviour, and even a late firewall should not really trigger it, as the scripts are triggered by the firewall itself.
This issue not working even on regular WAN connection. I noted this pretty long time ago and was sure I wrote this question.Lantis wrote:I'm more interested in the bandwidth issue which you said was not fixed.
Build went fine after that. Thank you. Will note for future builds.Lantis wrote:In your Gargoyle git folder, run the followingCode: Select all
git fetch --all git pull
Please skip looking on this. I'm really sorry. It was probably my builds fault. After thisLantis wrote:I'm more interested in the bandwidth issue which you said was not fixed.
Code: Select all
git fetch --all
git pull
plugin-gargoyle-usb-storage-noshare requires USB2 module (DEPENDS+=+kmod-usb2); however some devices with USB3 will not have usb2 kernel module. I don't know how, but only one of the modules: kmod-usb2, kmod-usb3 should satisfy dependances.Lantis wrote:That doesn't sound right.
I think what they are trying to say is that usb3 is enabled by default. However. In our config we quite clearly have it disabled.
So yes while setting it to "=y" is not strictly required, setting it to "is not set" overrides the default and turns it off.
And no, there is still a kmod-usb3 and there's no indication I can see that this functionality has been merged elsewhere (why would they?)
Please seek some clarification.