LinksysWRT3200ACM
Posted: Mon Mar 11, 2019 10:43 pm
Ok, I have the WRT3200ACM, and I have the files:
gargoyle_1.11.0-mvebu-cortexa9-linksys-wrt3200acm-squashfs-factory.img
gargoyle_1.11.0-mvebu-cortexa9-linksys-wrt3200acm-squashfs-sysupgrade.bin
I have logged into the router and opened the connectivity page and the "basic" tab.
To the right there is a section labeled "router firmware update" with two boxes, the lower of which is "manual" with a "select file" button.
Is Step 1 is to select the "...factory.img" file and then push the "start" button?
The different file extensions between the factory and sysupgrade files got my attention, so I want to double check...
gargoyle_1.11.0-mvebu-cortexa9-linksys-wrt3200acm-squashfs-factory.img
gargoyle_1.11.0-mvebu-cortexa9-linksys-wrt3200acm-squashfs-sysupgrade.bin
I have logged into the router and opened the connectivity page and the "basic" tab.
To the right there is a section labeled "router firmware update" with two boxes, the lower of which is "manual" with a "select file" button.
Is Step 1 is to select the "...factory.img" file and then push the "start" button?
The different file extensions between the factory and sysupgrade files got my attention, so I want to double check...