Page 1 of 1

Firmware Archer C20 V4

Posted: Sun Nov 25, 2018 5:03 am
by melquiferreira
Please, can someone find this firmware (or latest) version and send me?

Archer C20 V4
Version 3.16.0 0.9.1 v600f.0 Build 180124 Rel.32961n

https://drive.google.com/file/d/1S3UXEj ... sp=sharing

Re: Firmware Archer C20 V4

Posted: Sun Nov 25, 2018 6:24 am
by Lantis

Re: Firmware Archer C20 V4

Posted: Sun Nov 25, 2018 6:30 am
by melquiferreira
Already tried! Don't found this version in none of country sites of TP-Link.

Re: Firmware Archer C20 V4

Posted: Sun Nov 25, 2018 6:55 am
by Lantis
Here is the Australian one.
https://www.tp-link.com/au/download/Archer-C20.html

Please contact TP Link for further assistance.

Re: Firmware Archer C20 V4

Posted: Sun Dec 30, 2018 8:12 am
by melquiferreira
For someone who need it:

http://www.excellinformatica.com.py/?in ... CHER%20C20

or

https://drive.google.com/drive/u/0/fold ... Vp0VTllems

Thi page has the updated firmware for Archer C20W (is the same V4, for providers)

Strip, and install via TFTP:

Additional note.
U-boot has hardcoded tftp update command:

tftp 0x80060000 tp_recovery.bin;erase tplink 0x20000 0x7a0000;cp.b 0x80080000 0x20000 0x7a0000

You can see that the uboot code is not flashed or erased. So the device can't be fully bricked when updating via tftp mode. Uboot will be alive.

How to restore stock firmware via tftp

Download stock firmware from tplink website for your device and unpack it. For a example next link Archer C20(EU)_V4_170822.zip 139
Perform command: dd if=archer_stock.bin of=tp_recovery.bin bs=512 skip=1 to create firmware for tftp
Use tftp mode to flash tp_recovery.bin.

Re: Firmware Archer C20 V4

Posted: Fri Feb 15, 2019 5:30 pm
by diegofernando
I installed the preset on router c20 w, after that I installed openwrt because of not being able to reinstall the original firmware on the router or send other firmware. I tried doing the restoration with ftp32 via windows and without success, the brick router

Is there any way to do it?

Re: Firmware Archer C20 V4

Posted: Sat Mar 09, 2019 11:14 am
by melquiferreira
diegofernando wrote:I installed the preset on router c20 w, after that I installed openwrt because of not being able to reinstall the original firmware on the router or send other firmware. I tried doing the restoration with ftp32 via windows and without success, the brick router

Is there any way to do it?

https://openwrt.org/toh/tp-link/tp-link ... ftp_method

Use this tp_recovery.bin (Archer C20(BR)_V4_190103, already stripped):

https://drive.google.com/open?id=1cPEce ... c4FXjwBMH4