Page 1 of 1
Gargoyle with 4G EE LTE wireless broadband
Posted: Sat Sep 22, 2018 8:22 am
by joelm335
Gargoyle has been working flawlessly for 18 months on a Satellite broadband system in a rental property. We want to upgrade to LTE broadband (4G wirelessj through a new EE mast. I tried plugging the ethernet cable from the Gargoyle router into the LAN port on the 4G EE router but get no internet connection via the Gargoyle router. EE are unhelpful. Do I need to reconfigure either the EE or Gargoyle routers?
EE Alcatel
WNDR 3700 Gargoyle 1.8
Re: Gargoyle with 4G EE LTE wireless broadband
Posted: Sat Sep 22, 2018 3:21 pm
by ispyisail
Should work with no problems
We need to see some screen shots
Sometimes the upstream device (usually ISP owned equipment) is looking for the correct MAC address?
But we really need to see some screen shots to see whats going on
Re: Gargoyle with 4G EE LTE wireless broadband
Posted: Sun Sep 23, 2018 4:06 am
by joelm335
Screenshots of Gargoyle router or LTE? Which screens? I am not getting any error messages on Gargoyle. Just no internet.
Will have to till mid week as we have guests in the Lodge
Thanks
Re: Gargoyle with 4G EE LTE wireless broadband
Posted: Sun Sep 23, 2018 4:23 am
by Rog66
Was the connection on the gargoyle router to the satellite router set to dhcp? If not have you rest it to this for the EE router?
Do you see an IP address on the wan connection of the gargoyle router in the status screen?
If you plug a pc directly into the EE router do you get a connection?
Re: Gargoyle with 4G EE LTE wireless broadband
Posted: Sun Sep 23, 2018 4:36 am
by Rog66
One other thing - looks like the default ip range of the EE router is 192.168.1.1 . You’ll need to change you gargoyle router ip if this is the same currently. Try 192.168.2.1 if so.
Re: Gargoyle with 4G EE LTE wireless broadband
Posted: Mon Sep 24, 2018 6:02 am
by joelm335
Thanks for the suggestions. Gargoyle router connection is set to DHCP. EE default IP range is 192.168.1.1. Would that cause a conflict? I will change LAN range on the Gargoyle router as soon as the property is unoccupied. Will also check status screen on Gargoyle for IP address.
I didn't try connecting a PC to this LTE router, but I just installed an identical EE router at home (no quotas so no Gargoyle needed) and a PC will connect to that through the LAN port. I also I have a TP-Link "through the mains" extender connected at home and that works fine, so the LAN port(s) should be functional.
Re: Gargoyle with 4G EE LTE wireless broadband
Posted: Mon Sep 24, 2018 8:17 am
by Lantis
Yes they must be on separate subnets. I think this will fix your issue.
Re: Gargoyle with 4G EE LTE wireless broadband
Posted: Wed Sep 26, 2018 4:31 am
by joelm335
Can get access tonight.
Should I set the Router IP to 192.168.2.1 and the subnet mask to 255.255.255.0 ? Or should I pick a completely different router IP and subnet e.g. 10.0.0.1 and 255.0.0.0 ?
Re: Gargoyle with 4G EE LTE wireless broadband
Posted: Wed Sep 26, 2018 6:09 am
by Lantis
Either of those is fine. It’s personal preference.
For smaller networks I tend to stick in the 192 range.
Re: Gargoyle with 4G EE LTE wireless broadband
Posted: Wed Sep 26, 2018 1:42 pm
by joelm335
Changing it to 192.168.2.1 sorted it. Thanks everyone!