Page 1 of 1
No Block MAC Address Option in gargoyle 1.10.0
Posted: Sat Aug 11, 2018 2:27 pm
by Desert Eyes
I can’t find block mac address in static ip section of gargoyale 1.10.0 for tplink 841N. How can i update or use other option for fixing static ip to mac addresses because user change static ip and bypass Allocated qoutas
Re: No Block MAC Address Option in gargoyle 1.10.0
Posted: Sat Aug 11, 2018 4:47 pm
by ispyisail
Use fixed IP address
and/or
Turn off of reduce the IP pool

Re: No Block MAC Address Option in gargoyle 1.10.0
Posted: Sun Aug 12, 2018 6:36 pm
by Desert Eyes
When i assign static ips internet stops working over devices assigned static ips. I forcefully have to 1st assign them dhcp ips and then turn dhcp. But if i again have to add any device same procedure enabling dhcp assiging ip and turning off dhcp is to be carried out. Butt issue hard work is not but i have assigned bandwidth qouta on fixed ips but when adding new device ips shuffle and all qouta assignments are mixed up
Re: No Block MAC Address Option in gargoyle 1.10.0
Posted: Sun Aug 12, 2018 7:05 pm
by ispyisail
When i assign static ips internet stops working over devices assigned static ips.
You need to get this working
I suspect a rule you have created is doing the blocking.
I would reset the router and start again (or something to this effect)