Routing repeater behind double NAT
Posted: Fri Jul 13, 2018 7:55 pm
Fiber modem is set to 192.168.1.1
1.10 gargoyle is set to AP using ip 192.168.1.2
1.9x Repeater 192.168.2.1 connects to AP but has no internet.
Routing is default.
Can I winSCP or telnet to edit a file correcting this on the repeater?
Thanks
1.10 gargoyle is set to AP using ip 192.168.1.2
1.9x Repeater 192.168.2.1 connects to AP but has no internet.
Routing is default.
Can I winSCP or telnet to edit a file correcting this on the repeater?
Thanks