Page 1 of 3
Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45
Posted: Sat Jun 30, 2018 1:28 am
by ispyisail
USE AT YOUR OWN RISK
WARNING: DO NOT PRESERVE SETTINGS
Now includes packages
Do not install on 4MB routers
1.11.x
gargoyle-ispy 2018-June-29 22:45
https://goo.gl/9SvSU9
Routers
https://goo.gl/9JmMKs
Re: Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45
Posted: Sat Jun 30, 2018 9:31 pm
by ispyisail
I have the same problem with my C7 with this build.
Only the default programs are being installed
Something to do with the build process?
Re: Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45
Posted: Sat Jun 30, 2018 10:24 pm
by Lantis
To clarify, what make command are you running?
Re: Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45
Posted: Sun Jul 01, 2018 1:13 am
by ispyisail
Re: Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45
Posted: Sun Jul 01, 2018 1:19 am
by ispyisail
I'm also using Ubuntu 16.04
What OS do you use?
Re: Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45
Posted: Mon Jul 02, 2018 9:12 am
by Lantis
Ubuntu 18.04
There may be an issue with multi profile builds. I’ll try to investigate.
Re: Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45
Posted: Mon Jul 02, 2018 12:18 pm
by n8b
Thanks for the build!
On a tl-wdr4300 v1.6 the packages kmod-usb-net-cdc-ether and usb-modeswitch are missing so when I plug in a Huawei E3372 it is not recognized.
I only get:
Code: Select all
Fri Jun 1 21:11:18 2018 kern.info kernel: [ 481.444080] usb 1-1.2: new high-speed USB device number 3 using ehci-platform
In latest 1.1
0.X build I get this when plugging in the E3372:
Code: Select all
Sat Mar 24 16:00:24 2018 kern.info kernel: [ 613.460000] usb 1-1.2: new high-speed USB device number 5 using ehci-platform
Sat Mar 24 16:00:24 2018 kern.info kernel: [ 613.600000] usb-storage 1-1.2:1.0: USB Mass Storage device detected
Sat Mar 24 16:00:24 2018 kern.info kernel: [ 613.620000] scsi host2: usb-storage 1-1.2:1.0
Sat Mar 24 16:00:25 2018 kern.info kernel: [ 614.240000] usb 1-1.2: USB disconnect, device number 5
Sat Mar 24 16:00:25 2018 kern.info kernel: [ 614.740000] usb 1-1.2: new high-speed USB device number 6 using ehci-platform
Sat Mar 24 16:00:26 2018 kern.info kernel: [ 615.030000] cdc_ether 1-1.2:1.0 eth1: register 'cdc_ether' at usb-ehci-platform-1.2, CDC Ethernet Device, 0c:5b:8f:27:9a:64
Sat Mar 24 16:00:26 2018 kern.info kernel: [ 615.050000] usb-storage 1-1.2:1.2: USB Mass Storage device detected
Sat Mar 24 16:00:26 2018 kern.info kernel: [ 615.060000] scsi host3: usb-storage 1-1.2:1.2
Sat Mar 24 16:00:27 2018 kern.notice kernel: [ 616.060000] scsi 3:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
Sat Mar 24 16:00:27 2018 kern.notice kernel: [ 616.070000] sd 3:0:0:0: [sda] Attached SCSI removable disk
Sat Mar 24 16:00:28 2018 daemon.err block: Unkown action change
Sat Mar 24 16:00:29 2018 daemon.err block: Unkown action change
and in 'Connect Via' I can select USB Modem (HiLink, RNDIS)
Re: Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45
Posted: Sat Jul 07, 2018 7:01 am
by Lantis
I think i understand what is going wrong with the multi-profile builds. I'm testing now. I'll upload my images when it is done for people to test if they contain everything.
Re: Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45
Posted: Mon Jul 09, 2018 4:55 am
by Lantis
Please find my images here for testing:
http://lantisproject.com/gargoyle_custom/ar71xx-1.11.x/
These should now contain the correct packages (i have only tested on a WNDR3800 which is usb_large).
@ispy
https://github.com/ericpaulbishop/gargo ... eb6c109b53
I believe this is what fixed it.
However i also had to put an additional patch in the mix to stop the ar71xx builds from crashing, and i am surprised that you did not encounter it.
Re: Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45
Posted: Mon Jul 09, 2018 5:11 am
by Lantis
I want to know what routers people want to see supported in 1.11.x.
Which routers are we missing from the targets we already support that are popular and you want to see support for? This is relatively easy for me to add. If anyone sends a suggestion for a router with 4MB of flash i'll throw something at them.
ar71xx, brcm47xx, mvebu, ramips
Which targets are popular that aren't already supported and you think should be? This is harder for me to do as i can't test it. But there's some things worth doing as they are popular models.
ipq806x