Page 1 of 1

Gargoyle on Client+AP Configuration Cannot Ping Gateway but Internet OK

Posted: Sat May 19, 2018 11:24 am
by adzie
Hi Experts,

I have very strange problem on my 2nd router which is using Gargoyle. Below is my Setup

Internet --||-- 1st Router(192.168.1.1) --|Wireless|--2nd Router (192.168.1.3) this is Gargoyle router.

Internet connection were fine whenever the client were camped on both router, however if I connected on 1st router I could not Ping 2nd Router IP address (time out) and vice versa..

Below is my Gargoyle router information:
Status
Device Name:Gargoyle
Gargoyle Version:1.9.1
Model:TP-Link TL-WR841N/ND v8
Device Configuration:Gateway

any advice which configuration that I need to check on Gargoyle router?

thank you in advance for the suggestion and feedback.

Re: Gargoyle on Client+AP Configuration Cannot Ping Gateway but Internet OK

Posted: Sat May 19, 2018 2:39 pm
by ispyisail
Internet --||-- 1st Router(192.168.1.1) --|Wireless|--2nd Router (192.168.1.3) this is Gargoyle router.
They are on the same subnet?

Put them on different subnets

Re: Gargoyle on Client+AP Configuration Cannot Ping Gateway but Internet OK

Posted: Sat May 19, 2018 10:49 pm
by adzie
ispyisail wrote:
Internet --||-- 1st Router(192.168.1.1) --|Wireless|--2nd Router (192.168.1.3) this is Gargoyle router.
They are on the same subnet?

Put them on different subnets
Yes, wan ip and router IP are having same IP address which is 192.168.1.3.

Let me try to change the router IP then.. thanks a lot for the advice...