Gargoyle Forum

Hi,

I have had openvpn server up and running and working fine. We have just moved to a new house and the configuration has changed from PPoE with static ip to DHCP (wired) and I believe it is not a static ip.

I have tried different configs and even restoring defaults on the router but can't get OpenVPN to work. Any ideas? Will paying extra for a static ip help?

Will paying extra for a static ip help?

most likely not

Start by resting you router to new

failsafe reset, or re-flash your router

@ispyisail ok thanks for the reply. I'll try a reflash since the resetting didn't work

you also need to setup "Dynamic DNS" to get around floating IP address.

https://www.gargoyle-router.com/wiki/do ... s_services

ispyisail wrote:you also need to setup "Dynamic DNS" to get around floating IP address.

https://www.gargoyle-router.com/wiki/do ... s_services

I've just tried using a dynamic DNS now as well and I'm still not able to connect. I don't know if changing from ADSL 2 to the NBN and not requiring a modem any more has affected it. I'm running 1.9.2 and tried going back to 1.8.1 but I'm still not able to connect. I must be missing something and its got me stumped.

show us some screen shots

ispyisail wrote:show us some screen shots

getting this message
Sorry, the board attachment quota has been reached.

host via http://imgur.com/

I use greeenshot

ispyisail wrote:host via http://imgur.com/

I use greeenshot

Yes, I should of worked that out for myself, I was thinking it was a forum problem. This is what I have set up, if you want to see other screen let me know

http://imgur.com/a/24TPW

If it helps at all this is the error message I get on my openvpn client
08:52 read UDP [EHOSTUNREACH]: No route to host (code=113)