Gargoyle Forum

USE AT YOUR OWN RISK

WARNING: DO NOT PRESERVE SETTINGS

Do not install on 4MB routers

gargoyle-ispy 2017-January-27 10:21.torrent
https://goo.gl/akPWHg

magnet:?xt=urn:btih:c3af5a5696fbb16797a3b9ec476a562e852fdff4&dn=gargoyle-ispy%202017-January-27%2010_21.7z&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a80&tr=udp%3a%2f%2fopen.demonii.com%3a1337&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969&tr=udp%3a%2f%2ftracker.leechers-paradise.org%3a6969


Routers
https://goo.gl/oyzTp2

Changes
https://github.com/ericpaulbishop/gargo ... its/master

For the last 3 builds, the QOS distribution graph is not displayed after the upgrade (have to reset the graph).

How do you do that? I noticed that too, but it showed up automatically some time later, though come to think of it, I may have had to reboot.

Regarding the upgrade, is the "Upgrading, please wait" (or whatever the phrase is) ever actually supposed to change? I've let it go quite a long time, upwards of 10 minutes, and it didn't. Meanwhile, the router had been back up and running for a long time, as I could see by having Internet back and simply opening another tab. I understand that you wouldn't want the page refreshing prematurely, but there must be a way for it to detect the situation a little better, or at all.

Does anyone think it would be a good idea to have the kernel version and OpenWRT build in Status/Device?

phgerin wrote:For the last 3 builds, the QOS distribution graph is not displayed after the upgrade (have to reset the graph).

Just needs the firewall restarted. It's a bit hit and miss.
Rebooting router fixes.
No idea of cause because it's intermittent. I haven't seen it in these 3 updates but I've seen it previously.

rseiler wrote:How do you do that? I noticed that too, but it showed up automatically some time later, though come to think of it, I may have had to reboot.

Regarding the upgrade, is the "Upgrading, please wait" (or whatever the phrase is) ever actually supposed to change? I've let it go quite a long time, upwards of 10 minutes, and it didn't. Meanwhile, the router had been back up and running for a long time, as I could see by having Internet back and simply opening another tab. I understand that you wouldn't want the page refreshing prematurely, but there must be a way for it to detect the situation a little better, or at all.

Does anyone think it would be a good idea to have the kernel version and OpenWRT build in Status/Device?

It auto checks either 2 or 5 minutes after upgrade. Or at least it should

Is there a way to download the new firmware without using a torrent? It seems to be blocked by the ISP here (4G wireless connection). Preferably a single file for the Archer C7 only.
If not, I'll have to postpone updating and testing to next weekend

I try to mirror the files as soon as possible.
http://lantisproject.com/gargoyle_ispyisail/

Preferably people still use the torrent for fairness, but if you can't, it's there

Thank You Very Much!

I've got the torrent running, but at my other place. I've been uploading 8 to ten times times the download size for most of the last year's builds, too, but this time around timing was simply inconvenient.

Regards
Ektus.

Installed it over Gargoyle-Ispy January 19th, 2017 with preserving settings on my Archer C7 V2. Looks good so far, it's still working

One thing: In Firewall settings, I've got a restriction for one of my network cameras. It shouldn't phone home, so I've set a rule to block outgoing UDP connections from its IP. The rule is active and seems to be working, but if I edit the rule, the dialogue doesn't show the current settings but the defaults.


Regards
Ektus.

Does Web Usage Monitor get enabled for anyone upon upgrade if it was previously disabled?