Gargoyle Forum

Hi,

I setup monthly bandwidth quotas for 2 network ranges (x.x.x.51-60, and 61-70) this month. I initially saw that one of the ranges had used 1.7% of their monthly quota a day or so after putting the quota in place. After about a week, the percentage is now at 0.5% used.

I then looked at the devices for that quota on the bandwidth distribution table and added up their total usage which would be roughly 10% of it's quota.

Any idea why the numbers seem incorrect? The the other quota (51-60) seems about right at 27% used for the month.

Here's the data copied from the web ui:

Quota:
192.168.1.61-192.168.1.70 Always 384GB/NA/NA

Quota usage:
Host(s) Active Total Down Up
192.168.1.51-192.168.1.60 Always 27.183% N/A N/A
192.168.1.61-192.168.1.70 Always 0.526% N/A N/A

Bandwidth distribution:
192.168.1.67 55.046 MB 48.049 MB 6.997 MB 0% 0% 0.1%
192.168.1.66 1.518 GB 1.469 GB 49.948 MB 0.9% 0.9% 0.7%
192.168.1.65 235.433 MB 203.200 MB 32.233 MB 0.1% 0.1% 0.4%
192.168.1.64 29.280 MB 9.435 MB 19.845 MB 0% 0% 0.2%
192.168.1.63 14.513 GB 14.116 GB 406.025 MB 9% 9.1% 6%
192.168.1.62 14.918 GB 14.584 GB 342.417 MB 9.2% 9.4% 5%
192.168.1.61 4.089 MB 3.401 MB 704.717 kB 0% 0% 0%

Please post a screen shot of your quota settings, including the edit window for the quota so we can see the details.

Please host these images externally.

Thanks, it was my error. I thought they were both set the same but the problem one reset daily instead of monthly.

I assumed so
Glad it's sorted