Page 9 of 17
Re: Router Firmware Requests
Posted: Thu Apr 07, 2016 1:10 am
by Lantis
I've sent out 3 copies of the WR1043BD V3 firmware to be tested.
Re: Router Firmware Requests
Posted: Thu Apr 07, 2016 7:07 am
by NineIguanas
Lantis wrote:Notes from Lantis: Accepted
I've sent out 3 copies of the WR1043BD V3 firmware to be tested.
Awesome, thank you
Re: Router Firmware Requests
Posted: Thu Apr 07, 2016 8:13 am
by meazz1
Lantis wrote:I've sent out 3 copies of the WR1043BD V3 firmware to be tested.
Thanks, been waiting for this!
Re: Router Firmware Requests
Posted: Thu Apr 07, 2016 8:16 am
by Lantis
NineIguanas wrote:Lantis wrote:Notes from Lantis: Accepted
I've sent out 3 copies of the WR1043BD V3 firmware to be tested.
Awesome, thank you
One of them went to you. Check your inbox
Please let me know how it goes. One user reported an IMQ error which was interesting but I'm looking for other people having the same problem.
Re: Router Firmware Requests
Posted: Thu Apr 07, 2016 11:43 am
by meazz1
NineIguanas wrote:TP Link TL WR1043 v3.0
+1 for above request! Would be much appreciated. This chassis is a great work horse with a good radio section - I install a few every week!
Apparently it's the same hardware as v2, just needs the "h/w identifier" code changed.
Router Model: TP Link TL WR1043 v3.0
Link to Openwrt wiki:
https://wiki.openwrt.org/toh/hwdata/tp- ... r1043nd_v3
Is it supported in Openwrt? Yes
Does it have >= 4MB of flash? Yes
Does it have >= 8MB of flash? Yes
Does it have USB support? Yes
It's been few hours but everything seems stable and running. Setup plugins, adblock and also running as access point, no issue whatsoever.
Notes from Lantis:
Accepted
Re: Router Firmware Requests
Posted: Thu Apr 07, 2016 11:17 pm
by NineIguanas
Re TPLink WR1043NDv3, test firmware provided: loaded fine & appears to be working normally so far.
Not using any add-ons or plugins.
I find I have to shorten the gargoyle file name for the factory firmware to accept the "upgrade" - but have been doing this for ages (it's not a new issue).
Re: Router Firmware Requests
Posted: Wed Apr 13, 2016 9:33 pm
by BrotoZeno
lantis, pls let me try gargoyle in my router
Router Model: TP link wr841nd v10
Link to Openwrt wiki:
https://wiki.openwrt.org/toh/tp-link/tl-wr841nd
Link to openWRT file:
https://downloads.openwrt.org/chaos_cal ... actory.bin
Is it supported in Openwrt? Yes
Does it have > 4MB of flash? Yes
Does it have > 8MB of flash? No
Does it have USB support? No
thanks
sorry for being my first post here
Notes from Lantis:
Rejected - 4MB of flash
Re: Router Firmware Requests
Posted: Fri Apr 15, 2016 12:20 pm
by dandersen
Router Model: Netgear R7000
Link to Openwrt wiki:
https://wiki.openwrt.org/toh/netgear/r7000
Is it supported in Openwrt? Yes
Does it have > 4MB of flash? Yes
Does it have > 8MB of flash? Yes
Does it have USB support? Yes
Would love this, even if no Wi-Fi support.
Notes from Lantis:
Accepted
Re: Router Firmware Requests
Posted: Sun Apr 17, 2016 8:39 am
by Lantis
dandersen wrote:Router Model: Netgear R7000
Link to Openwrt wiki:
https://wiki.openwrt.org/toh/netgear/r7000
Is it supported in Openwrt? Yes
Does it have > 4MB of flash? Yes
Does it have > 8MB of flash? Yes
Does it have USB support? Yes
Would love this, even if no Wi-Fi support.
Notes from Lantis:
Accepted
dandersen has reported this image as working.
However, due to the lack of wifi support in this router, the Connection -> Basic page does not behave well (as expected).
It is still fully configurable using the CLI.
The WAN interface would also not come online. Your mileage may vary!
Netgear R7000 - NO WIFI SUPPORT
Re: Router Firmware Requests
Posted: Fri Apr 22, 2016 6:46 pm
by Lantis
rt_rex wrote:Hi guys, is it possible to support this router too?
Thank you.
Router Model: Meraki MR12
Link to Openwrt wiki:
https://wiki.openwrt.org/toh/meraki/mr12
Is it supported in Openwrt? Yes , since r45726 (CC trunk)
Does it have >= 4MB of flash? Yes 16MB
Does it have >= 8MB of flash? Yes 16MB
Does it have USB support? No
Notes from Lantis:
Accepted
rt_rex has reported this image as working.
As in openwrt, one of the LAN ports doesn't function. This is supposedly a driver issue.
Download:
http://lantisproject.com/gargoyle_custom/Meraki-MR12/