Page 5 of 6
Re: Converting from previous pre-installed gargoyle
Posted: Sat Apr 27, 2019 5:37 pm
by James.bailey
I should add that my Mac is still manually connected with IP address 192.168.1.101
Re: Converting from previous pre-installed gargoyle
Posted: Sat Apr 27, 2019 5:38 pm
by ispyisail
and wouldn't it be enough to hold a 10s reset button?
Have you tested? and does it work?
It would be a real good feature if it works
Re: Converting from previous pre-installed gargoyle
Posted: Sat Apr 27, 2019 5:40 pm
by ispyisail
I will try to attach a screen shot, but the ones I have tried so far were rejected as too big.
you need to remote host e.g. imgur
greenshot has this feature built in
Re: Converting from previous pre-installed gargoyle
Posted: Sat Apr 27, 2019 5:42 pm
by RomanHK
James.bailey wrote:Wow. I’m in using 192.168.1.1. It took the password I set.
I will try to attach a screen shot, but the ones I have tried so far were rejected as too big.
Save screenshots to imbur and paste link:
Code: Select all
[img]https://i.imgur.com/8uHLa4g.png[/img]
Re: Converting from previous pre-installed gargoyle
Posted: Sat Apr 27, 2019 5:44 pm
by James.bailey
I guess new software would help but I cannot connect to the internet so I cannot go get any...
Re: Converting from previous pre-installed gargoyle
Posted: Sat Apr 27, 2019 5:53 pm
by RomanHK
Wow. I’m in using 192.168.1.1. It took the password I set.
Great.
James.bailey wrote:I guess new software would help but I cannot connect to the internet so I cannot go get any...
So differently. Did you get here?
Re: Converting from previous pre-installed gargoyle
Posted: Sat Apr 27, 2019 5:58 pm
by James.bailey
Yes. I am now in the status page. It took my password.
Re: Converting from previous pre-installed gargoyle
Posted: Sat Apr 27, 2019 6:02 pm
by RomanHK
James.bailey wrote:Yes. I am now in the status page. It took my password.
Great.
The password will be your designated or default. The default password is: password
Re: Converting from previous pre-installed gargoyle
Posted: Sat Apr 27, 2019 6:25 pm
by James.bailey
To review my current status:
My Mac network connection is manually connected as 192.168.1.101.
The router is 192.168.1.1
The status is connected with Ethernet currently active.
The Mac is connected by Ethernet to the Lan socket on the router. The satellite modem is connected to the router via the Wan socket.
The gargoyle status page is showing:
Version: 1.10.0
Wan IP address 67.54.228.71
Wan gateway up: 68.54.228.1
Wan dns server: 99.196.90.99
Wireless mode: access point
Re: Converting from previous pre-installed gargoyle
Posted: Sat Apr 27, 2019 6:32 pm
by RomanHK
wow ... we're at the finish.
Get here and set up a DHCP server by screenshot:
