Page 21 of 28
Re: Gargoyle 1.15.x BETA - 2024-11-13 - Based on OpenWrt 23.05
Posted: Thu Dec 12, 2024 2:04 am
by coits
Lantis wrote: ↑Wed Dec 11, 2024 7:10 am
Per the release notes, yes.
mvebu devices are back! These were previously disabled due to an upstream issue which has now been resolved
Hi Lantis,
I am checking on this forum, is the wifi 2.4GHz issue has been fixed.
Please advise what should, I will be aware before I will upgrade from 1.13 to 1.15. Just want to make sure that 2.4 and 5 Ghz wifi, QoS and firewall works.
Thank you in advance.
Re: Gargoyle 1.15.x BETA - 2024-11-13 - Based on OpenWrt 23.05
Posted: Thu Dec 12, 2024 5:53 am
by Lantis
Please refresh my memory as to what issue with wifi you're talking about?
As far as I know, it's all good.
Re: Gargoyle 1.15.x BETA - 2024-11-13 - Based on OpenWrt 23.05
Posted: Fri Dec 13, 2024 7:09 am
by coits
Lantis wrote: ↑Thu Dec 12, 2024 5:53 am
Please refresh my memory as to what issue with wifi you're talking about?
As far as I know, it's all good.
Hi Lantis,
Thanks for the clarification. one more thing to ask, are we using nftables or ip tables on this OpenWrt 23.05 base build?
Thank you
Re: Gargoyle 1.15.x BETA - 2024-11-13 - Based on OpenWrt 23.05
Posted: Fri Dec 13, 2024 7:36 am
by Lantis
iptables
I am slowly looking at a transition to nftables for 24.10 but there’s a lot of work ahead for that.
Re: Gargoyle 1.15.x BETA - 2024-11-13 - Based on OpenWrt 23.05
Posted: Sat Dec 14, 2024 12:06 am
by coits
Lantis wrote: ↑Fri Dec 13, 2024 7:36 am
iptables
I am slowly looking at a transition to nftables for 24.10 but there’s a lot of work ahead for that.
Awesome! thanks for the clarification.
Re: Gargoyle 1.15.x BETA - 2024-11-13 - Based on OpenWrt 23.05
Posted: Sun Dec 15, 2024 9:45 pm
by coits
coits wrote: ↑Sat Dec 14, 2024 12:06 am
Lantis wrote: ↑Fri Dec 13, 2024 7:36 am
iptables
I am slowly looking at a transition to nftables for 24.10 but there’s a lot of work ahead for that.
Awesome! thanks for the clarification.
Hi Lantis,
I have check this link
https://lantisproject.com/downloads/gargoylebuilds and found only this file "gargoyle_1.15.x-mvebu-cortexa9-linksys_wrt32x-squashfs-sysupgrade.bin", is this compatible with wrt3200acm?
Just want to make sure, that it won't brick my router.
Thank you for your hard work!
Re: Gargoyle 1.15.x BETA - 2024-11-13 - Based on OpenWrt 23.05
Posted: Mon Dec 16, 2024 2:50 am
by Lantis
No, it is not.
Did you check page 2?
Or try filtering the table.
Filtered table
Re: Gargoyle 1.15.x BETA - 2024-11-13 - Based on OpenWrt 23.05
Posted: Wed Dec 18, 2024 1:33 am
by coits
Lantis wrote: ↑Mon Dec 16, 2024 2:50 am
No, it is not.
Did you check page 2?
Or try filtering the table.
Filtered table
Thank you Lantis for the link, appreciate it.
Re: Gargoyle 1.15.x BETA - 2024-11-13 - Based on OpenWrt 23.05
Posted: Fri Dec 20, 2024 1:27 am
by angus
Lantis wrote: ↑Wed Nov 20, 2024 6:31 pm
pppoe-relay allows the PPPoE traffic to be sent through a new interface and the downstream then does authentication.
My understanding of PPPoE pass through was that the router handled authentication and then made the WAN IP available on another interface (and essentially became transparent).
Sorry that this bothers some of Lantis' resources.
I was thinking in this scenario: the router handles nothing of PPPoE but relays anything of PPPoE. Authentication happens between LAN client itself and the remote PPPoE server.
Re: Gargoyle 1.15.x BETA - 2024-11-13 - Based on OpenWrt 23.05
Posted: Mon Dec 23, 2024 6:35 pm
by ispyisail
Sorry for the basic question but where have all the TP-Link router builds gone?
Are the routers now out of spec?