Gargoyle Forum

???

I can't find any peers or seeds so it won't download. Another user had the same

Another user had the same

I had a PM from "Trailblazer"

In the end he found the problem was his own firewall?

In case someone is interested. I installed the ispy 2016 june 28 firmware on a Tp-Link WR841N v11 (CA) and it's running solid since 3 days without rebooting. The router was flashed without problem. I have setup quotas, QOS and everything is running as it should since day 1.

The only minor problem is the power led which don't glow when the router is running.

I hope this information can help someone else which have same router than me.

Hi All,
I have not had any success with updating the Dynamic DNS service on my Routers.
When I force an update it tells me to please wait while settings are applied and never completes, however when I refresh, it says "success"
But when I look at the status, it shows that it was never updated.
I am using TP-Link routers WR740N and WR1043ND routers.
See picture.
https://drive.google.com/file/d/0B4ZiQ1 ... sp=sharing

dlogictech wrote:Hi All,
I have not had any success with updating the Dynamic DNS service on my Routers.
When I force an update it tells me to please wait while settings are applied and never completes, however when I refresh, it says "success"
But when I look at the status, it shows that it was never updated.
I am using TP-Link routers WR740N and WR1043ND routers.
See picture.
https://drive.google.com/file/d/0B4ZiQ1 ... sp=sharing

Fixed in v1.9.1. Please see the downloads/news page.

Lantis wrote:

dlogictech wrote:Hi All,
I have not had any success with updating the Dynamic DNS service on my Routers.
When I force an update it tells me to please wait while settings are applied and never completes, however when I refresh, it says "success"
But when I look at the status, it shows that it was never updated.
I am using TP-Link routers WR740N and WR1043ND routers.
See picture.
https://drive.google.com/file/d/0B4ZiQ1 ... sp=sharing

Fixed in v1.9.1. Please see the downloads/news page.

Forgive me but I thought that the latest release 1.9.X (Built 20160626-2350 git@4959105) was based on v1.9.1.

Which is what I am using on these routers.

Nope.
1.9.X is a generic term for any custom firmware for the 1.9 series.
1.9.1 is currently the latest.
In a couple days time if any fixes are released, 1.9.X will become the latest again.

Lantis wrote:Nope.
1.9.X is a generic term for any custom firmware for the 1.9 series.
1.9.1 is currently the latest.
In a couple days time if any fixes are released, 1.9.X will become the latest again.

Thanks for the clarification.
I will try the v1.9.1 build.