Page 3 of 5
Re: Gargoyle on D-Link DIR-300
Posted: Sat Apr 11, 2009 5:45 pm
by ispyisail
fis list
- fis list.jpg (104.64 KiB) Viewed 23258 times
Re: Gargoyle on D-Link DIR-300
Posted: Sat Apr 11, 2009 5:46 pm
by ispyisail
- fis list all.jpg (120.5 KiB) Viewed 23256 times
Re: Gargoyle on D-Link DIR-300
Posted: Sat Apr 11, 2009 11:23 pm
by Eric
Alright, let's try this again.... No guarantees since I don't own a DIR300, but the new version works with my current routers and detects flash addresses and flash size dynamically.
Since I'd like to confirm with you that it works before making it the official download,
I've posted the new version separately here. (Use this and not the download in the download section)
Please let me know if it works, and if it doesn't it would help if in addition to letting me know what error messages are printed out you could run the fis list command again so I can see what's going on. Thanks!
Re: Gargoyle on D-Link DIR-300
Posted: Sat Apr 11, 2009 11:50 pm
by ispyisail
can confirm new version loads with windows xp with out c++ installed
Re: Gargoyle on D-Link DIR-300
Posted: Sun Apr 12, 2009 12:00 am
by ispyisail
Fon Flash / D-link router get into a locked state
- fon flash d-link1.jpg (123.16 KiB) Viewed 23236 times
hang on its still working, ill send this post anyway
Re: Gargoyle on D-Link DIR-300
Posted: Sun Apr 12, 2009 12:08 am
by ispyisail
I'm jumping up and down with excitement
IT WORKED
- fon flash d-link2.jpg (190.82 KiB) Viewed 23233 times
I need to test the router now and see if i can get that to work
Did i tell you i was jumping up and down
Re: Gargoyle on D-Link DIR-300
Posted: Sun Apr 12, 2009 12:37 am
by ispyisail
I'm having trouble getting the config web page
- fon flash d-link10.png (89.13 KiB) Viewed 23219 times
I can't find a broadcast SSID
My PC is pulling a IP address form port 1 on the router but i can't connect to 192.168.1.10
I notice when the router finishes booting there is no command prompt?
I'm going to try gargoyle beta instead of bleeding edge!
Re: Gargoyle on D-Link DIR-300
Posted: Sun Apr 12, 2009 12:55 am
by Eric
The router comes up on IP 192.168.1.1, not 192.168.1.10.
There's no SSID because the wireless is inactive by default until you configure it.
Re: Gargoyle on D-Link DIR-300
Posted: Sun Apr 12, 2009 1:07 am
by ispyisail
duhh
sorry i got 192.168.1.10 <-> 192.168.1.1 arouind the wrong way
I've reflashed using windows xp with no c++ to beta version 4
I notice when the router finishes booting there is no command prompt?
I needed to hit enter
192.168.1.1 works .
just finding user name and password
Re: Gargoyle on D-Link DIR-300
Posted: Sun Apr 12, 2009 1:10 am
by ispyisail
Im in
- gargoyle.png (214.24 KiB) Viewed 23212 times