Page 2 of 2
Re: Access point no wan connection
Posted: Mon Sep 19, 2016 10:59 pm
by probinso
Re: Access point no wan connection
Posted: Tue Sep 20, 2016 5:03 am
by Lantis
I can't see anything obviously wrong.
I can only suggest upgrading to 1.9.1 and trying again however I can't offer any guarantees and am out of ideas.
Re: Access point no wan connection
Posted: Fri Sep 23, 2016 6:16 am
by probinso
Problem solved took cover off found hidden wan port. For some reason the manufacturer only had it setup for Lan connection.
Re: Access point no wan connection
Posted: Mon Oct 24, 2016 2:47 am
by probinso
Thanks for the help last time Eric after finally getting connection established. The link keeps dropping out at the bridge end. I have internet and ssid at the AP When the config page of the bridge looks ok to me I have posted screen shots. I am unsure if I should disable DHCP at the gateway,I am using pppoe to connect to the NBN fixed wireless modem (NTD).
Any help would be appreciated.
https://www.dropbox.com/s/x60j36jt4eln6 ... d.png?dl=0
https://www.dropbox.com/s/dwgcjwfkyv79n ... s.png?dl=0
Re: Access point no wan connection
Posted: Mon Oct 24, 2016 3:28 am
by Lantis
The IP needs to be outside the bridge subnet (it says right there).
Leave DHCP on the gateway.
