Gargoyle Forum

Posted: **Sat Dec 26, 2015 6:20 pm**

edit

I made 2 builds on the 25th

I've now switched them only change

handle buttons using rc.button not hotplug.d, adjust so uci system settings still work

Posted: **Sun Dec 27, 2015 5:47 am**

Are these builds the same as on the download page or only available via the torrent?

Posted: **Sun Dec 27, 2015 1:50 pm**

Only torrent

Posted: **Mon Dec 28, 2015 4:28 pm**

n8b wrote:Connection | Basic | Internet/WAN | Connect Via:
The modem is not there to select.

I tried OpenWrt CC and added two packages:
1st - kmod-usb-net-cdc-ether
2nd - usb-modeswitch
And I got the E3372 working as WAN with the help of:
http://protyposis.net/blog/using-the-hu ... h-openwrt/

Back to this Gargoyle image I see the first package is not installed.

Posted: **Mon Dec 28, 2015 5:29 pm**

n8b wrote:
n8b wrote:Connection | Basic | Internet/WAN | Connect Via:
The modem is not there to select.
I tried OpenWrt CC and added two packages:
1st - kmod-usb-net-cdc-ether
2nd - usb-modeswitch
And I got the E3372 working as WAN with the help of:
http://protyposis.net/blog/using-the-hu ... h-openwrt/

Back to this Gargoyle image I see the first package is not installed.

Can you check and make sure this version of gargoyle does not work?

Posted: **Mon Dec 28, 2015 5:44 pm**

What router is he using? The make file may not have been updated correctly.

Posted: **Mon Dec 28, 2015 6:08 pm**

tl-wdr4300 and Huawei E3372 hilink

1.9.X (Built 20151224-2227 git@3f7f810)

logread -f when I plug in the modem:

Code: Select all

Mon Dec 28 23:04:14 2015 kern.info kernel: [  400.330000] usb 1-1.1: new high-speed USB device number 9 using ehci-platform
Mon Dec 28 23:04:15 2015 kern.info kernel: [  400.490000] usb-storage 1-1.1:1.0: USB Mass Storage device detected
Mon Dec 28 23:04:15 2015 kern.info kernel: [  400.510000] scsi host6: usb-storage 1-1.1:1.0
Mon Dec 28 23:04:15 2015 kern.info kernel: [  401.110000] usb 1-1.1: USB disconnect, device number 9
Mon Dec 28 23:04:16 2015 kern.info kernel: [  401.610000] usb 1-1.1: new high-speed USB device number 10 using ehci-platform
Mon Dec 28 23:04:16 2015 kern.info kernel: [  401.860000] usb-storage 1-1.1:1.2: USB Mass Storage device detected
Mon Dec 28 23:04:16 2015 kern.info kernel: [  401.870000] scsi host7: usb-storage 1-1.1:1.2
Mon Dec 28 23:04:17 2015 kern.notice kernel: [  402.870000] scsi 7:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
Mon Dec 28 23:04:17 2015 kern.notice kernel: [  402.880000] sd 7:0:0:0: [sda] Attached SCSI removable disk
Mon Dec 28 23:04:18 2015 daemon.err block: Unkown action change
Mon Dec 28 23:04:18 2015 daemon.err block: Unkown action change

Posted: **Mon Dec 28, 2015 6:14 pm**

well its definitely supposed to be there.
https://github.com/ericpaulbishop/gargo ... a4077b9d8f

If your router has the usb_storage plugin (which it does) then it should automatically be given the correct cdc-ether mod as well.
For now i'd suggest manually installing the kmod, and trying the next build. Could have been a hiccup in the build process.

Posted: **Mon Dec 28, 2015 6:18 pm**

Lantis wrote: For now i'd suggest manually installing the kmod, and trying the next build.

Thanks - I'll wait for the next build.

Posted: **Mon Dec 28, 2015 6:35 pm**

Building now

Gargoyle Forum

gargoyle-ispy 2015-December-25 09:13.torrent

Re: gargoyle-ispy 2015-December-25 09:13.torrent

Re: gargoyle-ispy 2015-December-25 09:13.torrent

Re: gargoyle-ispy 2015-December-25 09:13.torrent

Re: gargoyle-ispy 2015-December-25 09:13.torrent

Re: gargoyle-ispy 2015-December-25 09:13.torrent

Re: gargoyle-ispy 2015-December-25 09:13.torrent

Re: gargoyle-ispy 2015-December-25 09:13.torrent

Re: gargoyle-ispy 2015-December-25 09:13.torrent

Re: gargoyle-ispy 2015-December-25 09:13.torrent

Re: gargoyle-ispy 2015-December-25 09:13.torrent