Gargoyle Forum

why don't you try and go back to 1.6.2?

sir
i did notgot help from you still about this issue of tnot saving the usb setting

to day i put back 1.6 vertion and it works properly

again i re installed the 1.8
but same issue

so it is clear that some issue is their in the code

chandran wrote:i have recently updated to 1.8 ver tin in my TP-Link TL-WDR3600 v1 the TP-Link TL-WDR3600 is connected via wired LAN to Model No. TL-WR702N and and configerd as Ap which is given a static IP i connect to this via wireless.

I am also running a TL-WDR3600 as an AP but with a PPPoE (wired) connection to an Aus NBNco fixed Wireless Internet. I am also running 2 x USB storage with a number of shares and users. My USB and Internet connection is stable (except for perhaps 1 brief drop-out every 24hrs)

It seems strange that 1.6.2 works OK for you but not 1.8.0 as I have used both OK. I wonder if your Download of 1.8.0 is corrupt? Have to done a checksum on your 1.8.0 Download (or re-downloaded and installed 1.8.0)?

I am also wondering what purpose does the TL-WR702N play in your network? Can you eliminate it and just use the TL-WDR3600? Can you provide a network diagram?

dear sir
thank you for response

1) may be as you say some issue with the downloaded vertion ? i will download again and re install

2) the issue has nothing to with TL-WR702N , conecting of disconnecting that make no difference

only one mistake i did is i did not rdo redownload and install
which i will do now and tell you

now downloaded agian and did the same install still it is same , no change

Could you install the logread plugin and see if the errors with Connectivity and USB generate any errors in the logs?

Also could you try a different USB drive, and the other USB socket on the WDR3600 to see if there is any change?

no use

Also if i enable mac filter systes shows connected but can not get data from net