Page 2 of 3
Re: Gargoyle-ispy 2015-February-08.7z
Posted: Tue Feb 10, 2015 8:14 pm
by Lantis
mckman wrote:Hello,
I currently have a Netgear WNDRMACv2 (Equivalent of WNDR3800)... Has anyone tested any of these newer BB builds on these units and can provide comment on how well the following performs and comment on stability?
Am using 1.7.0 on a WNDR3800 with no issues. Currently 17 days uptime, and it was only rebooted 17 days ago because I made a boo boo with some code I was writing haha.
Re: Gargoyle-ispy 2015-February-08.7z
Posted: Tue Feb 10, 2015 8:23 pm
by mckman
Lantis wrote:mckman wrote:Hello,
I currently have a Netgear WNDRMACv2 (Equivalent of WNDR3800)... Has anyone tested any of these newer BB builds on these units and can provide comment on how well the following performs and comment on stability?
Am using 1.7.0 on a WNDR3800 with no issues. Currently 17 days uptime, and it was only rebooted 17 days ago because I made a boo boo with some code I was writing haha.
Have you noticed any improvement with the wireless range on 2.4ghz or 5ghz versus AA builds?
Re: Gargoyle-ispy 2015-February-08.7z
Posted: Wed Feb 11, 2015 12:31 am
by Lantis
mckman wrote:
Have you noticed any improvement with the wireless range on 2.4ghz or 5ghz versus AA builds?
I kind of want to say yes... But I didn't do any testing to back it up.
Inconclusive I suppose.
Re: Gargoyle-ispy 2015-February-08.7z
Posted: Sat Feb 14, 2015 7:07 am
by Tearitup
I am running this build on a Netgear WNDR3700v1 with no issues as of yet. Great speeds on both wire and wireless.
Will let you all know if something changes.
Re: Gargoyle-ispy 2015-February-08.7z
Posted: Sat Feb 14, 2015 1:23 pm
by phgerin
Still bugs with reported download speed via UPNP when total transfert bytes is greater than 4GB and some troubles with bandwidth graphs:
Re: Gargoyle-ispy 2015-February-08.7z
Posted: Sat Feb 14, 2015 2:53 pm
by nworbnhoj
After a little over 4 days uptime, all WiFi connections were dropped and unable to reconnect. A reboot resolved the issue.
Gargoyle Version:1.7.X (Built 20150207-0832 git@3344fb7)
Model:TP-Link TL-WR1043N/ND v2
Device Configuration:Gateway
Sat Feb 14 16:24:31 2015 daemon.info hostapd: wlan0: STA yy:yy:yy:yy:yy:yy WPA: group key handshake completed (RSN)
Sat Feb 14 16:24:31 2015 daemon.info hostapd: wlan0: STA zz:zz:zz:zz:zz:zz WPA: group key handshake completed (RSN)
Sat Feb 14 16:24:31 2015 daemon.info hostapd: wlan0: STA ww:ww:ww:ww:ww:ww WPA: group key handshake completed (RSN)
Sat Feb 14 16:26:37 2015 daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.11: authenticated
Sat Feb 14 16:26:37 2015 daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.11: associated (aid 4)
Sat Feb 14 16:26:37 2015 daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.11: associated (aid 4)
Sat Feb 14 16:26:37 2015 daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.11: associated (aid 4)
Sat Feb 14 16:26:38 2015 daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx RADIUS: starting accounting session 54D7D8BE-00000072
Sat Feb 14 16:26:38 2015 daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx WPA: pairwise key handshake completed (RSN)
Sat Feb 14 16:26:38 2015 daemon.info dnsmasq-dhcp[21687]: DHCPDISCOVER(br-lan) 192.168.1.11 xx:xx:xx:xx:xx:xx
Sat Feb 14 16:26:38 2015 daemon.info dnsmasq-dhcp[21687]: DHCPOFFER(br-lan) 192.168.1.11 xx:xx:xx:xx:xx:xx
Sat Feb 14 16:26:38 2015 daemon.info dnsmasq-dhcp[21687]: DHCPREQUEST(br-lan) 192.168.1.11 xx:xx:xx:xx:xx:xx
Sat Feb 14 16:26:38 2015 daemon.info dnsmasq-dhcp[21687]: DHCPACK(br-lan) 192.168.1.11 xx:xx:xx:xx:xx:xx JAB-X220
Sat Feb 14 16:34:31 2015 daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx WPA: group key handshake completed (RSN)
Sat Feb 14 16:34:31 2015 daemon.info hostapd: wlan0: STA yy:yy:yy:yy:yy:yy WPA: group key handshake completed (RSN)
Sat Feb 14 16:34:31 2015 daemon.info hostapd: wlan0: STA zz:zz:zz:zz:zz:zz WPA: group key handshake completed (RSN)
Sat Feb 14 16:34:31 2015 daemon.info hostapd: wlan0: STA ww:ww:ww:ww:ww:ww WPA: group key handshake completed (RSN)
Sat Feb 14 16:44:40 2015 daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.11: deauthenticated due to local deauth request
Sat Feb 14 16:44:40 2015 daemon.info hostapd: wlan0: STA ww:ww:ww:ww:ww:ww IEEE 802.11: deauthenticated due to local deauth request
Sat Feb 14 16:44:40 2015 daemon.info hostapd: wlan0: STA zz:zz:zz:zz:zz:zz IEEE 802.11: deauthenticated due to local deauth request
Sat Feb 14 16:44:40 2015 daemon.info hostapd: wlan0: STA yy:yy:yy:yy:yy:yy IEEE 802.11: deauthenticated due to local deauth request
Re: Gargoyle-ispy 2015-February-08.7z
Posted: Tue Feb 17, 2015 10:10 pm
by nworbnhoj
nworbnhoj wrote:After a little over 4 days uptime, all WiFi connections were dropped and unable to reconnect. A reboot resolved the issue.
This issue recurred; after a little under 4 days uptime; and with similar log entries. WiFi performance degraded in the prior hour or so. LAN connections remained operational.
I will now disable the "Guests" SSID and see if that makes any difference.
Re: Gargoyle-ispy 2015-February-08.7z
Posted: Wed Feb 18, 2015 11:34 am
by vladtheodor
Try lower DHCP "Lease Time". 3... 6... 8 hours... Not 12H.
Re: Gargoyle-ispy 2015-February-08.7z
Posted: Wed Feb 18, 2015 4:16 pm
by nworbnhoj
vladtheodor wrote:Try lower DHCP "Lease Time". 3... 6... 8 hours... Not 12H.
Thanks, I will drop the DHCP lease time back to 3 hours. But I am interested in why you make this suggestion. I accepted the 12hr default because I assumed that shorter lease times were only important on a network with a hi host churn rate.
Also, in this case, pretty much all of the WiFi connections have a static IP assignment to facilitate QOS.
Re: Gargoyle-ispy 2015-February-08.7z
Posted: Thu Feb 19, 2015 3:53 pm
by vyvvyan
I just upgraded to 1.7.X (From 1.7.0) and unlike others in this thread, still cannot see the Wifi Scheduling plugin. The Plugins page says it's installed, but Uninstall does nothing. Anyone any tips on how to fix this? I've tried setting the plugin_root to a different directory (by default on a USB stick) but that doesn't change anything either.
Anything I can do from the command line?
Thanks in advance!