Page 2 of 9
Re: Version 1.5.1 & 1.4.4
Posted: Tue Dec 06, 2011 2:33 am
by nohitme
(I apologize for my terrible English)
I was about to upgrade my DIR-825 to 1.51 since I had the same wifi issue. And a weird thing happened. All the settings were gone after I tried to reboot the machine every single time.
Actually it had happened when I tried to use the image file that I compiled myself. I thought it might be some minor issue of testing build. Therefore, I went back to 1.5.0, and everything was fine except wifi.
Now the latest build has the same problem. I have tried v1.4.4 version, which works fine on DIR-825 (at least it keeps the settings)
So does anyone know what the problem might be?
Re: Version 1.5.1 & 1.4.4
Posted: Tue Dec 06, 2011 3:44 am
by Cezary
If you remove modem /dev/ttyUSB1 (serial port) no longer exists. Change wan from 3g to dhcp.
Re: Version 1.5.1 & 1.4.4
Posted: Tue Dec 06, 2011 4:47 am
by ispyisail
I have
still getting these errors
Code: Select all
Dec 6 21:41:01 Gargoyle cron.err crond[18690]: USER root pid 23069 cmd /usr/bin/set_kernel_timezone >/dev/null 2>&1
Dec 6 21:41:31 Gargoyle daemon.err pppd[13419]: Failed to open /dev/ttyUSB1: No such file or directory
Dec 6 21:42:01 Gargoyle daemon.err pppd[13419]: Failed to open /dev/ttyUSB1: No such file or directory
Dec 6 21:42:32 Gargoyle daemon.err pppd[13419]: Failed to open /dev/ttyUSB1: No such file or directory
Dec 6 21:43:03 Gargoyle daemon.err pppd[13419]: Failed to open /dev/ttyUSB1: No such file or directory
Dec 6 21:43:34 Gargoyle daemon.err pppd[13419]: Failed to open /dev/ttyUSB1: No such file or directory
Dec 6 21:44:05 Gargoyle daemon.err pppd[13419]: Failed to open /dev/ttyUSB1: No such file or directory
Dec 6 21:44:36 Gargoyle daemon.err pppd[13419]: Failed to open /dev/ttyUSB1: No such file or directory
Dec 6 21:45:07 Gargoyle daemon.err pppd[13419]: Failed to open /dev/ttyUSB1: No such file or directory
Dec 6 21:45:38 Gargoyle daemon.err pppd[13419]: Failed to open /dev/ttyUSB1: No such file or directory
Dec 6 21:46:09 Gargoyle daemon.err pppd[13419]: Failed to open /dev/ttyUSB1: No such file or directory
Dec 6 21:46:40 Gargoyle daemon.err pppd[13419]: Failed to open /dev/ttyUSB1: No such file or directory
Re: Version 1.5.1 & 1.4.4
Posted: Tue Dec 06, 2011 5:18 am
by Cezary
Press save
Gargoyle doesn't display 3G option if no serial port detected, but hold valid config for 3g.
Re: Version 1.5.1 & 1.4.4
Posted: Tue Dec 06, 2011 9:13 am
by vel
Looks like 1.5.1 fixed issue with wifi drop. My WRT54G-RG is working fine for the last 12 hours. Thanks!
Flashing gargoyle_1.5.1-wrt54g-squashfs.bin did not work for me, so I had to flash gargoyle_1.5.1-brcm47xx-squashfs.trx. Also, saving Custom DNS Servers failed once, but worked second time I've tried.
My Wireless-G PrintServer WPSM54G still can not connect using WPA2 (tried both PSK and AES), but it is the same problem since v1.3.10. Guess it has nothing to do with Gargoyle, there is ticket open
https://dev.openwrt.org/ticket/10151 on OpenWRT trac.
Still not set QoS, will wait a bit, so far all is good with DHCP, static IPs mapped, Static IP (wired) connection, restrictions and quota being set up.
Thanks again Eric!
Re: Version 1.5.1 & 1.4.4
Posted: Tue Dec 06, 2011 10:13 am
by frank604
The WNDR3700 V2 for 1.4.4 and 1.5.1 NA is not shown? Does this mean I can just use gargoyle_1.5.1-ar71xx-wndr3700v2-squashfs-factory.img even if I'm in Canada? Sorry for a noob question but just wanted to be sure.
Or should I install a 1.5.0 NA version and just sysupgrade to 1.5.1?
Re: Version 1.5.1 & 1.4.4
Posted: Tue Dec 06, 2011 10:24 am
by hnl_dk
vel wrote:Looks like 1.5.1 fixed issue with wifi drop. My WRT54G-RG is working fine for the last 12 hours. Thanks!
Flashing gargoyle_1.5.1-wrt54g-squashfs.bin did not work for me, so I had to flash gargoyle_1.5.1-brcm47xx-squashfs.trx. Also, saving Custom DNS Servers failed once, but worked second time I've tried.
My Wireless-G PrintServer WPSM54G still can not connect using WPA2 (tried both PSK and AES), but it is the same problem since v1.3.10. Guess it has nothing to do with Gargoyle, there is ticket open
https://dev.openwrt.org/ticket/10151 on OpenWRT trac.
Still not set QoS, will wait a bit, so far all is good with DHCP, static IPs mapped, Static IP (wired) connection, restrictions and quota being set up.
Thanks again Eric!
Have you tried setting the channel, instead of using the auto-channel option?
Re: Version 1.5.1 & 1.4.4
Posted: Tue Dec 06, 2011 11:20 am
by Eric
frank604: Unlike the v1 WNDR3700, the v2 of this router doesn't require a different firmware image for routers in North America, hence the lack of an NA image. This was only corrected recently, with the last release. So, you should be able to use the gargoyle_1.5.1-ar71xx-wndr3700v2-squashfs-factory.img firmware without a problem.
Re: Version 1.5.1 & 1.4.4
Posted: Tue Dec 06, 2011 11:30 am
by hnl_dk
Re: Version 1.5.1 & 1.4.4
Posted: Tue Dec 06, 2011 12:14 pm
by frank604
Eric wrote:frank604: Unlike the v1 WNDR3700, the v2 of this router doesn't require a different firmware image for routers in North America, hence the lack of an NA image. This was only corrected recently, with the last release. So, you should be able to use the gargoyle_1.5.1-ar71xx-wndr3700v2-squashfs-factory.img firmware without a problem.
Awesome! Great news. Thanks Eric.
