Page 2 of 3
Re: Transmission not working 1.12.0
Posted: Tue Feb 25, 2020 6:23 am
by RomanHK
See where you have the .json file and delete the file there (but you must stop the daemon first, otherwise the daemon will save your configuration as it was!)
The .json configuration file can be found in the directory here:
option config_dir '/tmp/transmission'
Re: Transmission not working 1.12.0
Posted: Tue Feb 25, 2020 6:30 am
by aszat84
RomanHK wrote: ↑Tue Feb 25, 2020 6:23 am
See where you have the .json file and delete the file there (but you must stop the daemon first, otherwise the daemon will save your configuration as it was!)
The .json configuration file can be found in the directory here:
option config_dir
'/tmp/transmission'
I've stopped the transmission, deleted the file from /tmp/usb_mount/0fc81890-01/transmission/settings.json and started the transmission. The file is the same as before.
Re: Transmission not working 1.12.0
Posted: Tue Feb 25, 2020 6:39 am
by RomanHK
Practically this is not possible. The .json file is generated from /etc/config/transmission using the /etc/init.d/transmission startup script.
Do you run it like this? /etc/init.d/transmission start
Re: Transmission not working 1.12.0
Posted: Tue Feb 25, 2020 6:45 am
by aszat84
RomanHK wrote: ↑Tue Feb 25, 2020 6:39 am
Practically this is not possible. The .json file is generated from
/etc/config/transmission using the
/etc/init.d/transmission startup script.
Do you run it like this? /etc/init.d/transmission start
Yes I ran this command /etc/init.d/transmission start
Re: Transmission not working 1.12.0
Posted: Tue Feb 25, 2020 6:57 am
by RomanHK
Hmmm, then only proceed as follows:
1. Edit the /etc/config/transmission file as required
2. Delete the .json file
3. Restart the router
Re: Transmission not working 1.12.0
Posted: Tue Feb 25, 2020 7:05 am
by aszat84
RomanHK wrote: ↑Tue Feb 25, 2020 6:57 am
Hmmm, then only proceed as follows:
1. Edit the
/etc/config/transmission file as required
2. Delete the .json file
3. Restart the router
I did it. Everything is the same
Re: Transmission not working 1.12.0
Posted: Tue Feb 25, 2020 7:12 am
by RomanHK
Paste the entire configuration file from /etc/config/transmission here (if you have passwords there, delete them here).
Re: Transmission not working 1.12.0
Posted: Tue Feb 25, 2020 7:55 am
by aszat84
RomanHK wrote: ↑Tue Feb 25, 2020 7:12 am
Paste the entire configuration file from
/etc/config/transmission here (if you have passwords there, delete them here).
I've restored the default settings and reinstalled everything. configured with the default +user and pw added. now it's working fine. Thanks for your time and help!Much appreciated!
Re: Transmission not working 1.12.0
Posted: Tue Feb 25, 2020 8:24 am
by RomanHK
Now I have noticed that this line is wrong:
option rpc_url '/transmission/
(
viewtopic.php?p=55706#p55706 )
You miss the character ' and it will do the wrong configuration at the end, it will probably be the problem - beware of these manual typos!
O.K., especially it goes, good luck with torrents ...
Re: Transmission not working 1.12.0
Posted: Tue Feb 25, 2020 8:45 am
by aszat84
RomanHK wrote: ↑Tue Feb 25, 2020 8:24 am
Now I have noticed that this line is wrong:
option rpc_url '/transmission/
(
viewtopic.php?p=55706#p55706 )
You miss the character ' and it will do the wrong configuration at the end, it will probably be the problem - beware of these manual typos!
O.K., especially it goes, good luck with torrents ...
Thank you!