Maniac wrote:I noticed the 5 GHz wireless is not working on the 1.13.x build. 2.4 GHz wireless works. 5 GHz DID work on pythonic's 1.11.x build. (I didn't notice until now because I have multiple 5GHz APs).
Just an observation that 1.13.x should be using the ct radio driver and firmware, rather than the original ath10k driver/firmware used in 1.11.x/1.12. In principle this should be transparent, but maybe there are some problems still. If you tried the 160MHz bandwidth option (if that is showing), you might want to try 80MHz instead. I'm not sure whether the 160MHz support is there in the 19.07-rc1 base for that 1.13.x build.
Maniac wrote:@pythonic I never tried 1.11.0 with this specific router, but it works on my old WNDRMACv2.
I will try an OpenWrt Build.
If you want to try my 1.11.0 build for the EA8500 to see whether that has the problem as well, send me a PM listing the files you need and I'll find a way of getting them to you (I still have the build package but had to remove it from my website for space reasons).
) in which reference was made to an issue specific to the EA8500 with resetting the switch during reboot as a result of a patch - commit of said patch had been reversed early in the 18.06 branch but not in master and the 19.07 branch until sometime in the last few weeks. I suspect the reversal was after 19.07-rc1 (which I understand would have been the base of the Lantis 1.13.x build you're now running) but before 19.07-rc2; if so this should be corrected when Lantis next updates his build.