Page 2 of 2
Re: Time based restrictions using UMT not local?
Posted: Fri May 10, 2019 4:13 am
by stevebtas
Yep, that was it. QoS was enabled with a 10Mb link limit. Disabling that gets me back to similar performance to the gateway for speedtest and ping (is this a default with the new build?).
Not sure this would account for some of the slowness that seemed to be happening last night to my HASS box but will keep an eye on it over the weekend and see if anything crops up. I’ve also uninstalled the adblock plugin for the moment just to reduce potential variables.
Re: Time based restrictions using UMT not local?
Posted: Sat May 11, 2019 10:35 pm
by stevebtas
Ok, ran it for 24 hours with no problems then reinstalled and reenabled the adblock plugin. After which had trouble connecting to internet or even the router. I suspect there may be a compatibility issue between the new build and adblock plugin. Even after uninstalling it again the router response via the web interface is very flaky and sluggish
Re: Time based restrictions using UMT not local?
Posted: Sun May 12, 2019 1:22 am
by ispyisail
factory reset?
start again?
Re: Time based restrictions using UMT not local?
Posted: Sun May 12, 2019 3:31 am
by RomanHK
If you have a problem with AdBlock, please read this post first:
viewtopic.php?f=14&t=11829&start=160#p52151
AdBlock takes a lot of system resources, so be careful.
Re: Time based restrictions using UMT not local?
Posted: Sun May 12, 2019 4:54 am
by stevebtas
Did a reflash back to the development version but still getting some dropouts where the web interface comes up as page not found when navigating between screens.
Reflashed again back to the release version of 1.11 and it seems to be stable and a lot more responsive. I had been running adblock on 1.11 before the timezone issue without any apparent problems.
At the moment memory use is at 19% and processor load is at zero. Haven't been game to reinstall adblock - had enough excitement this weekend

Re: Time based restrictions using UMT not local?
Posted: Sun May 12, 2019 5:23 am
by ispyisail
Did a reflash back to the development version
which version?
Re: Time based restrictions using UMT not local?
Posted: Sun May 12, 2019 9:43 am
by stevebtas
The one i had already downloaded.
Gargoyle Version:1.11.X (Built 20190426-2024 git@ddc7c0ba)
Re: Time based restrictions using UMT not local?
Posted: Sun May 12, 2019 3:10 pm
by ispyisail
Try this one
viewtopic.php?f=14&t=12002
1.11.0.x gargoyle-ispy 2019-May-05 03