Gargoyle Forum

A forum to discuss the Gargoyle web interface for Openwrt
https://www.gargoyle-router.com/phpbb/

Next bleeding edge testers wanted

https://www.gargoyle-router.com/phpbb/viewtopic.php?t=11536

Page 2 of 5

Re: Next bleeding edge testers wanted

Posted: Fri Mar 23, 2018 5:25 pm
by rt_rex
Lantis wrote:Only ar71xx for now
I can test on Meraki MR12 or TP-Link TL-WR741-ND.

But I think there are minimal requirements for flash size and ram, some low end AR71xx may not have it.

Re: Next bleeding edge testers wanted

Posted: Fri Mar 23, 2018 8:34 pm
by Lantis
Wr741 is out I think. It barely made it into 1.8 and doesn’t fit 1.9 or 1.10

Re: Next bleeding edge testers wanted

Posted: Tue Mar 27, 2018 12:16 pm
by francisuk1989
is it possible to support the mikrotik rb750r2, I have it on the latest LEDE snapshot build based upon targets/ar71xx/mikrotik/

SoC: Qualcomm QCA9531 (850MHz)
RAM: 64MB
Storage: 16MB

This is the add support when added to LEDE's git back in 2017
https://git.openwrt.org/?p=openwrt/open ... f6aaa6be40
https://git.openwrt.org/?p=openwrt/open ... 6bd5e97c1d

Re: Next bleeding edge testers wanted

Posted: Wed Mar 28, 2018 3:14 am
by ispyisail
Finally got some builds to work

Decided to add the next patches before release

Just for interested these with be the supported routers (for now)

https://goo.gl/YirJ3Z

Re: Next bleeding edge testers wanted

Posted: Wed Mar 28, 2018 3:55 am
by Lantis
Do you know what solved it?

Re: Next bleeding edge testers wanted

Posted: Wed Mar 28, 2018 4:28 am
by ispyisail
Lantis wrote:Do you know what solved it?
No, I assumed it was the patches you guys were working on?

Some images would build, others wouldn't?

Had two machines building 24/7 trying to find a pattern.

Find out tomorrow if the images build

Re: Next bleeding edge testers wanted

Posted: Wed Mar 28, 2018 12:56 pm
by ispyisail
New images at the start of this topic

Re: Next bleeding edge testers wanted

Posted: Wed Mar 28, 2018 4:02 pm
by n8b
Flashed a tl-wdr4300 v1.6 five minutes ago and it's booting and working :)
I did not preserve settings.
Will test some more...

EDIT:
The log shows ERROR on dynamic DNS. I did not configure it at all.

Code: Select all

Wed Mar 28 21:57:10 2018 kern.notice kernel: [    0.000000] Linux version 4.9.87 (user@SVR15) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6489-d11aa1d) ) #0 Sun Mar 18 13:06:00 2018
Wed Mar 28 21:57:10 2018 kern.debug kernel: [    0.000000] MyLoader: sysp=84c31530, boardp=0065cbe4, parts=195ef6a4
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000] SoC: Atheros AR9344 rev 2
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000] Determined physical RAM map:
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000]  memory: 08000000 @ 00000000 (usable)
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Wed Mar 28 21:57:10 2018 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Wed Mar 28 21:57:10 2018 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000] Zone ranges:
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000] Movable zone start for each node
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000] Early memory node ranges
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Wed Mar 28 21:57:10 2018 kern.debug kernel: [    0.000000] On node 0 totalpages: 32768
Wed Mar 28 21:57:10 2018 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 8046bf74, node_mem_map 81000020
Wed Mar 28 21:57:10 2018 kern.debug kernel: [    0.000000]   Normal zone: 256 pages used for memmap
Wed Mar 28 21:57:10 2018 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Wed Mar 28 21:57:10 2018 kern.debug kernel: [    0.000000]   Normal zone: 32768 pages, LIFO batch:7
Wed Mar 28 21:57:10 2018 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Wed Mar 28 21:57:10 2018 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Wed Mar 28 21:57:10 2018 kern.notice kernel: [    0.000000] Kernel command line:  board=TL-WDR4300  console=ttyS0,115200 rootfstype=squashfs noinitrd
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000] Memory: 124872K/131072K available (3181K kernel code, 166K rwdata, 800K rodata, 260K init, 213K bss, 6200K reserved, 0K cma-reserved)
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000] NR_IRQS:51
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000] Clocks: CPU:560.000MHz, DDR:450.000MHz, AHB:225.000MHz, Ref:40.000MHz
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.000009] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.008310] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.081146] pid_max: default: 32768 minimum: 301
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.086170] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.093220] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.103182] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.113689] futex hash table entries: 256 (order: -1, 3072 bytes)
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.120740] NET: Registered protocol family 16
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.126943] MIPS: machine is TP-LINK TL-WDR3600/4300/4310
Wed Mar 28 21:57:10 2018 kern.warn kernel: [    0.136061] registering PCI controller with io_map_base unset
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.393085] PCI host bridge to bus 0000:00
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.397500] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.404812] pci_bus 0000:00: root bus resource [io  0x0000]
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.410757] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.417984] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Wed Mar 28 21:57:10 2018 kern.debug kernel: [    0.426457] pci 0000:00:00.0: [168c:0033] type 00 class 0x028000
Wed Mar 28 21:57:10 2018 kern.err kernel: [    0.426469] pci 0000:00:00.0: invalid calibration data
Wed Mar 28 21:57:10 2018 kern.debug kernel: [    0.431962] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
Wed Mar 28 21:57:10 2018 kern.debug kernel: [    0.432016] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Wed Mar 28 21:57:10 2018 kern.debug kernel: [    0.432091] pci 0000:00:00.0: supports D1
Wed Mar 28 21:57:10 2018 kern.debug kernel: [    0.432102] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Wed Mar 28 21:57:10 2018 kern.debug kernel: [    0.432338] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.432370] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.440204] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.447898] pci 0000:00:00.0: using irq 40 for pin 1
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.453867] clocksource: Switched to clocksource MIPS
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.460322] NET: Registered protocol family 2
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.465858] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.473292] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.480111] TCP: Hash tables configured (established 1024 bind 1024)
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.486969] UDP hash table entries: 256 (order: 0, 4096 bytes)
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.493197] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.500135] NET: Registered protocol family 1
Wed Mar 28 21:57:10 2018 kern.debug kernel: [    0.504853] PCI: CLS 0 bytes, default 32
Wed Mar 28 21:57:10 2018 kern.warn kernel: [    0.508876] Crashlog allocated RAM at address 0x3f00000
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.515403] workingset: timestamp_bits=30 max_order=15 bucket_order=0
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.529253] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.535498] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.553573] io scheduler noop registered
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.557789] io scheduler deadline registered (default)
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.563628] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.570858] console [ttyS0] disabled
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.594749] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.603943] console [ttyS0] enabled
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.611353] bootconsole [early0] disabled
Wed Mar 28 21:57:10 2018 kern.warn kernel: [    0.623076] m25p80 spi0.0: found s25fl064k, expected m25p80
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.640816] m25p80 spi0.0: s25fl064k (8192 Kbytes)
Wed Mar 28 21:57:10 2018 kern.notice kernel: [    0.645991] 5 tp-link partitions found on MTD device spi0.0
Wed Mar 28 21:57:10 2018 kern.notice kernel: [    0.651650] Creating 5 MTD partitions on "spi0.0":
Wed Mar 28 21:57:10 2018 kern.notice kernel: [    0.656547] 0x000000000000-0x000000020000 : "u-boot"
Wed Mar 28 21:57:10 2018 kern.notice kernel: [    0.663042] 0x000000020000-0x000000175788 : "kernel"
Wed Mar 28 21:57:10 2018 kern.notice kernel: [    0.669746] 0x000000175788-0x0000007f0000 : "rootfs"
Wed Mar 28 21:57:10 2018 kern.notice kernel: [    0.676394] mtd: device 2 (rootfs) set to be root filesystem
Wed Mar 28 21:57:10 2018 kern.notice kernel: [    0.682172] 1 squashfs-split partitions found on MTD device rootfs
Wed Mar 28 21:57:10 2018 kern.notice kernel: [    0.688504] 0x000000480000-0x0000007f0000 : "rootfs_data"
Wed Mar 28 21:57:10 2018 kern.notice kernel: [    0.695588] 0x0000007f0000-0x000000800000 : "art"
Wed Mar 28 21:57:10 2018 kern.notice kernel: [    0.701937] 0x000000020000-0x0000007f0000 : "firmware"
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.709774] libphy: Fixed MDIO Bus: probed
Wed Mar 28 21:57:10 2018 kern.info kernel: [    0.724901] switch0: Atheros AR8327 rev. 2 switch registered on ag71xx-mdio.0
Wed Mar 28 21:57:10 2018 kern.info kernel: [    1.395377] libphy: ag71xx_mdio: probed
Wed Mar 28 21:57:10 2018 kern.info kernel: [    2.025260] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd033, driver=Atheros AR8216/AR8236/AR8316]
Wed Mar 28 21:57:10 2018 kern.info kernel: [    2.036810] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
Wed Mar 28 21:57:10 2018 kern.info kernel: [    2.044939] NET: Registered protocol family 10
Wed Mar 28 21:57:10 2018 kern.info kernel: [    2.052749] NET: Registered protocol family 17
Wed Mar 28 21:57:10 2018 kern.info kernel: [    2.057369] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Wed Mar 28 21:57:10 2018 kern.info kernel: [    2.070625] 8021q: 802.1Q VLAN Support v1.8
Wed Mar 28 21:57:10 2018 kern.info kernel: [    2.080409] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Wed Mar 28 21:57:10 2018 kern.info kernel: [    2.088792] Freeing unused kernel memory: 260K
Wed Mar 28 21:57:10 2018 kern.warn kernel: [    2.093300] This architecture does not have kernel memory protection.
Wed Mar 28 21:57:10 2018 kern.notice kernel: [    2.573880] random: fast init done
Wed Mar 28 21:57:10 2018 user.info kernel: [    2.776089] init: Console is alive
Wed Mar 28 21:57:10 2018 user.info kernel: [    2.779744] init: - watchdog -
Wed Mar 28 21:57:10 2018 user.info kernel: [    4.248562] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Wed Mar 28 21:57:10 2018 kern.info kernel: [    4.413007] usbcore: registered new interface driver usbfs
Wed Mar 28 21:57:10 2018 kern.info kernel: [    4.418734] usbcore: registered new interface driver hub
Wed Mar 28 21:57:10 2018 kern.info kernel: [    4.424246] usbcore: registered new device driver usb
Wed Mar 28 21:57:10 2018 kern.info kernel: [    4.435696] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Wed Mar 28 21:57:10 2018 kern.info kernel: [    4.444066] ehci-platform: EHCI generic platform driver
Wed Mar 28 21:57:10 2018 kern.info kernel: [    4.449466] ehci-platform ehci-platform: EHCI Host Controller
Wed Mar 28 21:57:10 2018 kern.info kernel: [    4.455371] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Wed Mar 28 21:57:10 2018 kern.info kernel: [    4.465513] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Wed Mar 28 21:57:10 2018 kern.info kernel: [    4.493904] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Wed Mar 28 21:57:10 2018 kern.info kernel: [    4.501112] hub 1-0:1.0: USB hub found
Wed Mar 28 21:57:10 2018 kern.info kernel: [    4.505321] hub 1-0:1.0: 1 port detected
Wed Mar 28 21:57:10 2018 kern.info kernel: [    4.512546] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Wed Mar 28 21:57:10 2018 kern.info kernel: [    4.520502] ohci-platform: OHCI generic platform driver
Wed Mar 28 21:57:10 2018 user.info kernel: [    4.526887] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Wed Mar 28 21:57:10 2018 user.info kernel: [    4.544672] init: - preinit -
Wed Mar 28 21:57:10 2018 kern.info kernel: [    5.079642] usb 1-1: new high-speed USB device number 2 using ehci-platform
Wed Mar 28 21:57:10 2018 kern.info kernel: [    5.381505] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Wed Mar 28 21:57:10 2018 kern.info kernel: [    5.411775] hub 1-1:1.0: USB hub found
Wed Mar 28 21:57:10 2018 kern.info kernel: [    5.421216] hub 1-1:1.0: 4 ports detected
Wed Mar 28 21:57:10 2018 kern.info kernel: [    6.435119] eth0: link up (1000Mbps/Full duplex)
Wed Mar 28 21:57:10 2018 kern.info kernel: [    6.439895] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Wed Mar 28 21:57:10 2018 kern.notice kernel: [    8.578026] jffs2: notice: (417) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Wed Mar 28 21:57:10 2018 user.info kernel: [    8.595323] mount_root: switching to jffs2 overlay
Wed Mar 28 21:57:10 2018 user.warn kernel: [    8.677083] urandom-seed: Seeding with /etc/urandom.seed
Wed Mar 28 21:57:10 2018 kern.info kernel: [    8.880291] eth0: link down
Wed Mar 28 21:57:10 2018 user.info kernel: [    8.895219] procd: - early -
Wed Mar 28 21:57:10 2018 user.info kernel: [    8.898242] procd: - watchdog -
Wed Mar 28 21:57:10 2018 user.info kernel: [    9.451596] procd: - watchdog -
Wed Mar 28 21:57:10 2018 user.info kernel: [    9.455109] procd: - ubus -
Wed Mar 28 21:57:10 2018 user.info kernel: [    9.615632] procd: - init -
Wed Mar 28 21:57:10 2018 user.info kernel: [   10.075975] kmodloader: loading kernel modules from /etc/modules.d/*
Wed Mar 28 21:57:10 2018 kern.info kernel: [   10.090270] tun: Universal TUN/TAP device driver, 1.6
Wed Mar 28 21:57:10 2018 kern.info kernel: [   10.095455] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Wed Mar 28 21:57:10 2018 kern.info kernel: [   10.106611] gre: GRE over IPv4 demultiplexor driver
Wed Mar 28 21:57:10 2018 kern.info kernel: [   10.114008] ip_gre: GRE over IPv4 tunneling driver
Wed Mar 28 21:57:10 2018 kern.info kernel: [   10.138345] ip6_tables: (C) 2000-2006 Netfilter Core Team
Wed Mar 28 21:57:10 2018 kern.info kernel: [   10.225562]       Hooked IMQ after mangle on PREROUTING
Wed Mar 28 21:57:10 2018 kern.info kernel: [   10.230437]       Hooked IMQ after nat on POSTROUTING
Wed Mar 28 21:57:10 2018 kern.info kernel: [   10.235186] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1, imq_dev_accurate_stats = 1)
Wed Mar 28 21:57:10 2018 kern.info kernel: [   10.244462]       Hooking IMQ before NAT on PREROUTING.
Wed Mar 28 21:57:10 2018 kern.info kernel: [   10.249315]       Hooking IMQ after NAT on POSTROUTING.
Wed Mar 28 21:57:10 2018 kern.info kernel: [   10.323141] u32 classifier
Wed Mar 28 21:57:10 2018 kern.info kernel: [   10.325943]     input device check on
Wed Mar 28 21:57:10 2018 kern.info kernel: [   10.329658]     Actions configured
Wed Mar 28 21:57:10 2018 kern.info kernel: [   10.360359] Mirror/redirect action on
Wed Mar 28 21:57:10 2018 kern.notice kernel: [   10.438511] Bridge firewalling registered
Wed Mar 28 21:57:10 2018 kern.info kernel: [   10.455460] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Wed Mar 28 21:57:10 2018 kern.info kernel: [   10.463588] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Wed Mar 28 21:57:10 2018 kern.info kernel: [   10.537131] Ebtables v2.0 registered
Wed Mar 28 21:57:10 2018 kern.info kernel: [   10.548275] ip_tables: (C) 2000-2006 Netfilter Core Team
Wed Mar 28 21:57:10 2018 kern.info kernel: [   10.580144] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
Wed Mar 28 21:57:10 2018 kern.info kernel: [   10.950936] Netfilter messages via NETLINK v0.30.
Wed Mar 28 21:57:10 2018 kern.info kernel: [   11.017511] xt_time: kernel timezone is -0000
Wed Mar 28 21:57:10 2018 kern.info kernel: [   11.116660] ctnetlink v0.93: registering with nfnetlink.
Wed Mar 28 21:57:10 2018 kern.info kernel: [   11.135319] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
Wed Mar 28 21:57:10 2018 kern.info kernel: [   11.188061] PPP generic driver version 2.4.2
Wed Mar 28 21:57:10 2018 kern.info kernel: [   11.195793] PPP MPPE Compression module registered
Wed Mar 28 21:57:10 2018 kern.info kernel: [   11.202899] NET: Registered protocol family 24
Wed Mar 28 21:57:10 2018 kern.info kernel: [   11.209687] PPTP driver version 0.8.5
Wed Mar 28 21:57:10 2018 kern.debug kernel: [   11.277849] ath: EEPROM regdomain: 0x0
Wed Mar 28 21:57:10 2018 kern.debug kernel: [   11.277858] ath: EEPROM indicates default country code should be used
Wed Mar 28 21:57:10 2018 kern.debug kernel: [   11.277862] ath: doing EEPROM country->regdmn map search
Wed Mar 28 21:57:10 2018 kern.debug kernel: [   11.277877] ath: country maps to regdmn code: 0x3a
Wed Mar 28 21:57:10 2018 kern.debug kernel: [   11.277882] ath: Country alpha2 being used: US
Wed Mar 28 21:57:10 2018 kern.debug kernel: [   11.277886] ath: Regpair used: 0x3a
Wed Mar 28 21:57:10 2018 kern.debug kernel: [   11.290176] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Wed Mar 28 21:57:10 2018 kern.info kernel: [   11.294243] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47
Wed Mar 28 21:57:10 2018 kern.warn kernel: [   11.301132] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Wed Mar 28 21:57:10 2018 kern.debug kernel: [   11.312331] ath: EEPROM regdomain: 0x0
Wed Mar 28 21:57:10 2018 kern.debug kernel: [   11.312338] ath: EEPROM indicates default country code should be used
Wed Mar 28 21:57:10 2018 kern.debug kernel: [   11.312342] ath: doing EEPROM country->regdmn map search
Wed Mar 28 21:57:10 2018 kern.debug kernel: [   11.312357] ath: country maps to regdmn code: 0x3a
Wed Mar 28 21:57:10 2018 kern.debug kernel: [   11.312363] ath: Country alpha2 being used: US
Wed Mar 28 21:57:10 2018 kern.debug kernel: [   11.312367] ath: Regpair used: 0x3a
Wed Mar 28 21:57:10 2018 kern.debug kernel: [   11.322759] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Wed Mar 28 21:57:10 2018 kern.info kernel: [   11.326756] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
Wed Mar 28 21:57:10 2018 user.info kernel: [   11.440570] kmodloader: done loading kernel modules from /etc/modules.d/*
Wed Mar 28 21:57:14 2018 user.notice : Added device handler type: tunnel
Wed Mar 28 21:57:14 2018 user.notice : Added device handler type: Network device
Wed Mar 28 21:57:14 2018 user.notice : Added device handler type: bridge
Wed Mar 28 21:57:14 2018 user.notice : Added device handler type: veth
Wed Mar 28 21:57:14 2018 user.notice : Added device handler type: macvlan
Wed Mar 28 21:57:14 2018 user.notice : Added device handler type: 8021ad
Wed Mar 28 21:57:14 2018 user.notice : Added device handler type: 8021q
Wed Mar 28 21:57:17 2018 kern.info kernel: [   20.514141] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Wed Mar 28 21:57:17 2018 kern.info kernel: [   20.521398] eth0: link up (1000Mbps/Full duplex)
Wed Mar 28 21:57:17 2018 kern.info kernel: [   20.534080] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Wed Mar 28 21:57:17 2018 kern.info kernel: [   20.546572] br-lan: port 1(eth0.1) entered blocking state
Wed Mar 28 21:57:17 2018 kern.info kernel: [   20.552064] br-lan: port 1(eth0.1) entered disabled state
Wed Mar 28 21:57:17 2018 kern.info kernel: [   20.557985] device eth0.1 entered promiscuous mode
Wed Mar 28 21:57:17 2018 kern.info kernel: [   20.562856] device eth0 entered promiscuous mode
Wed Mar 28 21:57:17 2018 kern.info kernel: [   20.595086] br-lan: port 1(eth0.1) entered blocking state
Wed Mar 28 21:57:17 2018 kern.info kernel: [   20.600579] br-lan: port 1(eth0.1) entered forwarding state
Wed Mar 28 21:57:17 2018 kern.info kernel: [   20.606423] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Wed Mar 28 21:57:17 2018 daemon.notice netifd: Interface 'lan' is enabled
Wed Mar 28 21:57:17 2018 daemon.notice netifd: Interface 'lan' is setting up now
Wed Mar 28 21:57:17 2018 daemon.notice netifd: Interface 'lan' is now up
Wed Mar 28 21:57:17 2018 daemon.notice netifd: Interface 'loopback' is enabled
Wed Mar 28 21:57:17 2018 daemon.notice netifd: Interface 'loopback' is setting up now
Wed Mar 28 21:57:17 2018 daemon.notice netifd: Interface 'loopback' is now up
Wed Mar 28 21:57:17 2018 daemon.notice netifd: Interface 'wan' is enabled
Wed Mar 28 21:57:17 2018 daemon.notice netifd: Interface 'wan6' is enabled
Wed Mar 28 21:57:17 2018 daemon.notice netifd: bridge 'br-lan' link is up
Wed Mar 28 21:57:17 2018 daemon.notice netifd: Interface 'lan' has link connectivity
Wed Mar 28 21:57:17 2018 daemon.notice netifd: Network device 'eth0' link is up
Wed Mar 28 21:57:17 2018 daemon.notice netifd: VLAN 'eth0.1' link is up
Wed Mar 28 21:57:17 2018 daemon.notice netifd: Network device 'lo' link is up
Wed Mar 28 21:57:17 2018 daemon.notice netifd: Interface 'loopback' has link connectivity
Wed Mar 28 21:57:17 2018 daemon.notice netifd: VLAN 'eth0.2' link is up
Wed Mar 28 21:57:17 2018 daemon.notice netifd: Interface 'wan' has link connectivity
Wed Mar 28 21:57:17 2018 daemon.notice netifd: Interface 'wan' is setting up now
Wed Mar 28 21:57:17 2018 daemon.notice netifd: Interface 'wan6' has link connectivity
Wed Mar 28 21:57:17 2018 daemon.notice netifd: Interface 'wan6' is setting up now
Wed Mar 28 21:57:17 2018 daemon.notice netifd: Interface 'wan6' is now up
Wed Mar 28 21:57:18 2018 kern.info kernel: [   21.554100] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Wed Mar 28 21:57:18 2018 daemon.notice netifd: wan (1209): udhcpc: started, v1.27.2
Wed Mar 28 21:57:19 2018 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Wed Mar 28 21:57:19 2018 daemon.notice netifd: wan (1209): udhcpc: sending discover
Wed Mar 28 21:57:19 2018 daemon.notice netifd: wan (1209): udhcpc: sending select for 192.168.1.133
Wed Mar 28 21:57:19 2018 daemon.notice netifd: wan (1209): udhcpc: lease of 192.168.1.133 obtained, lease time 43200
Wed Mar 28 21:57:20 2018 daemon.notice netifd: Interface 'wan' is now up
Wed Mar 28 21:57:21 2018 authpriv.info dropbear[1410]: Not backgrounding
Wed Mar 28 21:57:24 2018 daemon.notice procd: /etc/rc.d/S90ddns_gargoyle: ERROR: No valid dynamic DNS service configurations defined
Wed Mar 28 21:57:24 2018 daemon.notice procd: /etc/rc.d/S90ddns_gargoyle: (Did you specify correct configuration file path?)
Wed Mar 28 21:57:25 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led USB1
Wed Mar 28 21:57:25 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led USB2
Wed Mar 28 21:57:25 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led WLAN2G
Wed Mar 28 22:06:37 2018 daemon.info procd: - init complete -
Wed Mar 28 22:06:38 2018 authpriv.info dropbear[1685]: Child connection from 192.168.4.195:57176
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: started, version 2.79rc2 cachesize 150
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: DNS service limited to local subnets
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq-dhcp[1697]: DHCP, IP range 192.168.4.100 -- 192.168.4.249, lease time 12h
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using local addresses only for domain test
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using local addresses only for domain onion
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using local addresses only for domain localhost
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using local addresses only for domain local
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using local addresses only for domain invalid
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using local addresses only for domain example.net
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using local addresses only for domain example.org
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using local addresses only for domain example.com
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.142.171.235#53 for domain micro
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.211.32.162#53 for domain micro
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 66.244.95.20#53 for domain micro
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.142.171.235#53 for domain oss
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.211.32.162#53 for domain oss
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 66.244.95.20#53 for domain oss
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.142.171.235#53 for domain null
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.211.32.162#53 for domain null
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 66.244.95.20#53 for domain null
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.142.171.235#53 for domain ing
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.211.32.162#53 for domain ing
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 66.244.95.20#53 for domain ing
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.142.171.235#53 for domain indy
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.211.32.162#53 for domain indy
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 66.244.95.20#53 for domain indy
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.142.171.235#53 for domain gopher
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.211.32.162#53 for domain gopher
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 66.244.95.20#53 for domain gopher
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.142.171.235#53 for domain geek
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.211.32.162#53 for domain geek
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 66.244.95.20#53 for domain geek
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.142.171.235#53 for domain fur
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.211.32.162#53 for domain fur
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 66.244.95.20#53 for domain fur
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.142.171.235#53 for domain free
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.211.32.162#53 for domain free
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 66.244.95.20#53 for domain free
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.142.171.235#53 for domain bbs
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.211.32.162#53 for domain bbs
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 66.244.95.20#53 for domain bbs
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using 2 more local addresses
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using 12 more nameservers
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: reading /tmp/resolv.conf.auto
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using local addresses only for domain test
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using local addresses only for domain onion
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using local addresses only for domain localhost
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using local addresses only for domain local
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using local addresses only for domain invalid
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using local addresses only for domain example.net
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using local addresses only for domain example.org
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using local addresses only for domain example.com
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.142.171.235#53 for domain micro
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 95.211.32.162#53 for domain micro
Wed Mar 28 22:06:38 2018 daemon.info dnsmasq[1697]: using nameserver 66.244.95.20#53 for domain micro
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 95.142.171.235#53 for domain oss
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 95.211.32.162#53 for domain oss
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 66.244.95.20#53 for domain oss
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 95.142.171.235#53 for domain null
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 95.211.32.162#53 for domain null
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 66.244.95.20#53 for domain null
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 95.142.171.235#53 for domain ing
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 95.211.32.162#53 for domain ing
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 66.244.95.20#53 for domain ing
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 95.142.171.235#53 for domain indy
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 95.211.32.162#53 for domain indy
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 66.244.95.20#53 for domain indy
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 95.142.171.235#53 for domain gopher
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 95.211.32.162#53 for domain gopher
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 66.244.95.20#53 for domain gopher
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 95.142.171.235#53 for domain geek
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 95.211.32.162#53 for domain geek
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 66.244.95.20#53 for domain geek
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 95.142.171.235#53 for domain fur
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 95.211.32.162#53 for domain fur
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 66.244.95.20#53 for domain fur
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 95.142.171.235#53 for domain free
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 95.211.32.162#53 for domain free
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 66.244.95.20#53 for domain free
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 95.142.171.235#53 for domain bbs
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 95.211.32.162#53 for domain bbs
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using nameserver 66.244.95.20#53 for domain bbs
Wed Mar 28 22:06:39 2018 daemon.warn dnsmasq[1697]: ignoring nameserver 192.168.4.1 - local interface
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using 2 more local addresses
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: using 13 more nameservers
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: read /etc/hosts - 5 addresses
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq[1697]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Wed Mar 28 22:06:39 2018 daemon.info dnsmasq-dhcp[1697]: read /etc/ethers - 0 addresses
Wed Mar 28 22:06:41 2018 daemon.info dnsmasq[1697]: read /etc/hosts - 5 addresses
Wed Mar 28 22:06:41 2018 daemon.info dnsmasq[1697]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Wed Mar 28 22:06:41 2018 daemon.info dnsmasq-dhcp[1697]: read /etc/ethers - 0 addresses
Wed Mar 28 22:06:47 2018 authpriv.notice dropbear[1685]: Password auth succeeded for 'root' from 192.168.4.195:57176
Wed Mar 28 22:06:49 2018 daemon.info dnsmasq-dhcp[1697]: DHCPREQUEST(br-lan) 192.168.4.195 00:1f:16:30:fa:46
Wed Mar 28 22:06:49 2018 daemon.info dnsmasq-dhcp[1697]: DHCPACK(br-lan) 192.168.4.195 00:1f:16:30:fa:46 X200s-2
Wed Mar 28 22:07:06 2018 user.notice firewall: Reloading firewall due to ifup of wan6 (eth0.2)
Wed Mar 28 22:07:08 2018 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2)
Wed Mar 28 22:07:14 2018 kern.warn kernel: [   66.142327] ipt_bandwidth: timezone shift of 120 minutes detected, adjusting
Wed Mar 28 22:07:14 2018 kern.warn kernel: [   66.149523]                old minutes west=0, new minutes west=-120
Wed Mar 28 22:07:49 2018 kern.notice kernel: [  100.778866] random: crng init done
EDIT 2:
Here I change DNS from QUAD9 to Custom (192.168.1.1)
uci errors and file not found:

Code: Select all

Wed Mar 28 22:29:07 2018 daemon.err uhttpd[1511]: uci: Entry not found
Wed Mar 28 22:29:07 2018 daemon.err uhttpd[1511]: uci: Entry not found
Wed Mar 28 22:29:07 2018 daemon.err uhttpd[1511]: uci: Entry not found
Wed Mar 28 22:29:08 2018 daemon.err uhttpd[1511]: uci: Invalid argument
Wed Mar 28 22:29:10 2018 daemon.info dnsmasq[5649]: exiting on receipt of SIGTERM
Wed Mar 28 22:29:10 2018 daemon.err uhttpd[1511]: ls: /sys/bus/mdio_bus/drivers/Marvell*/0:*: No such file or directory
Wed Mar 28 22:29:11 2018 daemon.notice netifd: Interface 'lan' is now down
Wed Mar 28 22:29:11 2018 kern.info kernel: [ 1382.570171] br-lan: port 1(eth0.1) entered disabled state
Wed Mar 28 22:29:11 2018 kern.info kernel: [ 1382.588336] device eth0.1 left promiscuous mode
Wed Mar 28 22:29:11 2018 kern.info kernel: [ 1382.592946] device eth0 left promiscuous mode
Wed Mar 28 22:29:11 2018 kern.info kernel: [ 1382.597517] br-lan: port 1(eth0.1) entered disabled state
Wed Mar 28 22:29:11 2018 kern.info kernel: [ 1382.651397] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
Wed Mar 28 22:29:11 2018 daemon.notice netifd: Interface 'lan' is disabled
Wed Mar 28 22:29:11 2018 daemon.notice netifd: VLAN 'eth0.1' link is down
Wed Mar 28 22:29:11 2018 daemon.notice netifd: bridge 'br-lan' link is down
Wed Mar 28 22:29:11 2018 daemon.notice netifd: Interface 'lan' has link connectivity loss
Wed Mar 28 22:29:11 2018 daemon.notice netifd: Interface 'loopback' is now down
Wed Mar 28 22:29:11 2018 daemon.notice netifd: Interface 'loopback' is disabled
Wed Mar 28 22:29:11 2018 daemon.notice netifd: Network device 'lo' link is down
Wed Mar 28 22:29:11 2018 daemon.notice netifd: Interface 'loopback' has link connectivity loss
Wed Mar 28 22:29:11 2018 daemon.notice netifd: Interface 'wan6' is now down
Wed Mar 28 22:29:11 2018 daemon.notice netifd: wan (3695): udhcpc: received SIGTERM
Wed Mar 28 22:29:11 2018 daemon.notice netifd: Interface 'wan' is now down
Wed Mar 28 22:29:11 2018 kern.info kernel: [ 1383.189843] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
Wed Mar 28 22:29:11 2018 daemon.notice netifd: Interface 'wan' is disabled
Wed Mar 28 22:29:11 2018 kern.info kernel: [ 1383.209648] eth0: link down
Wed Mar 28 22:29:11 2018 daemon.notice netifd: Interface 'wan6' is disabled
Wed Mar 28 22:29:11 2018 daemon.notice netifd: VLAN 'eth0.2' link is down
Wed Mar 28 22:29:11 2018 daemon.notice netifd: Interface 'wan' has link connectivity loss
Wed Mar 28 22:29:11 2018 daemon.notice netifd: Interface 'wan6' has link connectivity loss
Wed Mar 28 22:29:11 2018 daemon.notice netifd: Network device 'eth0' link is down
Wed Mar 28 22:29:14 2018 user.notice : Added device handler type: tunnel
Wed Mar 28 22:29:14 2018 user.notice : Added device handler type: Network device
Wed Mar 28 22:29:14 2018 user.notice : Added device handler type: bridge
Wed Mar 28 22:29:14 2018 user.notice : Added device handler type: veth
Wed Mar 28 22:29:14 2018 user.notice : Added device handler type: macvlan
Wed Mar 28 22:29:14 2018 user.notice : Added device handler type: 8021ad
Wed Mar 28 22:29:14 2018 user.notice : Added device handler type: 8021q
Wed Mar 28 22:29:17 2018 kern.info kernel: [ 1388.859453] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Wed Mar 28 22:29:17 2018 kern.info kernel: [ 1388.866707] eth0: link up (1000Mbps/Full duplex)
Wed Mar 28 22:29:17 2018 kern.info kernel: [ 1388.887568] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Wed Mar 28 22:29:17 2018 kern.info kernel: [ 1388.903865] br-lan: port 1(eth0.1) entered blocking state
Wed Mar 28 22:29:17 2018 kern.info kernel: [ 1388.909401] br-lan: port 1(eth0.1) entered disabled state
Wed Mar 28 22:29:17 2018 kern.info kernel: [ 1388.915245] device eth0.1 entered promiscuous mode
Wed Mar 28 22:29:17 2018 kern.info kernel: [ 1388.920280] device eth0 entered promiscuous mode
Wed Mar 28 22:29:17 2018 kern.info kernel: [ 1388.966846] br-lan: port 1(eth0.1) entered blocking state
Wed Mar 28 22:29:17 2018 kern.info kernel: [ 1388.972382] br-lan: port 1(eth0.1) entered forwarding state
Wed Mar 28 22:29:17 2018 kern.info kernel: [ 1388.978189] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Wed Mar 28 22:29:17 2018 daemon.notice netifd: Interface 'lan' is enabled
Wed Mar 28 22:29:17 2018 daemon.notice netifd: Interface 'lan' is setting up now
Wed Mar 28 22:29:17 2018 daemon.notice netifd: Interface 'lan' is now up
Wed Mar 28 22:29:17 2018 daemon.notice netifd: Interface 'loopback' is enabled
Wed Mar 28 22:29:17 2018 daemon.notice netifd: Interface 'loopback' is setting up now
Wed Mar 28 22:29:17 2018 daemon.notice netifd: Interface 'loopback' is now up
Wed Mar 28 22:29:17 2018 daemon.notice netifd: Interface 'wan' is enabled
Wed Mar 28 22:29:17 2018 daemon.notice netifd: Interface 'wan6' is enabled
Wed Mar 28 22:29:17 2018 daemon.notice netifd: bridge 'br-lan' link is up
Wed Mar 28 22:29:17 2018 daemon.notice netifd: Interface 'lan' has link connectivity
Wed Mar 28 22:29:17 2018 daemon.notice netifd: Network device 'eth0' link is up
Wed Mar 28 22:29:17 2018 daemon.notice netifd: VLAN 'eth0.1' link is up
Wed Mar 28 22:29:17 2018 daemon.notice netifd: Network device 'lo' link is up
Wed Mar 28 22:29:17 2018 daemon.notice netifd: Interface 'loopback' has link connectivity
Wed Mar 28 22:29:17 2018 daemon.notice netifd: VLAN 'eth0.2' link is up
Wed Mar 28 22:29:17 2018 daemon.notice netifd: Interface 'wan' has link connectivity
Wed Mar 28 22:29:17 2018 daemon.notice netifd: Interface 'wan' is setting up now
Wed Mar 28 22:29:17 2018 daemon.notice netifd: Interface 'wan6' has link connectivity
Wed Mar 28 22:29:17 2018 daemon.notice netifd: Interface 'wan6' is setting up now
Wed Mar 28 22:29:17 2018 daemon.notice netifd: Interface 'wan6' is now up
Wed Mar 28 22:29:18 2018 kern.info kernel: [ 1389.857561] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Wed Mar 28 22:29:18 2018 daemon.notice netifd: wan (7643): udhcpc: started, v1.27.2
Wed Mar 28 22:29:18 2018 daemon.notice netifd: wan (7643): udhcpc: sending discover
Wed Mar 28 22:29:18 2018 daemon.notice netifd: wan (7643): udhcpc: sending select for 192.168.1.133
Wed Mar 28 22:29:18 2018 daemon.notice netifd: wan (7643): udhcpc: lease of 192.168.1.133 obtained, lease time 43200
Wed Mar 28 22:29:19 2018 daemon.notice netifd: Interface 'wan' is now up
Wed Mar 28 22:29:21 2018 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Wed Mar 28 22:29:22 2018 daemon.err uhttpd[1511]: udhcpc: started, v1.27.2
Wed Mar 28 22:29:22 2018 daemon.err uhttpd[1511]: udhcpc: sending discover
Wed Mar 28 22:29:25 2018 daemon.err uhttpd[1511]: udhcpc: no lease, failing
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: started, version 2.79rc2 cachesize 150
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: DNS service limited to local subnets
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq-dhcp[8015]: DHCP, IP range 192.168.4.100 -- 192.168.4.249, lease time 12h
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using local addresses only for domain test
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using local addresses only for domain onion
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using local addresses only for domain localhost
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using local addresses only for domain local
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using local addresses only for domain invalid
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using local addresses only for domain example.net
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using local addresses only for domain example.org
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using local addresses only for domain example.com
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 95.142.171.235#53 for domain micro
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 95.211.32.162#53 for domain micro
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 66.244.95.20#53 for domain micro
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 95.142.171.235#53 for domain oss
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 95.211.32.162#53 for domain oss
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 66.244.95.20#53 for domain oss
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 95.142.171.235#53 for domain null
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 95.211.32.162#53 for domain null
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 66.244.95.20#53 for domain null
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 95.142.171.235#53 for domain ing
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 95.211.32.162#53 for domain ing
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 66.244.95.20#53 for domain ing
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 95.142.171.235#53 for domain indy
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 95.211.32.162#53 for domain indy
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 66.244.95.20#53 for domain indy
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 95.142.171.235#53 for domain gopher
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 95.211.32.162#53 for domain gopher
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 66.244.95.20#53 for domain gopher
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 95.142.171.235#53 for domain geek
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 95.211.32.162#53 for domain geek
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 66.244.95.20#53 for domain geek
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 95.142.171.235#53 for domain fur
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 95.211.32.162#53 for domain fur
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 66.244.95.20#53 for domain fur
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 95.142.171.235#53 for domain free
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 95.211.32.162#53 for domain free
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 66.244.95.20#53 for domain free
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 95.142.171.235#53 for domain bbs
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 95.211.32.162#53 for domain bbs
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using nameserver 66.244.95.20#53 for domain bbs
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using 2 more local addresses
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using 12 more nameservers
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: reading /tmp/resolv.conf.auto
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using local addresses only for domain test
Wed Mar 28 22:29:25 2018 daemon.info dnsmasq[8015]: using local addresses only for domain onion
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using local addresses only for domain localhost
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using local addresses only for domain local
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using local addresses only for domain invalid
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using local addresses only for domain example.net
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using local addresses only for domain example.org
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using local addresses only for domain example.com
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 95.142.171.235#53 for domain micro
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 95.211.32.162#53 for domain micro
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 66.244.95.20#53 for domain micro
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 95.142.171.235#53 for domain oss
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 95.211.32.162#53 for domain oss
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 66.244.95.20#53 for domain oss
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 95.142.171.235#53 for domain null
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 95.211.32.162#53 for domain null
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 66.244.95.20#53 for domain null
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 95.142.171.235#53 for domain ing
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 95.211.32.162#53 for domain ing
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 66.244.95.20#53 for domain ing
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 95.142.171.235#53 for domain indy
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 95.211.32.162#53 for domain indy
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 66.244.95.20#53 for domain indy
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 95.142.171.235#53 for domain gopher
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 95.211.32.162#53 for domain gopher
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 66.244.95.20#53 for domain gopher
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 95.142.171.235#53 for domain geek
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 95.211.32.162#53 for domain geek
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 66.244.95.20#53 for domain geek
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 95.142.171.235#53 for domain fur
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 95.211.32.162#53 for domain fur
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 66.244.95.20#53 for domain fur
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 95.142.171.235#53 for domain free
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 95.211.32.162#53 for domain free
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 66.244.95.20#53 for domain free
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 95.142.171.235#53 for domain bbs
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 95.211.32.162#53 for domain bbs
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using nameserver 66.244.95.20#53 for domain bbs
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using 2 more local addresses
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: using 14 more nameservers
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: read /etc/hosts - 5 addresses
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq[8015]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Wed Mar 28 22:29:26 2018 daemon.info dnsmasq-dhcp[8015]: read /etc/ethers - 0 addresses
Wed Mar 28 22:29:26 2018 daemon.err uhttpd[1511]: uci: Entry not found
Wed Mar 28 22:29:26 2018 daemon.err uhttpd[1511]: arping: interface br-wan not found: No such device
Wed Mar 28 22:29:28 2018 daemon.err uhttpd[1511]: sh: write error: Broken pipe
Wed Mar 28 22:29:53 2018 user.notice firewall: Reloading firewall due to ifup of wan6 (eth0.2)
Wed Mar 28 22:29:55 2018 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2)
EDIT 3:
When backing up configuration I get:

Code: Select all

Wed Mar 28 22:42:55 2018 daemon.err uhttpd[1511]: tar: removing leading '/' from member names
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]: Usage: uci [<options>] <command> [<arguments>]
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]: Commands:
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       batch
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       export     [<config>]
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       import     [<config>]
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       changes    [<config>]
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       commit     [<config>]
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       add        <config> <section-type>
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       add_list   <config>.<section>.<option>=<string>
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       del_list   <config>.<section>.<option>=<string>
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       show       [<config>[.<section>[.<option>]]]
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       get        <config>.<section>[.<option>]
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       set        <config>.<section>[.<option>]=<value>
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       delete     <config>[.<section>[[.<option>][=<id>]]]
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       rename     <config>.<section>[.<option>]=<name>
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       revert     <config>[.<section>[.<option>]]
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       reorder    <config>.<section>=<position>
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]: Options:
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       -c <path>  set the search path for config files (default: /etc/config)
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       -d <str>   set the delimiter for list values in uci show
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       -f <file>  use <file> as input instead of stdin
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       -m         when importing, merge data into an existing package
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       -n         name unnamed sections on export (default)
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       -N         don't name unnamed sections
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       -p <path>  add a search path for config change files
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       -P <path>  add a search path for config change files and use as default
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       -q         quiet mode (don't print error messages)
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       -s         force strict mode (stop on parser errors, default)
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       -S         disable strict mode
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:       -X         do not use extended syntax on 'show'
Wed Mar 28 22:42:58 2018 daemon.err uhttpd[1511]:
Backup is missing hostname as part of filename
File is called backup__20180328_224258.tar.gz
In previous versions the hostname was between the two underscores.

Thanks for the builds :D

Re: Next bleeding edge testers wanted

Posted: Wed Mar 28, 2018 5:24 pm
by Lantis
DDNS is not an error.
Thanks for the rest will investigate.

Re: Next bleeding edge testers wanted

Posted: Thu Mar 29, 2018 1:17 am
by phgerin
Upgraded wdr3600 from LEDE to Gargoyle using the factory image, did not preserve settings.
Everything is working great for now, testing.

Unable to add snmpd via command line:

root@Gargoyle:~# opkg update
Downloading package list for %n_routing source...
Package list for %n_routing downloaded successfully.
root@Gargoyle:~# opkg install snmpd
ERROR: No package named snmpd found, try updating your package lists


Edit: Thanks once again !
All times are UTC-04:00
Page 2 of 5

Powered by phpBB® Forum Software © phpBB Limited