Page 2 of 2
Re: Nexx WT3020F WLAN problems
Posted: Mon Jan 09, 2017 5:18 pm
by ViBE
So no way to fix this? What kind of issue is this? Hardware or software? Am I the only affected?
The maximum what I saw was 144 Mbps. It is not clear what fullspeed means exactly. But the bandwidth is not the biggest problem. Pocket loss cause much more trouble.
Re: Nexx WT3020F WLAN problems
Posted: Mon Jan 09, 2017 11:44 pm
by Lantis
I couldn't be certain but I think hardware related.
You could try Openwrt firmware and see if the same behaviour?
Or reload Gargoyle and see if fixed.
Re: Nexx WT3020F WLAN problems
Posted: Thu Jan 26, 2017 1:38 pm
by ViBE
I will test it with OpenWRT soon. I ordered another one for several reasons. When it's arrive I will do some tests.
Reflashing does not do anything sadly. I tried already.
Re: Nexx WT3020F WLAN problems
Posted: Sat Feb 11, 2017 2:35 pm
by ViBE
Another Nexx device has arrived. I installed the latest Gargoyle and...it's also have packet loss issue
Re: Nexx WT3020F WLAN problems
Posted: Sat Feb 11, 2017 5:00 pm
by Lantis
Now that you have a spare, test openwrt too
Re: Nexx WT3020F WLAN problems
Posted: Sat Feb 11, 2017 6:17 pm
by ViBE
Absolutely. Do I need to do any workarounds or I can update directly with an OpenWRT *sysupgrade image?
Re: Nexx WT3020F WLAN problems
Posted: Sat Apr 08, 2017 12:56 pm
by ViBE
Lantis wrote:Now that you have a spare, test openwrt too
I did some tests. I tested the following builds:
(Gargoyle 1.9.1 and 1.9.2 already)
OpenWRT 15.05.1
OpenWRT custom version based on BB
LEDE 17.01.0-r3205-59508e3
The conclusion:
All official OpenWRT based firmwares/variants are wrong
All cause packet loss on wifi. No exception. Not sure what cause this but all lose a lot. I hope it's a driver issue. The only good thing that the custom WRT what I tested allowed 40 Mhz bandwidth so it can reach higher throughput. Where and how can I report this problem?
Re: Nexx WT3020F WLAN problems
Posted: Sat Apr 08, 2017 6:05 pm
by Lantis
LEDE forums and LEDE bug tracker