Tor

[ispyisail]

Im finding the answers to my own questions

Tor Client mode:

- Enabled, togggled by each host

I understand "Enabled all" but would like to understand how toggled works?

[DoesItMatter]

Weird, I did not see that Tor portion on my Login screen.

I'll do a couple reboots and check again when I get home.

Did you have to do any special config to enable Tor?

[ispyisail]

http://www.gargoyle-router.com/wiki/doku.php?id=tor

[ispyisail]

I suspect you haven't enabled "Enabled, Toggled By Each Host"

[DoesItMatter]

I suspect you haven't enabled "Enabled, Toggled By Each Host"

This does not show up at all.

I tried a reset to defaults, then I flashed back to 1.4.3, and then
I re-upgraded back to the latest 1.5.x

What router do you use ispyisail?

I'm wondering if this is only included on firmware larger than 4MB?

The DIR-601 does not have TOR included it seems (4MB flash)

I'll see if I can upgrade my WZR-HP-G300NH this weekend.

I just checked my firmwares and the firmware you posted.

Eric's 1.5.0 for Dir-601 and your latest version are about the same size
Eric's 1.5.0 for the WZR-HP-G300NH is 5MB
Your 1.5.x with TOR for the WZR-HP-G300NH is 6MB in size

I think 4MB flash routers may be not have TOR included.
Must not have enough room for all the features.

[ispyisail]

TP-Link TL-WR1043ND v1-1.8

Strange

I'm using the same firmware as you guys?

I've got other routers if need be

[DoesItMatter]

TP-Link TL-WR1043ND v1-1.8

Strange

I'm using the same firmware as you guys?

I've got other routers if need be

Yea, that router has 8MB flash chip.

Check the downloads section - the WR1043ND 1.5.0 is 5.3MB
Your file you just compiled for WR1043ND 1.5.x is 6.4MB

It seems as if 4MB flash/16MB ram routers are not enough anymore.
I believe I have been saying that for a while heh.

[ispyisail]

The question is at what point can I update the wiki saying tor does not work on 4meg routers as a fact?

[DoesItMatter]

The question is at what point can I update the wiki saying tor does not work on 4meg routers as a fact?

I suspect Eric has to chime in on this.

There is a VERY obvious difference on the 4MB images and the
8MB images though - about 1MB of extra stuff in the 8MB images.

I would think there is some config flag for 4MB flash to not
include certain features in the compilation.

Which makes me wonder if you could have compilation options
in newer versions of Gargoyle?

For example, maybe people who don't need the graphical bandwidth
monitor features or the DDNS stuff, could leave that out and have TOR?

[ispyisail]

I would think there is some config flag for 4MB flash to not
include certain features in the compilation.

I can confirm that my 4mb D-Link dir-300 does not show Tor