TP-link factory firmware install on gargoyle

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

Post Reply
balange
Posts: 8
Joined: Wed May 18, 2011 12:04 pm

TP-link factory firmware install on gargoyle

Post by balange »

Hi.
I'd like to install back the tp-link firmware on 941nd.
How can I do that? Simply install factory bin in gargoyle???

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: TP-link factory firmware install on gargoyle

Post by DoesItMatter »

http://wiki.openwrt.org/toh/tp-link/tl- ... l.firmware

Follow instructions there.

Remember Gargoyle is an ENHANCED GUI for OpenWRT
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

raiko
Posts: 31
Joined: Mon Jun 06, 2011 1:50 am

Re: TP-link factory firmware install on gargoyle

Post by raiko »

You may also refer to this page: http://www.gargoyle-router.com/phpbb/vi ... f=6&t=1108 (Also, by DoesItMatter)

balange
Posts: 8
Joined: Wed May 18, 2011 12:04 pm

Re: TP-link factory firmware install on gargoyle

Post by balange »

Hi,
thanks, but the biggest problem, that I can't find an image with "boot" in its name.
Can't somebody produce an image like for the wr1043nd for reverting for the original?

nebbia88
Posts: 53
Joined: Thu Feb 17, 2011 6:53 am

Re: TP-link factory firmware install on gargoyle

Post by nebbia88 »

i think you can use "webrevert file" from dd-wrt forum, but i can't promise you anything and i'm not responsible! ^^
i think it's safer to ask in openwrt forum.
Last edited by nebbia88 on Mon Nov 21, 2011 10:14 am, edited 1 time in total.

behappy
Posts: 84
Joined: Thu Mar 31, 2011 5:06 pm

Re: TP-link factory firmware install on gargoyle

Post by behappy »

balange wrote:Hi,
thanks, but the biggest problem, that I can't find an image with "boot" in its name.
Can't somebody produce an image like for the wr1043nd for reverting for the original?
Get it here from gargoyle documentation

balange
Posts: 8
Joined: Wed May 18, 2011 12:04 pm

Re: TP-link factory firmware install on gargoyle

Post by balange »

Thanks behappy, but it is for 1043nd and not for my 941nd!

Ysdadsdslo
Posts: 12
Joined: Wed Aug 06, 2014 7:03 am

Re: TP-link factory firmware install on gargoyle

Post by Ysdadsdslo »

What I read I really liked it. Thank you for your information!
dubli

Post Reply