Need help for my WZR-HP-G300NH

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

Post Reply
yc3948
Posts: 164
Joined: Sat Sep 10, 2011 1:04 am

Need help for my WZR-HP-G300NH

Post by yc3948 »

I successfuly flashed my WZR-HP-G300NH today but it died after restore the configuration backup from my linksys WRT54GL. I tried to 30/30/30 but not working, and I also tried to reset by holding reset button for 10 secs also not working. Please help!

My WZR-HP-G300NH flashed gargoyle_1.4.1-ar71xx-wzr-hp-g300nh-squashfs-sysupgrade.bin

and my linksys WRT54GL flashed gargoyle_1.3.16-wrt54g-squashfs.bin

and the backup file is backup.tar.gz

Could you please let me know any solutions? Thanks very much.
Buffalo WZR-HP-G300NH2 DD-WRT v24SP2-MULTI (10/31/11) std
Buffalo WZR-HP-G300NH Gargoyle 1.5.9+1f082daf
Linksys WRT54GL Gargoyle 1.4.4
TP-Link TL-WR1043ND Gargoyle 1.5.9+1f082daf

pbix
Developer
Posts: 1373
Joined: Fri Aug 21, 2009 5:09 pm

Re: Need help for my WZR-HP-G300NH

Post by pbix »

Linksys WRT1900ACv2
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM

yc3948
Posts: 164
Joined: Sat Sep 10, 2011 1:04 am

Re: Need help for my WZR-HP-G300NH

Post by yc3948 »

Thx but not working too...
Buffalo WZR-HP-G300NH2 DD-WRT v24SP2-MULTI (10/31/11) std
Buffalo WZR-HP-G300NH Gargoyle 1.5.9+1f082daf
Linksys WRT54GL Gargoyle 1.4.4
TP-Link TL-WR1043ND Gargoyle 1.5.9+1f082daf

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Need help for my WZR-HP-G300NH

Post by DoesItMatter »

yc3948 wrote:I successfuly flashed my WZR-HP-G300NH today but it died after restore the configuration backup from my linksys WRT54GL. I tried to 30/30/30 but not working, and I also tried to reset by holding reset button for 10 secs also not working. Please help!
BAD BAD BAD idea...

You must NEVER flash a different config backup from a different router.

The only way this could be used is if you were backing up
Identical Hardware model and revisions

I.E. backup from a Linksys WRT54G-TM and restore to WRT54G-TM

Since you restored a Broadcom config backup to an Atheros device,
you will have to go in via Serial console and reload this firmware:

gargoyle_1.4.1-ar71xx-wzr-hp-g300nh-squashfs-tftp.bin

TFTP that via Serial Console and you should be OK

http://www.dd-wrt.com/wiki/index.php/Bu ... -HP-G300NH

Check that page and links in the page for recovery help.
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

Post Reply