Version 1.13.0 : Based on OpenWrt 19.07.8

[ViBE]

connect my external HDD back. for several reasons i have a hub. the hub has an indicator led which lights up when it's connected.

so the router boots up and somehow now the hub's led only lights up for a 5-6 seconds and than goes off. i checked the hub with other devices and it works correctly. but the router power down it after boot or just don't detect it. after boot no USB devices detected. and this also true for any directly connected USB devices.

[Lantis]

I expect you will need to troubleshoot this locally. That router doesn’t have the usb storage plug-in installed by default so other components may be missing that are required.

[ViBE]

oh. that's because of the filesize cut thing what you mentioned before? the repos fixed as you adviced so i guess i can install any plugins. what plugins are needed?

[Lantis]

Usb storage without sharing should be sufficient

[pythonic]

if i connect it via cable to my main router it cannot get IP for some reason.

Hmmm... I don't recall whether I tested that configuration (was more interested in using my Mango with a 4G dongle).

Follow-up in the build thread.

[gerardo4020]

Hello guys

I have a problem with the internet network speed.

I have contracted a 200 mbps fiber optic plan, but I only get that speed for a few minutes after turning on the router.

I have connected using wired or wifi and the result is the same, it only gives the speed just a few minutes after turning on the router

I have an archer c7 v2

Any suggestion in the configuration, something to modify to improve the connection speed...?

[Lantis]

What speed does it drop to?
I’d suggest the router isn’t fast enough to keep up. You can try disabling bandwidth monitoring (/etc/init.d/bwmon_gargoyle stop) and QoS to check.

[gerardo4020]

What speed does it drop to?
I’d suggest the router isn’t fast enough to keep up. You can try disabling bandwidth monitoring (/etc/init.d/bwmon_gargoyle stop) and QoS to check.

I stopped bwmon_gargoyle

now it reaches a speed of 52 mbps,

Qos is disabled on the interface

I improve a little...

[ispyisail]

Router reset (factory reset) to find your base speed

[gerardo4020]

Router reset (factory reset) to find your base speed

I have performed a factory reset and the problem has been solved.

Receiving full speed

Additionally, I will do a hard reset 30/30/30 to put it back in operation.

thanks for the support and advice