Linksys WRT400N

General discussion about Gargoyle, OpenWrt or anything else even remotely related to the project

Moderator: Moderators

Post Reply
User avatar
Dark_Shadow
Posts: 8
Joined: Sat Apr 23, 2011 8:46 pm

Linksys WRT400N

Post by Dark_Shadow »

I have search the board for "400" and WRT400N" but have come up empty. Has a thread been started? Are there installation instruction for Gargoyle on the WRT400N. I have found the files in the download section.

TIA

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Linksys WRT400N

Post by DoesItMatter »

http://wiki.openwrt.org/inbox/linksys/wrt400n

Should apply for Gargoyle as well.

Looks like this is the one main caveat so far:

There are two independent radio chips, the second only works at 5Ghz. You can not use it for two different 2.4Ghz signals. You can not do simultaneous linked connections.

1.3.13 should flash just fine.
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

User avatar
Dark_Shadow
Posts: 8
Joined: Sat Apr 23, 2011 8:46 pm

Re: Linksys WRT400N

Post by Dark_Shadow »

This is not a problem since the 5ghz chip has never been able to do 2.4ghz Even in the linksys firmware.

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Linksys WRT400N

Post by DoesItMatter »

Try it out and let us know how it goes!

By the way - you may want to check out this post:

http://www.gargoyle-router.com/phpbb/vi ... ?f=7&t=980

It's about button handlers.

You may have to program the buttons yourself at first.

Not too hard to do - and knowing your testing- should be cake!
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

User avatar
Dark_Shadow
Posts: 8
Joined: Sat Apr 23, 2011 8:46 pm

Re: Linksys WRT400N

Post by Dark_Shadow »

I will give it a go this weekend, and post my results.

User avatar
Dark_Shadow
Posts: 8
Joined: Sat Apr 23, 2011 8:46 pm

Re: Linksys WRT400N

Post by Dark_Shadow »

Reverted my 400 to OEM FW from dd-wrt. Upgraded via the webui with gargoyle_1.3.13-ar71xx-wrt400n-squashfs-factory.bin.

Used a laptop with windows 7 connected via wire to the router. Had to use IE, firefox kept saying invalid path after the revert for everything including OEM FW.

Seems to be running alright at this time. The radios are not configurable separately.
WRT400N Wireless Config
WRT400N Wireless Config
ScreenShot001.png (41.52 KiB) Viewed 10293 times
The Wireless LED doesn't work at all. The wireless security LED is on, even when wireless security is disabled.

I will try to update my wiki page this weekend as well.

http://infodepot.wikia.com/wiki/Linksys_WRT400N_v1.0

EDIT: oh yea forgot to mention I have it configured as 2.4/5GHz WAP

User avatar
Dark_Shadow
Posts: 8
Joined: Sat Apr 23, 2011 8:46 pm

Re: Linksys WRT400N

Post by Dark_Shadow »

5GHz radio isn't seen by clients.

@dev's let me know what kinda output you'd like to have to further development.

User avatar
Dark_Shadow
Posts: 8
Joined: Sat Apr 23, 2011 8:46 pm

Re: Linksys WRT400N

Post by Dark_Shadow »

I would like to revert back to the linksys firmware so I can test other options. How is this done in gargoyle? what does the wrt400n-squashfs-factory do?

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Linksys WRT400N

Post by DoesItMatter »

http://www.gargoyle-router.com/phpbb/vi ... f=8&t=1212

Check that thread on me going from

Gargoyle -> OpenWRT -> DD-WRT

Since the WRT400N is AR71XX based, should be similar.

The reason I had to goto OpenWRT first is that Gargoyle would
not take the huge 12MB files needed to revert back to
DD-WRT / Buffalo firmware. OpenWRT did take them.

If the WRT400N stock Linksys firmware is around 5-6 MB, you
may be able to just go from Gargoyle -> Linksys via the GUI

Not sure if you have to add some magic numbers to the header.

The "squashfs-factory" files are for initial flashing from
stock/factory firmware, and after you are on gargoyle,
you use the sysupgrade versions of the firmware.

---------------

Edit: Just checked - Linksys firmware for the WRT400N is
under 4MB - should be able to flash it from Gargoyle's GUI.
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

User avatar
Dark_Shadow
Posts: 8
Joined: Sat Apr 23, 2011 8:46 pm

Re: Linksys WRT400N

Post by Dark_Shadow »

Got into major trouble and somehow screwed a file up that I uploaded to the 400n. Luckily I got some help from LOM. So to try to help anyone else who gets in my position, I am providing a file for the wrt400n that can be used through the WEBUI. Use at your own risk. I have tried it several times and worked every time.

http://www.4shared.com/file/U6ozaiF3/wr ... d-wrt.html

Post Reply