Usage reset to 0% after modifying/saving existing qoutas

Report issues relating to bandwith monitoring, bandwidth quotas or QoS in this forum.

Moderator: Moderators

Post Reply
batotoy
Posts: 2
Joined: Thu Jul 14, 2022 9:12 pm

Usage reset to 0% after modifying/saving existing qoutas

Post by batotoy »

After setting a quotas for a specific IP then have it run for few days with a usage counting...then after modifying quota policy to add more IP to it, the usage has been reset to 0% after saving. Am I missing something?

FW version: 1.10.0
ASUS WL500W

Lantis
Moderator
Posts: 6721
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Usage reset to 0% after modifying/saving existing qoutas

Post by Lantis »

If you add an additional IP to the quota, it is no longer the same quota and is reset.
There will be a feature in the future that will let you set the quota percentage manually again, but it is not yet available.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

batotoy
Posts: 2
Joined: Thu Jul 14, 2022 9:12 pm

Re: Usage reset to 0% after modifying/saving existing qoutas

Post by batotoy »

Thank you Lantis!

Hopefully it will be added on next firmware update, and ability to add MAC addresses aside from IP since the MAC is unique for every device.

Post Reply