bwmon and port redirection

Report issues relating to bandwith monitoring, bandwidth quotas or QoS in this forum.

Moderator: Moderators

Post Reply
marcinkk
Posts: 7
Joined: Sun Mar 05, 2017 5:09 pm

bwmon and port redirection

Post by marcinkk »

Hi,

I'm not sure if my problem can be explained as in the title of this topic, but maybe the port redirection is the cause of the following behavior:

I configured OpenVPN on the router with Gargoyle and everything worked fine but performance of the connection was the problem. About 10Mbit/s maximum. So I set up the OpenVPN server on the PC inside local network, then made port redirection to this service, and finally connected client to this server. Generally it works fine but my problem is that the traffic from this tunnel is not displayed in statistics. Is it treated as local? Does any redirected traffic is treated as local?

Regards,
Martin

Lantis
Moderator
Posts: 6721
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: bwmon and port redirection

Post by Lantis »

Is the client inside or outside your network?
Port redirection, you mean you've forwarded port 1194 to the desktop?
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

marcinkk
Posts: 7
Joined: Sun Mar 05, 2017 5:09 pm

Re: bwmon and port redirection

Post by marcinkk »

Client is somewhere in the Internet.

Server is inside my local network, and yes, I forwarded port 8094 (where OpenVPN server listens) to this PC.

Lantis
Moderator
Posts: 6721
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: bwmon and port redirection

Post by Lantis »

It must first pass through the WAN port, so no it can't be "local". It has to be in the statistics.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

marcinkk
Posts: 7
Joined: Sun Mar 05, 2017 5:09 pm

Re: bwmon and port redirection

Post by marcinkk »

I agree that "it has to be" but it is not included :(

I'm using Gargoyle 1.13 with active "flow offloading". Maybe this is the reason?

Lantis
Moderator
Posts: 6721
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: bwmon and port redirection

Post by Lantis »

Yes that is the reason.
Gargoyle features are not generally compatible with flow accelerators.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Post Reply