Can anyone point me to or give me directions on how to do a clean install through putty? At some point it seems luci got corrupt and it keeps causing issues with Gargoyle. I can't sign in via the gui and have to put it in recovery/failsafe mode. Doing that I can sign in through Putty. Is there a way to remove everything and then install Gargoyle on that as a clean slate?
Thanks,
Flak
WRT1200AC soft bricked
Moderator: Moderators
Re: WRT1200AC soft bricked
Does this command erase everything so it starts fresh and I just install the firmware via putty?
umount /overlay && jffs2reset && reboot now
umount /overlay && jffs2reset && reboot now
Re: WRT1200AC soft bricked
Commands via ssh (PuTTY) to flash Gargoyle (1.11.0) firmware:
If you flash from Linksys Firmware, use the Web interface and use this file: http://www.gargoyle-router.com/download ... actory.img
If you already have OpenWrt or Gargoyle:
EDIT:
If you only want to reset to the default configuration (forgotten password, wrong configuration, ...), just go to "Failsafe Mode" and delete the entire configuration, first try "Soft Factory Reset" and if it does not help "Hard Factory Reset" .
If you flash from Linksys Firmware, use the Web interface and use this file: http://www.gargoyle-router.com/download ... actory.img
If you already have OpenWrt or Gargoyle:
Code: Select all
wget http://www.gargoyle-router.com/downloads/images/mvebu/gargoyle_1.11.0-mvebu-cortexa9-linksys-wrt1200ac-squashfs-sysupgrade.bin -P /tmp/
sysupgrade -n -v /tmp/gargoyle_1.11.0-mvebu-cortexa9-linksys-wrt1200ac-squashfs-sysupgrade.bin
If you only want to reset to the default configuration (forgotten password, wrong configuration, ...), just go to "Failsafe Mode" and delete the entire configuration, first try "Soft Factory Reset" and if it does not help "Hard Factory Reset" .
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users