Hi everyone.
please help me!
i flash firmware gargoyle 1.10 to Wr740n. everything is ok
but i can not creat a newpassword when using wr740n is repeater. (don't have a place to input password of repeater)
the password of new wifi must same the main wifi.
Thanks very much!
The password will automatically be the same. There is no need to enter it into an additional field.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
That wouldn't really make it a "repeater" then would it?
Your configuration isn't supported in the GUI, you can change the password at the command line only.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
The config file is /etc/config/wireless.
There is going to be one section for your connection to the upstream AP, and one for the repeater. Change the password in the repeater section only, then reboot the router.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Lantis wrote:The command line can be accessed by following the instructions here: viewtopic.php?f=8&t=8505
The config file is /etc/config/wireless.
There is going to be one section for your connection to the upstream AP, and one for the repeater. Change the password in the repeater section only, then reboot the router.
