This execution path doesn’t exist in the new patch, please trace it out.
This occurred because in the old patch it also returned 0 so no error.
Now it will either return success or failure, not both.
IMQ@NAT kernel modul issue
Moderator: Moderators
Re: IMQ@NAT kernel modul issue
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: IMQ@NAT kernel modul issue
Brings the first build test results from your repository. Perfect 
.
Linksys WRT3200ACM = (10x restart without QoS, 20x restart with QoS) = O.K.
Turris Omnia = (5x restart without QoS, 20x restart with QoS) = O.K.
I already see success because you managed to get NAT first and then IMQ as needed. Good job +1.
I will continue to test and report any changes here. Thank you.
.Linksys WRT3200ACM = (10x restart without QoS, 20x restart with QoS) = O.K.
Turris Omnia = (5x restart without QoS, 20x restart with QoS) = O.K.
I already see success because you managed to get NAT first and then IMQ as needed. Good job +1.
I will continue to test and report any changes here. Thank you.
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Re: IMQ@NAT kernel modul issue
Thanks. I’ll wait a bit longer but then will probably push that fix through.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: IMQ@NAT kernel modul issue
Is it just 46-ipt-imq removed or there is something else?Lantis wrote:It doesn't load at boot, but loads when needed.
Re: IMQ@NAT kernel modul issue
That’s all
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: IMQ@NAT kernel modul issue
Hey guys! How are you doing? 
Just update to 1.12.0@NETGEAR WNDR4300.
Set lan ip, masq, config QoS, pppoe, wifi and reading the log:
Many thanks!
Just update to 1.12.0@NETGEAR WNDR4300.
Set lan ip, masq, config QoS, pppoe, wifi and reading the log:
No warm?rmmod: module is not loaded
Many thanks!
Re: IMQ@NAT kernel modul issue
Greetings also ...
I don't have such reports. When I searched the net, I found that this command was deleting kernel modules - I suppose it's harmless ( https://linux.die.net/man/8/rmmod ).
I don't have such reports. When I searched the net, I found that this command was deleting kernel modules - I suppose it's harmless ( https://linux.die.net/man/8/rmmod ).
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Re: IMQ@NAT kernel modul issue
There is no problem
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: IMQ@NAT kernel modul issue
Many Thanks, Guys!
Have a nice week.
Have a nice week.