Webcam + QoS issue, 1.11.X (Built 20190405-0155 git@4685bd7f)

Want to share your OpenWrt / Gargoyle knowledge? Implemented a new feature? Let us know here.

Moderator: Moderators

Post Reply
ysy
Posts: 56
Joined: Sat Oct 28, 2017 12:24 pm
Location: Hong Kong !!

Webcam + QoS issue, 1.11.X (Built 20190405-0155 git@4685bd7f)

Post by ysy »

Hi All,

QoS worked flawlessly until after Webcam has been enabled. Knowing that Webcam is not a passionately pursued feature, just wonder if this is a known issue.

Thanks

Webcam : Logitech Webcam C210 (UVC Camera 046d:0819)
Last edited by ysy on Fri Apr 19, 2019 9:02 pm, edited 1 time in total.

RomanHK
Posts: 794
Joined: Sat May 04, 2013 4:18 pm
Location: Czech Republik

Re: 1.11.X (Built 20190405-0155 git@4685bd7f) Webcam + QoS issue

Post by RomanHK »

It might not be enough for the CPU.
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0

http://gargoyle.romanhk.cz custom builds by gargoyle users

ysy
Posts: 56
Joined: Sat Oct 28, 2017 12:24 pm
Location: Hong Kong !!

Re: 1.11.X (Built 20190405-0155 git@4685bd7f) Webcam + QoS issue

Post by ysy »

Thanks for the reply. Webcam seems to consume 8% cpu with 640x480 15fps setting.

Just found something new this morning: under Gargoyle UI's Status\Connection List page, QoS Up/Down column shows NA after enabling Webcam. It shows Normal or Priority (my setup) class prior to that.

Post Reply