wireless extender

Report wireless and/or network connectivity problems in this forum.

Moderator: Moderators

erez669
Posts: 112
Joined: Sun May 12, 2013 4:52 pm

wireless extender

Post by erez669 »

i have tp-link 1043nd v2.1 and it's working well as router, but i upgraded the network and my ISP has installed his router and his wireless signal is weak, i want to connect my router to the isp router as wireless extender and i don't know how to do it technically, i try to bridge lan to lan and choose wireless repeater but it isn't working.
thanks.

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: wireless extender

Post by Lantis »

You have several options, please choose one so that someone can provide you with more detailed suggestions.

1. Use Gargoyle in wired gateway mode and turn off the wifi on the ISP modem
2. Use Gargoyle in wireless repeater mode to extend the signal
3. Use Gargoyle as a wired dumb AP extender
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

erez669
Posts: 112
Joined: Sun May 12, 2013 4:52 pm

Re: wireless extender

Post by erez669 »

option 2 repeater extender signal.

erez669
Posts: 112
Joined: Sun May 12, 2013 4:52 pm

Re: wireless extender

Post by erez669 »

the only thing that i succeeded is creating seperate wifi network and not to extend the existing wifi, the repeater mode not working for me.
1043nd v2.1 firmware 1.9.0

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: wireless extender

Post by Lantis »

1.9.0 uses an older style of repeater which I can’t remember how to configure off the top of my head.
I recall it was important to make sure the chosen IP was in the same subnet as the upstream AP.

I would recommend updating to at least 1.10.0. At least then we can offer advise that is more current.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

erez669
Posts: 112
Joined: Sun May 12, 2013 4:52 pm

Re: wireless extender

Post by erez669 »

ok, but i'm afraid that v 1.10 will brick my unit.

erez669
Posts: 112
Joined: Sun May 12, 2013 4:52 pm

Re: wireless extender

Post by erez669 »

i'm searching the internet a lot of time and i found this article:

https://openwrt.org/packages/pkgdata/lu ... 9puTUNqHvU

how to add this plugin to get repeater mode to work?

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: wireless extender

Post by Lantis »

That is what 1.10.x uses already...
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

TurfnSurf
Posts: 1
Joined: Fri Mar 15, 2019 1:04 pm

Re: wireless extender

Post by TurfnSurf »

I want to "extend" my existing network into an area where WIFI is very weak and I cannot run an ethernet cable there.
I have a pair of Western Digital MyNet n750 routers, which have two radios (2.4 and 5 GHz).

Because WIFI bandwidth useage will be high, I was wondering if I could configure radio0 on both devices as access points and use radio1 as the backhaul channel between the two devices.

Ideally, WIFI and LAN clients on both sides could all see each other and share DHCP.

I have installed Gargoyle 1.11, but can't seem to figure out if my scheme described above is possible. Do I need to load any additional package(s)?

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: wireless extender

Post by Lantis »

Not using the GUI.
The GUI offers you two options
1. Bridge (with repeater): bridges the networks together but by the nature of a “repeater”, it broadcasts the same network (same band/channel) out
2. DHCP wireless: wireless client (separate subnet) but you can then recreate a network on either band.

You want a hybrid of these.
If you want to try it via the command line it should be pretty simple.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Post Reply