Problem after update 1.8->1.10 WDS systems

Report wireless and/or network connectivity problems in this forum.

Moderator: Moderators

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Problem after update 1.8->1.10 WDS systems

Post by Lantis »

You can access it at the bridge IP.
Your main router will be giving it a client IP which should be accessible.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Djago
Posts: 23
Joined: Sat Nov 28, 2015 6:08 pm

Re: Problem after update 1.8->1.10 WDS systems

Post by Djago »

Got it! I'll check later. Is there any advantage in using WDS instead of Client Bridge?

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Problem after update 1.8->1.10 WDS systems

Post by Lantis »

WDS truly puts all devices in the same subnet, but it can be a bit flakey when being used by different devices with different chipsets (the implementation isn’t quite standardised and every manufacturer has their own take on it).

Client bridge does a pseudo bridge to get everyone on the same network.
It generally works pretty well but there is some things that don’t work.
I think IGMP packets sometimes don’t get through? But there’s a way to fix that.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Djago
Posts: 23
Joined: Sat Nov 28, 2015 6:08 pm

Re: Problem after update 1.8->1.10 WDS systems

Post by Djago »

Nope... didn't work. Seems that WDS is broken here. I had to revert to Client Bridge.

Post Reply