WRT-160N V3 & WRT310N

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

Post Reply
martymoose
Posts: 2
Joined: Tue Oct 05, 2010 5:07 pm

WRT-160N V3 & WRT310N

Post by martymoose »

Hi I have 1 of each of these routers
both have dd-wrt install
i would love to update them but it looks like i carnt
If sombody wants to point me in the right direction to install
i am happy to test and and if it bricks oh well
ps the wrt-160n was in our local shop in the bargin bin for $20 aud
i bought 5 4 are in service with dd-wrt
cheers marty

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: WRT-160N V3 & WRT310N

Post by DoesItMatter »

Chipset Broadcom4785
* DD-WRT Wiki: Linksys WRT310N v1.0
RAM 32 MB
FLASH 4 MB
-----------------------------
You should be able to flash this one with the generic broadcom

gargoyle_1.3.5-brcm-2.4-squashfs.trx

Should be able to flash on the WRT310N v1.0

It HAS to be v1.0 - if you have a WRT310N v2.0 - don't flash Gargoyle...
---------------------------------
For the WRT-160N V3's

Chipset BCM4716
* DD-WRT Wiki: Linksys WRT150N & WRT160N
RAM 32 MB
FLASH 4 MB

I show these require K26 builds on DD-WRT - so they require
newer switch drivers and I'm not sure if those are in Backfire.
This would be something one of the developers and/or Eric
might know or be able to chime in on?

----------------------

Best bet to try Gargoyle is the WRT310N as long as its V1 hardware
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

martymoose
Posts: 2
Joined: Tue Oct 05, 2010 5:07 pm

Re: WRT-160N V3 & WRT310N

Post by martymoose »

tried the wrt310n
well looks like it got bricked
it boots but thats it
looking a bit further into it

the 160n well that for later

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: WRT-160N V3 & WRT310N

Post by DoesItMatter »

http://www.dd-wrt.com/wiki/index.php/Re ... ys_WRT310N

Try that on the WRT310N

It is a V1 right?

V2 won't work currently - not even with DD-WRT.
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

Ysdadsdslo
Posts: 12
Joined: Wed Aug 06, 2014 7:03 am

Re: WRT-160N V3 & WRT310N

Post by Ysdadsdslo »

I really liked this information.
dubli

Post Reply