Reporting in!
Gargoyle Version:1.7.X (Built 20150618-0226 git@fee548d)
Model:TP-Link TL-WDR4300 v1
Device Configuration:Gateway
Memory Usage:20.5MB / 123.4MB (16.6%)
Connections:262/4096
CPU Load Averages:0.13 / 0.24 / 0.16 (1/5/15 minutes)
I'm using a routed adsl modem.
Installed from Openwrt RC directly, without preserving settings.
Everything is working fine so far, quotas, transmission, Reg hack, etc.
Well done!
gargoyle-ispy 2015-June-18 23:01.torrent
Moderator: Moderators
-
- Posts: 108
- Joined: Sun Apr 08, 2012 6:54 am
Re: gargoyle-ispy 2015-June-18 23:01.torrent
now its working, i think it was problem due to i had partial settings of previous version..
Re: gargoyle-ispy 2015-June-18 23:01.torrent
When will you release new version of firmware ?
wdr3600 v1.5 @ Latest ispyisail build
Re: gargoyle-ispy 2015-June-18 23:01.torrent
I guess there's a DHCP bug, can please someone else check it?
I'm not able to have more than a /24 for dhcp.
I now set my LAN address as LAN 172.29.192.1 - 255.255.240.0 but under DHCP i can set start and end address only in the 172.29.192.[xxx] range.
i guess that caused a problem to me, because i had a lease time of 12 hours on a busy access point that i had to restart a few times because, I suppose it could not lend more addresses. I'm still investigating the root of the problem, but one thing i did was to lower lease time to just 2 hours and use a /20 as a netmask, but Connection/DHCP only allows me to edit the last octet for the dhcp range
BTW, using this version on a tplink 1043nd i have atm 95 clients connected with no issues.
I'm not able to have more than a /24 for dhcp.
I now set my LAN address as LAN 172.29.192.1 - 255.255.240.0 but under DHCP i can set start and end address only in the 172.29.192.[xxx] range.
i guess that caused a problem to me, because i had a lease time of 12 hours on a busy access point that i had to restart a few times because, I suppose it could not lend more addresses. I'm still investigating the root of the problem, but one thing i did was to lower lease time to just 2 hours and use a /20 as a netmask, but Connection/DHCP only allows me to edit the last octet for the dhcp range
BTW, using this version on a tplink 1043nd i have atm 95 clients connected with no issues.
-
- Posts: 108
- Joined: Sun Apr 08, 2012 6:54 am
Re: gargoyle-ispy 2015-June-18 23:01.torrent
i think i had a firewall problem.. because when i restart my router . in starting just for 1 minute the internet works.. after that it doesnt work and show error in web
"server not found"
"server not found"
Re: gargoyle-ispy 2015-June-18 23:01.torrent
Howdy ispyisail! Are you ok? I hope so.
Just checking, because you know, about a month without a new build
Hopefully this just means stability
Have a good day!
Just checking, because you know, about a month without a new build
Hopefully this just means stability
Have a good day!
Re: gargoyle-ispy 2015-June-18 23:01.torrent
My build machine is a bit sadedu wrote:Howdy ispyisail! Are you ok? I hope so.
Just checking, because you know, about a month without a new build
Hopefully this just means stability
Have a good day!
Using Ubuntu server
It appears that over a period of time ubuntu updates fill the /boot partion then all sorts of bad things happen.
Tried all kinds of fixes but it looks like a fresh build coming on.