1.6.2 stable for tl-wr841ND v9.0?

General discussion about Gargoyle, OpenWrt or anything else even remotely related to the project

Moderator: Moderators

Post Reply
XmaD
Posts: 10
Joined: Tue Mar 10, 2015 5:30 am

1.6.2 stable for tl-wr841ND v9.0?

Post by XmaD »

Hi everybody, :)

Has I said in the "succesfully flashed" topic, I've recently flashed my TL-WR1043ND with the 1.6.2 stable version, and since the it's working perfectly; now I've got a TL-WR841ND v9.0 and I would like to flash it and use it as a repeater of my 1043, but here is the problem, in the supported router section and in the download section I've founded out that there isn't any build for the v9,0 version. Searching in the forum I've founded that someone is working on a dev-build, but since I need for everyday usage I need a stable one, can you help me? :?:

thank you very much.

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: 1.6.2 stable for tl-wr841ND v9.0?

Post by DoesItMatter »

The 841N/D are showing as only having 4MB flash - you will
run out of space quickly and that can cause stability issues
(not always immediately, it can happen over time and require
the router to constantly be rebooted)

You are better off finding an 8MB flash router / 32MB Ram to
flash Gargoyle on, or possibly wait and use just stock
OpenWRT trunk on the 841N/D V9 when it is supported
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

XmaD
Posts: 10
Joined: Tue Mar 10, 2015 5:30 am

Re: 1.6.2 stable for tl-wr841ND v9.0?

Post by XmaD »

Thanks for answering, I was asking for these one because I've seen that's available the stable versione for some older release of these router, and since I need just the range-extender function I'll like to flash it to have all my network on the same system.

thank you again.

Post Reply