Firmware for WHR-HP-G54

[chigo58]

Eric, can you please guide me and recommend which stable firmware I should download for the good old Buffalo WHR-HPG54 BCM based router please?

would any of these do? or should i go with Backfire (10.03.1)

gargoyle_1.4.7-brcm47xx-squashfs.trx
gargoyle_1.6.2-brcm47xx-squashfs.trx
gargoyle_1.7.0-brcm47xx-generic-squashfs.trx

Thank you

[DoesItMatter]

http://wiki.openwrt.org/toh/buffalo/whr-hp-g54

See that post

1.4.7 would be your best bet

If you want to try - you could also try 1.5.6

1.5.7 and up uses attitude adjustment which causes
memory issues with 4mb flash/16mb ram devices

[chigo58]

Than you.

[sqlgeek]

Eric, can you please guide me and recommend which stable firmware I should download for the good old Buffalo WHR-HPG54 BCM based router please?

would any of these do? or should i go with Backfire (10.03.1)

gargoyle_1.4.7-brcm47xx-squashfs.trx
gargoyle_1.6.2-brcm47xx-squashfs.trx
gargoyle_1.7.0-brcm47xx-generic-squashfs.trx

Thank you

I am considering doing the same for my WHR-HP-G54 and was wondering which firmware you chose and if you had any problems or tips.

[chigo58]

I migrated directly from tomato 1.28 to this firmware

Code: Select all

gargoyle_1.4.7-brcm47xx-squashfs.trx

and have no regrets so far. Stable and works like a champ